Energy Efficient Neocortex-Inspired Systems with On-Device Learning

Shifting the compute workloads from cloud toward edge devices can significantly improve the overall latency for inference and learning. On the contrary this paradigm shift exacerbates the resource constraints on the edge devices. Neuromorphic computing architectures, inspired by the neural processes, are natural substrates for edge devices. They offer co-located memory, in-situ training, energy efficiency, high memory density, and compute capacity in a small form factor. Owing to these features, in the recent past, there has been a rapid proliferation of hybrid CMOS/Memristor neuromorphic computing systems. However, most of these systems offer limited plasticity, target either spatial or temporal input streams, and are not demonstrated on large scale heterogeneous tasks. There is a critical knowledge gap in designing scalable neuromorphic systems that can support hybrid plasticity for spatio-temporal input streams on edge devices. This research proposes Pyragrid, a low latency and energy efficient neuromorphic computing system for processing spatio-temporal information natively on the edge. Pyragrid is a full-scale custom hybrid CMOS/Memristor architecture with analog computational modules and an underlying digital communication scheme. Pyragrid is designed for hierarchical temporal memory, a biomimetic sequence memory algorithm inspired by the neocortex. It features a novel synthetic synapses representation that enables dynamic synaptic pathways with reduced memory usage and interconnects. The dynamic growth in the synaptic pathways is emulated in the memristor device physical behavior, while the synaptic modulation is enabled through a custom training scheme optimized for area and power. Pyragrid features data reuse, in-memory computing, and event-driven sparse local computing to reduce data movement by ~44x and maximize system throughput and power efficiency by ~3x and ~161x over custom CMOS digital design. The innate sparsity in Pyragrid results in overall robustness to noise and device failure, particularly when processing visual input and predicting time series sequences. Porting the proposed system on edge devices can enhance their computational capability, response time, and battery life

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.Siirretty Doriast

Leveraging RRAM to Design Efficient Digital Circuits and Systems for Beyond Von Neumann in-Memory Computing

Due to the physical separation of their processing elements and storage units, contemporary digital computers are confronted with the thorny memory-wall problem. The strategy of in-memory computing has been considered as a promising solution to overcome the von Neumann bottleneck and design high-performance, energy-efficient computing systems. Moreover, in the post Moore era, post-CMOS technologies have received intense interests for possible future digital logic applications beyond the CMOS scaling limits. Motivated by these perspectives from system level to device level, this thesis proposes two effective processing-in-memory schemes to construct the non-von Neumann systems based on nonvolatile resistive random-access memory (RRAM). In the first scheme, we present functionally complete stateful logic gates based on a CMOS-compatible 2-transistor-2-RRAM (2T2R) structure. In this structure, the programmable logic functionality is determined by the amplitude of operation voltages, rather than its circuit topology. A reconfigurable 3T2R chain with programmable interconnects is used to implement complex combinational logic circuits. The design has a highly regular and symmetric circuit structure, making it easy for design, integration, and fabrication, while the operations are flexible yet clean. Easily integrated as 3-dimensional (3-D) stacked arrays, two proposed memory architectures not only serve as regular 3-D memory arrays but also perform in-memory-computing within the same layer and between the stacked layers. The second scheme leverages hybrid logic in the same hardware to design efficient digital circuits and systems with low computational complexity. Multiple-bit ripple-carry adder (RCA), pipelined RCA, and prefix tree adder are shown as example circuits, using the same regular chain structure, to validate the design efficiency. The design principles, computational complexity, and performance are discussed and compared to the CMOS technology and other state-of-the-art post-CMOS implementations. The overall evaluation shows superior performance in speed and area. The result of the study could build a technology cell library that can be potentially used as input to a technology-mapping algorithm. The proposed hybrid-logic methodology presents prospect of hardware acceleration and future beyond-von Neumann in-memory computing architectures

