13 research outputs found
Integrated Filters and Couplers for Next Generation Wireless Tranceivers
The main focus of this thesis is to investigate the critical nonlinear distortion issues affecting RF/Microwave components such as power amplifiers (PA) and develop new and improved solutions that will improve efficiency and linearity of next generation RF/Microwave mobile wireless communication systems. This research involves evaluating the nonlinear distortions in PA for different analog and digital signals which have been a major concern. The second harmonic injection technique is explored and used to effectively suppress nonlinear distortions. This method consists of simultaneously feeding back the second harmonics at the output of the power amplifier (PA) into the input of the PA. Simulated and measured results show improved linearity results. However, for increasing frequency bandwidth, the suppression abilities reduced which is a limitation for 4G LTE and 5G networks that require larger bandwidth (above 5 MHz). This thesis explores creative ways to deal with this major drawback. The injection technique was modified with the aid of a well-designed band-stop filter. The compact narrowband notch filter designed was able to suppress nonlinear distortions very effectively when used before the PA. The notch filter is also integrated in the injection technique for LTE carrier aggregation (CA) with multiple carriers and significant improvement in nonlinear distortion performance was observed. This thesis also considers maximizing efficiency alongside with improved linearity performance. To improve on the efficiency performance of the PA, the balanced PA configuration was investigated. However, another major challenge was that the couplers used in this configuration are very large in size at the desired operating frequency. In this thesis, this problem was solved by designing a compact branch line coupler. The novel coupler was simulated, fabricated and measured with performance comparable to its conventional equivalent and the coupler achieved substantial size reduction over others. The coupler is implemented in the balanced PA configuration giving improved input and output matching abilities. The proposed balanced PA is also implemented in 4G LTE and 5G wireless transmitters. This thesis provides simulation and measured results for all balanced PA cases with substantial efficiency and linearity improvements observed even for higher bandwidths (above 5 MHz). Additionally, the coupler is successfully integrated with rectifiers for improved energy harvesting performance and gave improved RF-dc conversion efficienc
Recommended from our members
Mutual coupling suppression in multiple microstrip antennas for wireless applications
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonMutual Coupling (MC) is the exchange of energy between multiple antennas when placed on
the same PCB, it being one of the critical parameters and a significant issue to be considered
when designing MIMO antennas. It appears significantly where multiple antennas are placed
very close to each other, with a high coupling affecting the performance of the array, in terms
radiation patterns, the reflection coefficient, and influencing the input impedance. Moreover;
it degrades the designed efficiency and gain since part of the power that could have been
radiated becomes absorbed by other adjacent antennas’ elements. The coupling mechanism
between multiple antenna elements is identified as being mainly through three different paths
or channels: surface wave propagation, space (direct) radiation and reactive near-field
coupling.
In this thesis, various coupling reduction approaches that are commonly employed in the
literature are categorised based on these mechanisms. Furthermore, a new comparative study
involving four different array types (PIFA, patch, monopole, and slot), is explained in detail.
This thesis primarily focuses on three interconnected research topics for mutual coupling
reduction based on new isolation approaches for different wireless applications (i.e. Narrowband,
Ultra-wide-band and Multi-band).
First, a new Fractal based Electromagnetic Band Gap (FEBG) decoupling structure between
PIFAs is proposed and investigated for a narrowband application. Excellent isolation of more
than 27 dB (Z-X plane) and 40 dB (Z-Y plane) is obtained without much degradation of the
radiation characteristics. It is found that the fractal structures can provide a band-stop effect,
because of their self-similarity features for a particular frequency band.
Second, new UWB-MIMO antennas are presented with high isolation characteristics.
Wideband isolation (≥ 31 dB) is achieved through the entire UWB band (3.1-10.6 GHz) by
etching a novel compact planar decoupling structure inserted between these multiple UWB
antennas.
Finally, new planar MIMO antennas are presented for multi-band (quad bands) applications.
A significant isolation improvement over the reference (≥ 17 dB) is achieved in each band by
etching a hybrid solution.
All the designs reported in this thesis have been fabricated and measured, with the simulated
and measured results agreeing well in most cases
Autonomous smart antenna systems for future mobile devices
Along with the current trend of wireless technology innovation, wideband, compact size,
low-profile, lightweight and multiple functional antenna and array designs are becoming more
attractive in many applications. Conventional wireless systems utilise omni-directional or
sectored antenna systems. The disadvantage of such antenna systems is that the
electromagnetic energy, required by a particular user located in a certain direction, is radiated
unnecessarily in every direction within the entire cell, hence causing interference to other
users in the system. In order to limit this source of interference and direct the energy to the
desired user, smart antenna systems have been investigated and developed. This thesis
presents the design, simulation, fabrication and full implementation of a novel smart antenna
system for future mobile applications.
