435 research outputs found

    Design of Compact BPF and Planar Diplexer for UMTS using Embedded-scheme Resonator

    Get PDF
    A compact planar diplexer utilizing embedded-scheme resonator (ESR) is designed for universal mobile telecommunications system (UMTS). The ESR is formed by embedding interdigital resonators into an open loop resonator. Based on the proposed ESR, a narrowband bandpass filter suitable for diplexer design is proposed, fabricated and measured. The measured results demonstrate that the filter exhibits good transmission properties within band and high frequency selectivity. The rectangular area occupied by the filter has overall dimensions only 0.086λg by 0.105λg, promises good potential in wireless communication systems that require compact size and high encapsulation quality. Then, a compact planar diplexer operating at the TX-band of 1920-1980MHz and the RX-band of 2110-2170MHz, which is composed of a meander T-junction and two filters initially separately designed, is synthesized, simulated and measured. Both the simulated and measured results indicate that satisfied impedance matching and good isolation between two paths have been achieved

    Design of Compact Planar Diplexer Based on Novel Spiral-Based Resonators

    Get PDF
    A miniaturized planar diplexer utilizing the novel spiral-based resonators is proposed. The given cell which is initially proposed in this article is composed of two separated rectangular spirals which are asymmetrical to each other and thus, it is called as ‘asymmetrical separated spirals resonator’ (ASSR). ASSR has more superior transmission property than the previous prototype and extremely compact dimension is also achieved. It is demonstrated that ASSR can exhibit bandpass performance with high frequency selectivity and good transmission property within the relatively low frequency band. Based on the given characteristic, one planar diplexer composed of T-junction and two ASSRs is synthesized and the fabricated prototype with compact dimension is achieved, thanks to ASSRs explored. Simultaneously, the transversal dimension of each channel is extremely compact because ASSRs are completely embedded in the feed lines. Both the simulated and measured results indicate that satisfactory impedance matching and high isolation between two channels are achieved. Furthermore, the proposed diplexer is uniplanar and no defected ground structure is introduced

    Development of planar filters and diplexers for wireless transceiver front ends

    Get PDF
    The central theme of this work is the design of compact microstrip bandpass filters and diplexers and the investigation of applications of these circuits in integrated transceiver RF front-end. The core of this thesis therefore presents the following stages of the work: - Analysis of coupled pseudo-interdigital resonators and lines; formulation of approximate transmission zero conditions and the investigation of coupling between these two resonators and related structures. - Development of compact, low loss and high selectivity microstrip pseudointerdigital bandpass filters. The design procedure of the filter consists of three simple steps, starting from the design of a parallel-coupled bandpass filter using the image parameter method applied to coupled microstrip lines. The development of compact microstrip diplexers composed of these filters uses the optimized common-transformer diplexing technique. An experimental verification of the developed filters and diplexers is made. - Investigation of the use of stepped impedance resonators (SIR) for the design of pseudo-interdigital bandpass filters with advanced characteristics. The design of compact dual-band filter using SIR. The investigation of possible improvement of the stopband of bandpass filters using bandstop generating structures. The application of SIR, defected ground structures (DGS), spur-lines, and opencircuited stubs in the design of compact bandpass filters with improved stopband. - The application of the proposed filters and diplexers in the design of integrated antenna filters and antenna diplexers. Improvement of performance of patch antennas, such as suppression of spurious harmonics of single-band antenna and improvement of bandwidth and selectivity of dual-band antenna, as a result of integration with filters. Separation of antennas’ bands and reduction of component count in integrated antenna diplexer

    Balanced-To-Balanced Microstrip Diplexer Based on Magnetically Coupled Resonators

    Get PDF
    Two balanced-To-balanced planar diplexers based on magnetically coupled microstrip resonators are proposed in this paper. For the first prototype, each channel/differential-output is composed of a second order single-band balanced bandpass filter based on open-loop resonators. For the second diplexer example, the filters composing the differential outputs are fourth order and are implemented by means of folded stepped-impedance resonators. The design procedure for the differential response is quite straightforward, since it is based on the use of the well-known external quality factor and coupling coefficients concepts. Common-mode is inherently rejected thanks to the benefits of magnetic coupling, which precludes common-mode transmission over a wide frequency range. The proposed structure also offers a high level of channel-To-channel isolation. To demonstrate the usefulness of the proposed idea, the two prototypes are simulated, fabricated, and measured. Good differential-mode and common-mode performance is observed in both examples. Simulations and measurements show good agreement.Ministerio de EconomĂ­a y Competitividad TEC2013-41913-P, TEC2017-84724-P, TEC2016-75650-RJunta de AndalucĂ­a P12-TIC-1435Generalitat de Catalunya 2014SGR-15

    Design and Performance of Microstrip Diplexers: A Review

    Get PDF
    The radiofrequency microstrip diplexers are widely demanded nowadays by modern wireless communication systems. Hence, several types of previously reported microstrip diplexers are reviewed and investigated in this work. Microstrip diplexers are three ports devices used for separating desired signals and delivering them through two (or more) different channels. The diplexers are investigated in three categories of dual-channel bandpass-bandpass diplexers, multichannel diplexers, and lowpassbandpass diplexers. The investigated multi-channel diplexers include a number of four-channel, six-channel, and eight-channel diplexers. Due to the hard design process, the number of reported diplexers with more than four channels is limited. The layout structures and theory design methods of the previously reported diplexers are studied. Moreover, their size and performance are compared while some explanations about their advantages and disadvantages are presented. This comparison includes insertion loss, return loss, fractional bandwidths, isolation, selectivity, and gaps between channels