Energy Efficient and Error Resilient Neuromorphic Computing in VLSI

Realization of the conventional Von Neumann architecture faces increasing challenges due to growing process variations, device reliability and power consumption. As an appealing architectural solution, brain-inspired neuromorphic computing has drawn a great deal of research interest due to its potential improved scalability and power efficiency, and better suitability in processing complex tasks. Moreover, inherit error resilience in neuromorphic computing allows remarkable power and energy savings by exploiting approximate computing. This dissertation focuses on a scalable and energy efficient neurocomputing architecture which leverages emerging memristor nanodevices and a novel approximate arithmetic for cognitive computing. First, brain-inspired digital neuromorphic processor (DNP) architecture with memristive synaptic crossbar is presented for large scale spiking neural networks. We leverage memristor nanodevices to build an N ×N crossbar array to store not only multibit synaptic weight values but also the network configuration data with significantly reduced area cost. Additionally, the crossbar array is accessible both column- and row-wise to significantly expedite the synaptic weight update process for on-chip learning. The proposed digital pulse width modulator (PWM) readily creates a binary pulse with various durations to read and write the multilevel memristors with low cost. Our design integrates N digital leaky integrate-and-fire (LIF) silicon neurons to mimic their biological counterparts and the respective on-chip learning circuits for implementing spike timing dependent plasticity (STDP) learning rules. The proposed column based analog-to-digital conversion (ADC) scheme accumulates the pre-synaptic weights of a neuron efficiently and reduces silicon area by using only one shared arithmetic unit for processing LIF operations of all N neurons. With 256 silicon neurons, the learning circuits and 64K synapses, the power dissipation and area of our design are evaluated as 6.45 mW and 1.86 mm2, respectively, in a 90 nm CMOS technology. Furthermore, arithmetic computations contribute significantly to the overall processing time and power of the proposed architecture. In particular, addition and comparison operations represent 88.5% and 42.9% of processing time and power for digital LIF computation, respectively. Hence, by exploiting the built-in resilience of the presented neuromorphic architecture, we propose novel approximate adder and comparator designs to significantly reduce energy consumption with a very low er- ror rate. The significantly improved error rate and critical path delay stem from a novel carry prediction technique that leverages the information from less significant input bits in a parallel manner. An error magnitude reduction scheme is proposed to further reduce amount of error once detected with low cost in the proposed adder design. Implemented in a commercial 90 nm CMOS process, it is shown that the proposed adder is up to 2.4× faster and 43% more energy efficient over traditional adders while having an error rate of only 0.18%. Additionally, the proposed com- parator achieves an error rate of less than 0.1% and an energy reduction of up to 4.9× compared to the conventional ones. The proposed arithmetic has been adopted in a VLSI-based neuromorphic character recognition chip using unsupervised learning. The approximation errors of the proposed arithmetic units have been shown to have negligible impacts on the training process. Moreover, the energy saving of up to 66.5% over traditional arithmetic units is achieved for the neuromorphic chip with scaled supply levels

On microelectronic self-learning cognitive chip systems

After a brief review of machine learning techniques and applications, this Ph.D. thesis examines several approaches for implementing machine learning architectures and algorithms into hardware within our laboratory. From this interdisciplinary background support, we have motivations for novel approaches that we intend to follow as an objective of innovative hardware implementations of dynamically self-reconfigurable logic for enhanced self-adaptive, self-(re)organizing and eventually self-assembling machine learning systems, while developing this new particular area of research. And after reviewing some relevant background of robotic control methods followed by most recent advanced cognitive controllers, this Ph.D. thesis suggests that amongst many well-known ways of designing operational technologies, the design methodologies of those leading-edge high-tech devices such as cognitive chips that may well lead to intelligent machines exhibiting conscious phenomena should crucially be restricted to extremely well defined constraints. Roboticists also need those as specifications to help decide upfront on otherwise infinitely free hardware/software design details. In addition and most importantly, we propose these specifications as methodological guidelines tightly related to ethics and the nowadays well-identified workings of the human body and of its psyche

A Practical Investigation into Achieving Bio-Plausibility in Evo-Devo Neural Microcircuits Feasible in an FPGA

Many researchers has conjectured, argued, or in some cases demonstrated, that bio-plausibility can bring about emergent properties such as adaptability, scalability, fault-tolerance, self-repair, reliability, and autonomy to bio-inspired intelligent systems. Evolutionary-developmental (evo-devo) spiking neural networks are a very bio-plausible mixture of such bio-inspired intelligent systems that have been proposed and studied by a few researchers. However, the general trend is that the complexity and thus the computational cost grow with the bio-plausibility of the system. FPGAs (Field- Programmable Gate Arrays) have been used and proved to be one of the flexible and cost efficient hardware platforms for research' and development of such evo-devo systems. However, mapping a bio-plausible evo-devo spiking neural network to an FPGA is a daunting task full of different constraints and trade-offs that makes it, if not infeasible, very challenging. This thesis explores the challenges, trade-offs, constraints, practical issues, and some possible approaches in achieving bio-plausibility in creating evolutionary developmental spiking neural microcircuits in an FPGA through a practical investigation along with a series of case studies. In this study, the system performance, cost, reliability, scalability, availability, and design and testing time and complexity are defined as measures for feasibility of a system and structural accuracy and consistency with the current knowledge in biology as measures for bio-plausibility. Investigation of the challenges starts with the hardware platform selection and then neuron, cortex, and evo-devo models and integration of these models into a whole bio-inspired intelligent system are examined one by one. For further practical investigation, a new PLAQIF Digital Neuron model, a novel Cortex model, and a new multicellular LGRN evo-devo model are designed, implemented and tested as case studies. Results and their implications for the researchers, designers of such systems, and FPGA manufacturers are discussed and concluded in form of general trends, trade-offs, suggestions, and recommendations