The design and characterisation of a novel antenna structure and four-element liner array
geometry for smart antenna systems are proposed in the first stage of this study. Firstly, a
miniaturised microstrip-fed planar monopole antenna with Archimedean spiral slots to cover
WiFi/Bluetooth and LTE mobile applications has been demonstrated. The fundamental
structure of the proposed antenna element is a circular patch, which operates in high
frequency range, for the purpose of miniaturising the circuit dimension. In order to achieve a
multi-band performance, Archimedean spiral slots, acting as resonance paths, have been
etched on the circular patch antenna. Different shapes of Archimedean spiral slots have been
investigated and compared. The miniaturised and optimised antenna achieves a bandwidth of
2.2GHz to 2.9GHz covering WiFi/Bluetooth (2.45GHz) and LTE (2.6GHz) mobile standards.
Then a four-element linear antenna array geometry utilising the planar monopole elements
with Archimedean spiral slots has been described. All the relevant parameters have been
studied and evaluated. Different phase shifts are excited for the array elements, and the main
beam scanning range has been simulated and analysed.
The second stage of the study presents several feeding network structures, which control
the amplitude and phase excitations of the smart antenna elements. Research begins with the
basic Wilkinson power divider configuration. Then this thesis presents a compact feeding
network for circular antenna array, reconfigurable feeding networks for tuning the operating
frequency and polarisations, a feeding network on high resistivity silicon (HRS), and an ultrawide-band
(UWB) feeding network covering from 0.5GHz to 10GHz. The UWB feeding
network is used to establish the smart antenna array system.
Different topologies of phase shifters are discussed in the third stage, including ferrite
phase shifters and planar phase shifters using switched delay line and loaded transmission line
technologies. Diodes, FETs, MMIC and MEMS are integrated into different configurations.
Based on the comparison, a low loss and high accurate Hittite MMIC analogue phase shifter
has been selected and fully evaluated for this implementation. For the purpose of impedance
matching and field matching, compact and ultra wideband CPW-to-Microstrip transitions are
utilised between the phase shifters, feeding network and antenna elements. Finally, the fully
integrated smart antenna array achieves a 10dB reflection coefficient from 2.25GHz to
2.8GHz, which covers WiFi/Bluetooth (2.45GHz) and LTE (2.6GHz) mobile applications. By
appropriately controlling the voltage on the phase shifters, the main beam of the antenna array
is steered ±50° and ±52°, for 2.45GHz and 2.6GHz, respectively. Furthermore, the smart
antenna array demonstrates a gain of 8.5dBi with 40° 3dB bandwidth in broadside direction,
and has more than 10dB side lobe level suppression across the scan.
The final stage of the study investigates hardware and software automatic control systems
for the smart antenna array. Two microcontrollers PIC18F4550 and LPC1768 are utilised to
build the control PCBs. Using the graphical user interfaces provided in this thesis, it is able to
configure the beam steering of the smart antenna array, which allows the user to analyse and
optimise the signal strength of the received WiFi signals around the mobile device.
The design strategies proposed in this thesis contribute to the realisation of adaptable and
autonomous smart phone systems
Antenna Designs for 5G/IoT and Space Applications
This book is intended to shed some light on recent advances in antenna design for these new emerging applications and identify further research areas in this exciting field of communications technologies. Considering the specificity of the operational environment, e.g., huge distance, moving support (satellite), huge temperature drift, small dimension with respect to the distance, etc, antennas, are the fundamental device allowing to maintain a constant interoperability between ground station and satellite, or different satellites. High gain, stable (in temperature, and time) performances, long lifecycle are some of the requirements that necessitates special attention with respect to standard designs. The chapters of this book discuss various aspects of the above-mentioned list presenting the view of the authors. Some of the contributors are working strictly in the field (space), so they have a very targeted view on the subjects, while others with a more academic background, proposes futuristic solutions. We hope that interested reader, will find a fertile source of information, that combined with their interest/background will allow efficiently exploiting the combination of these two perspectives
Design and analysis of wideband passive microwave devices using planar structures
A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o
Composite right/left handed antennas for wireless lan applications
The term ‘metamaterial’ has become a buzzword in electromagnetics over the past decade. In recent years, advancement in this new scientific area has given birth to numerous discoveries and inventions based on the exotic properties exhibited by these materials. Some of the exotic properties like negative permittivity, negative permeability, and infinite propagation at a particular non-zero resonant frequency are shown by these artificial materials especially called as Composite Right Left Handed structures. Metamaterials gain these properties from their structural configuration rather than from their material constitution. The electromagnetic characteristics of metamaterials can be exploited to meet the ever increasing demand for lighter, compact, size reduced, multiband antennas. One of the most exciting applications of these CRLH transmission lines (TL) is the Zeroth Order Resonant Antennas. CRLH TL metamaterials when open or short ended produce standing waves and thus behave as resonant antennas. Miniaturization of antennas is possible through these structures as the resonant frequency is independent of the parameters of the antenna aperture. Due to their infinite wavelength propagation property; reduced size, quarter wavelength antennas can be designed