    An Area-efficient Microstrip Diplexer with a Novel Structure and Low Group Delay for Microwave Wireless Applications

    Get PDF
    In this work, a novel structure of a microstrip diplexer consisting of coupled patch cells is presented. It works at 2.5 GHz and 4.7 GHz for wireless applications. The proposed structure is well miniaturized with a compact area of 0.015 λg2, fabricated on 0.787 mm substrate height. It has two wide fractional bandwidths (FBWs) of 28% and 17.9% at the lower and upper channels, respectively. Another feature of the proposed design is the low group delays, which are better than 0.4 ns for both channels. Moreover, the designed diplexer can suppress the harmonics up to 10 GHz. Meanwhile, the insertion losses at both channels are low. The design method is based on proposing an approximated equivalent LC circuit of a novel basic resonator. The information about the resonator behavior is extracted from the even and odd modes analysis of the proposed equivalent LC circuit. Finally, our introduced diplexer is fabricated and measured to verify the simulation results, where the simulated and measured results are in good agreement

    Microstrip diplexers with dual-mode patch resonant junctions

    Get PDF
    A conventional diplexer is made up of two channel filters which are connected to a transmission-line based signal distribution network. In this work, a novel diplexer has been proposed and designed using hairpin resonator filters that are joined together using a patch resonator. The patch being a dual-mode is made to resonate at the centre frequencies of the channel filters in corresponding modes. The patch functions as a signal splitter and at the same time as a resonant pole for each of the channel filters. A diplexer with the channel centre frequencies of 3.99 GHz and 4.39 GHz and 4% fractional bandwidth has been designed and tested. The simulated and measured results show very good agreements

    Design of Multiplexers for IoT-Based Applications Using Stub-Loaded Coupled-Line Resonators

    Get PDF
    This paper presents the design of microstrip-based multiplexers using stub-loaded coupled-line resonators. The proposed multiplexers consist of a diplexer and a triplexer, meticulously engineered to operate at specific frequency bands relevant to IoT systems: 2.55 GHz, 3.94 GHz, and 5.75 GHz. To enhance isolation and selectivity between the two passband regions, the diplexer incorporates five transmission poles (TPs) within its design. Similarly, the triplexer filter employs seven transmission poles to attain the desired performance across all three passbands. A comprehensive comparison was conducted against previously reported designs, considering crucial parameters such as size, insertion loss, return loss, and isolation between the two frequency bands. The fabrication of the diplexer and triplexer was carried out on a compact Rogers Duroid 5880 substrate. The experimental results demonstrate an exceptional performance, with the diplexer exhibiting a low insertion loss of 0.3 dB at 2.55 GHz and 0.4 dB at 3.94 GHz. The triplexer exhibits an insertion loss of 0.3 dB at 2.55 GHz, 0.37 dB at 3.94 GHz, and 0.2 dB at 5.75 GHz. The measured performance of the fabricated diplexer and triplexer aligns well with the simulated results, validating their effectiveness in meeting the desired specifications.publishedVersio

    Hybrid Microstrip Diplexer Design for Multi-band WiMAX Application in 2.3 and 3.5 GHz Bands

    Get PDF
    In this paper, a design of hybrid microstrip diplexer is proposed for multi-band Worldwide Interoperability for Microwave Access (WiMAX) application in 2.3 and 3.5 GHz bands. The diplexer consists of a combination of two different filter designs. These filters were designed based on microstripline coupling techniques in order to obtain minimum insertion losses and achieve the desired frequency bandwidth. Therefore, a coupled open loop ring resonator was chosen for the filter design in 2.3 GHz band and a folded coupled line resonator was chosen for the filter design in 3.5 GHz band. Then, these filters were combined with a ring manifold matching network to be a hybrid microstrip diplexer. Based on the results, good agreements were achieved between the simulation and measurement results in terms of insertion loss, return loss and bandwidth in the 2.3 and 3.5 GHz bands

    A Compact Negative Group Delay Microstrip Diplexer with Low Losses for 5G Applications: Design and Analysis

    Get PDF
    Microstrip Diplexers play an important role in modern wireless communication systems. In this paper, a novel compact microstrip diplexer based on spiral cells is presented. The proposed resonator primarily consists of two spiral thin lines connected to a pair of coupled lines. This novel resonator is analyzed mathematically to find its behavior and tune the dimensions of the final layout easily. Using the analyzed resonator, two bandpass filters (BPFs) are designed. Then, a novel high-performance microstrip diplexer is obtained by designing and integrating these two BPFs. The center frequencies of the first and second channels of the proposed diplexer are 1.86 GHz and 4.62 GHz, respectively. The proposed diplexer boasts a remarkably small size of 0.004 λg2 and features flat channels with low insertion losses of only 0.048 dB and 0.065 dB for the first and second channels, respectively. The maximum group delays of S21 and S31 are 0.31 ns, 0.86 ns, respectively, which are good values for a modern communication system. Meanwhile, inside its passbands for some frequency ranges, its group delays are negative. Thus, using this diplexer can decrease the signal dispersion. The 1st and 2nd passbands are wide with 47.3% and 47.1% fractional bandwidths (FBW), respectively. Therefore, this diplexer can be easily and successfully used in designing high-performance RF communication systems
    • 

    corecore