1,945 research outputs found
Compiler analysis for trace-level speculative multithreaded architectures
Trace-level speculative multithreaded processors exploit trace-level speculation by means of two threads working cooperatively. One thread, called the speculative thread, executes instructions ahead of the other by speculating on the result of several traces. The other thread executes speculated traces and verifies the speculation made by the first thread. In this paper, we propose a static program analysis for identifying candidate traces to be speculated. This approach identifies large regions of code whose live-output values may be successfully predicted. We present several heuristics to determine the best opportunities for dynamic speculation, based on compiler analysis and program profiling information. Simulation results show that the proposed trace recognition techniques achieve on average a speed-up close to 38% for a collection of SPEC2000 benchmarks.Peer ReviewedPostprint (published version
Bit Fusion: Bit-Level Dynamically Composable Architecture for Accelerating Deep Neural Networks
Fully realizing the potential of acceleration for Deep Neural Networks (DNNs)
requires understanding and leveraging algorithmic properties. This paper builds
upon the algorithmic insight that bitwidth of operations in DNNs can be reduced
without compromising their classification accuracy. However, to prevent
accuracy loss, the bitwidth varies significantly across DNNs and it may even be
adjusted for each layer. Thus, a fixed-bitwidth accelerator would either offer
limited benefits to accommodate the worst-case bitwidth requirements, or lead
to a degradation in final accuracy. To alleviate these deficiencies, this work
introduces dynamic bit-level fusion/decomposition as a new dimension in the
design of DNN accelerators. We explore this dimension by designing Bit Fusion,
a bit-flexible accelerator, that constitutes an array of bit-level processing
elements that dynamically fuse to match the bitwidth of individual DNN layers.
This flexibility in the architecture enables minimizing the computation and the
communication at the finest granularity possible with no loss in accuracy. We
evaluate the benefits of BitFusion using eight real-world feed-forward and
recurrent DNNs. The proposed microarchitecture is implemented in Verilog and
synthesized in 45 nm technology. Using the synthesis results and cycle accurate
simulation, we compare the benefits of Bit Fusion to two state-of-the-art DNN
accelerators, Eyeriss and Stripes. In the same area, frequency, and process
technology, BitFusion offers 3.9x speedup and 5.1x energy savings over Eyeriss.
Compared to Stripes, BitFusion provides 2.6x speedup and 3.9x energy reduction
at 45 nm node when BitFusion area and frequency are set to those of Stripes.
Scaling to GPU technology node of 16 nm, BitFusion almost matches the
performance of a 250-Watt Titan Xp, which uses 8-bit vector instructions, while
BitFusion merely consumes 895 milliwatts of power
A Survey on Compiler Autotuning using Machine Learning
Since the mid-1990s, researchers have been trying to use machine-learning
based approaches to solve a number of different compiler optimization problems.
These techniques primarily enhance the quality of the obtained results and,
more importantly, make it feasible to tackle two main compiler optimization
problems: optimization selection (choosing which optimizations to apply) and
phase-ordering (choosing the order of applying optimizations). The compiler
optimization space continues to grow due to the advancement of applications,
increasing number of compiler optimizations, and new target architectures.
Generic optimization passes in compilers cannot fully leverage newly introduced
optimizations and, therefore, cannot keep up with the pace of increasing
options. This survey summarizes and classifies the recent advances in using
machine learning for the compiler optimization field, particularly on the two
major problems of (1) selecting the best optimizations and (2) the
phase-ordering of optimizations. The survey highlights the approaches taken so
far, the obtained results, the fine-grain classification among different
approaches and finally, the influential papers of the field.Comment: version 5.0 (updated on September 2018)- Preprint Version For our
Accepted Journal @ ACM CSUR 2018 (42 pages) - This survey will be updated
quarterly here (Send me your new published papers to be added in the
subsequent version) History: Received November 2016; Revised August 2017;
Revised February 2018; Accepted March 2018
Mitosis based speculative multithreaded architectures
In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream,
with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread
applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law.
Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main
directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on
both these approaches, the proposed techniques so far have shown marginal performance improvements.
In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices).
Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application
Mitosis based speculative multithreaded architectures
In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream,
with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread
applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law.
Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main
directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on
both these approaches, the proposed techniques so far have shown marginal performance improvements.
In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices).
Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version
Improving latency tolerance of multithreading through decoupling
The increasing hardware complexity of dynamically scheduled superscalar processors may compromise the scalability of this organization to make an efficient use of future increases in transistor budget. SMT processors, designed over a superscalar core, are therefore directly concerned by this problem. The article presents and evaluates a novel processor microarchitecture which combines two paradigms: simultaneous multithreading and access/execute decoupling. Since its decoupled units issue instructions in order, this architecture is significantly less complex, in terms of critical path delays, than a centralized out-of-order design, and it is more effective for future growth in issue-width and clock speed. We investigate how both techniques complement each other. Since decoupling features an excellent memory latency hiding efficiency, the large amount of parallelism exploited by multithreading may be used to hide the latency of functional units and keep them fully utilized. The study shows that, by adding decoupling to a multithreaded architecture, fewer threads are needed to achieve maximum throughput. Therefore, in addition to the obvious hardware complexity reduction, it places lower demands on the memory system. The study also reveals that multithreading by itself exhibits little memory latency tolerance. Results suggest that most of the latency hiding effectiveness of SMT architectures comes from the dynamic scheduling. On the other hand, decoupling is very effective at hiding memory latency. An increase in the cache miss penalty from 1 to 32 cycles reduces the performance of a 4-context multithreaded decoupled processor by less than 2 percent. For the nondecoupled multithreaded processor, the loss of performance is about 23 percent.Peer ReviewedPostprint (published version
- …