Design Trade‐Offs for FPGA Implementation of LDPC Decoders

Low density parity check (LDPC) decoders represent important throughput bottlenecks, as well as major cost and power-consuming components in today\u27s digital circuits for wireless communication and storage. They present a wide range of architectural choices, with different throughput, cost, and error correction capability trade-offs. In this book chapter, we will present an overview of the main design options in the architecture and implementation of these circuits on field programmable gate array (FPGA) devices. We will present the mapping of the main units within the LDPC decoders on the specific embedded components of FPGA device. We will review architectural trade-offs for both flooded and layered scheduling strategies in their FPGA implementation

Density Evolution and Functional Threshold for the Noisy Min-Sum Decoder

This paper investigates the behavior of the Min-Sum decoder running on noisy devices. The aim is to evaluate the robustness of the decoder in the presence of computation noise, e.g. due to faulty logic in the processing units, which represents a new source of errors that may occur during the decoding process. To this end, we first introduce probabilistic models for the arithmetic and logic units of the the finite-precision Min-Sum decoder, and then carry out the density evolution analysis of the noisy Min-Sum decoder. We show that in some particular cases, the noise introduced by the device can help the Min-Sum decoder to escape from fixed points attractors, and may actually result in an increased correction capacity with respect to the noiseless decoder. We also reveal the existence of a specific threshold phenomenon, referred to as functional threshold. The behavior of the noisy decoder is demonstrated in the asymptotic limit of the code-length -- by using "noisy" density evolution equations -- and it is also verified in the finite-length case by Monte-Carlo simulation.Comment: 46 pages (draft version); extended version of the paper with same title, submitted to IEEE Transactions on Communication

Research on energy-efficient VLSI decoder for LDPC code

制度:新 ; 報告番号:甲3742号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6113Waseda Universit

Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder

As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor

Flexible LDPC Decoder Architectures

Flexible channel decoding is getting significance with the increase in number of wireless standards and modes within a standard. A flexible channel decoder is a solution providing interstandard and intrastandard support without change in hardware. However, the design of efficient implementation of flexible low-density parity-check (LDPC) code decoders satisfying area, speed, and power constraints is a challenging task and still requires considerable research effort. This paper provides an overview of state-of-the-art in the design of flexible LDPC decoders. The published solutions are evaluated at two levels of architectural design: the processing element (PE) and the interconnection structure. A qualitative and quantitative analysis of different design choices is carried out, and comparison is provided in terms of achieved flexibility, throughput, decoding efficiency, and area (power) consumption

Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder

As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor

A High-Performance and Low-Complexity 5G LDPC Decoder: Algorithm and Implementation

5G New Radio (NR) has stringent demands on both performance and complexity for the design of low-density parity-check (LDPC) decoding algorithms and corresponding VLSI implementations. Furthermore, decoders must fully support the wide range of all 5G NR blocklengths and code rates, which is a significant challenge. In this paper, we present a high-performance and low-complexity LDPC decoder, tailor-made to fulfill the 5G requirements. First, to close the gap between belief propagation (BP) decoding and its approximations in hardware, we propose an extension of adjusted min-sum decoding, called generalized adjusted min-sum (GA-MS) decoding. This decoding algorithm flexibly truncates the incoming messages at the check node level and carefully approximates the non-linear functions of BP decoding to balance the error-rate and hardware complexity. Numerical results demonstrate that the proposed fixed-point GAMS has only a minor gap of 0.1 dB compared to floating-point BP under various scenarios of 5G standard specifications. Secondly, we present a fully reconfigurable 5G NR LDPC decoder implementation based on GA-MS decoding. Given that memory occupies a substantial portion of the decoder area, we adopt multiple data compression and approximation techniques to reduce 42.2% of the memory overhead. The corresponding 28nm FD-SOI ASIC decoder has a core area of 1.823 mm2 and operates at 895 MHz. It is compatible with all 5G NR LDPC codes and achieves a peak throughput of 24.42 Gbps and a maximum area efficiency of 13.40 Gbps/mm2 at 4 decoding iterations.Comment: 14 pages, 14 figure

Design and implementation of decoders for error correction in high-speed communication systems

This thesis is focused on the design and implementation of binary low-density parity-check (LDPC) code decoders for high-speed modern communication systems. The basic of LDPC codes and the performance and bottlenecks, in terms of complexity and hardware efficiency, of the main soft-decision and hard-decision decoding algorithms (such as Min-Sum, Optimized 2-bit Min-Sum and Reliability-based iterative Majority-Logic) are analyzed. The complexity and performance of those algorithms are improved to allow efficient hardware architectures. A new decoding algorithm called One-Minimum Min-Sum is proposed. It reduces considerably the complexity of the check node update equations of the Min-Sum algorithm. The second minimum is estimated from the first minimum value by a means of a linear approximation that allows a dynamic adjustment. The Optimized 2-bit Min-Sum algorithm is modified to initialize it with the complete LLR values and to introduce the extrinsic information in the messages sent from the variable nodes. Its variable node equation is reformulated to reduce its complexity. Both algorithms were tested for the (2048,1723) RS-based LDPC code and (16129,15372) LDPC code using an FPGA-based hardware emulator. They exhibit BER performance very close to Min-Sum algorithm and do not introduce early error-floor. In order to show the hardware advantages of the proposed algorithms, hardware decoders were implemented in a 90 nm CMOS process and FPGA devices based on two types of architectures: full-parallel and partial-parallel one with horizontal layered schedule. The results show that the decoders are more area-time efficient than other published decoders and that the low-complexity of the Modified Optimized 2-bit Min-Sum allows the implementation of 10 Gbps decoders in current FPGA devices. Finally, a new hard-decision decoding algorithm, the Historical-Extrinsic Reliability-Based Iterative Decoder, is presented. This algorithm introduces the new idea of considering hard-decision votes as soft-decision to compute the extrinsic information of previous iterations. It is suitable for high-rate codes and improves the BER performance of the previous RBI-MLGD algorithms, with similar complexity.Esta tesis se ha centrado en el diseño e implementación de decodificadores binarios basados en códigos de comprobación de paridad de baja densidad (LDPC) válidos para los sistemas de comunicación modernos de alta velocidad. Los conceptos básicos de códigos LDPC, sus prestaciones y cuellos de botella, en términos de complejidad y eficiencia hardware, fueron analizados para los principales algoritmos de decisión soft y decisión hard (como Min-Sum, Optimized 2-bit Min-Sum y Reliability-based iterative Majority-Logic). La complejidad y prestaciones de estos algoritmos se han mejorado para conseguir arquitecturas hardware eficientes. Se ha propuesto un nuevo algoritmo de decodificación llamado One-Minimum Min-Sum. Éste reduce considerablemente la complejidad de las ecuaciones de actualización del nodo de comprobación del algoritmo Min-Sum. El segundo mínimo se ha estimado a partir del valor del primer mínimo por medio de una aproximación lineal, la cuál permite un ajuste dinámico. El algoritmo Optimized 2-bit Min-Sum se ha modificado para ser inicializado con los valores LLR e introducir la información extrínseca en los mensajes enviados desde los nodos variables. La ecuación del nodo variable de este algoritmo ha sido reformulada para reducir su complejidad. Ambos algoritmos fueron probados para el código (2048,1723) RS-based LDPC y para el código (16129,15372) LDPC utilizando un emulador hardware implementado en un dispositivo FPGA. Éstos han alcanzado unas prestaciones de BER muy cercanas a las del algoritmo Min-Sum evitando, además, la aparición temprana del fenómeno denominado suelo del error. Con el objetivo de mostrar las ventajas hardware de los algoritmos propuestos, los decodificadores se implementaron en hardware utilizando tecnología CMOS de 90 nm y en dispositivos FPGA basados en dos tipos de arquitecturas: completamente paralela y parcialmente paralela utilizando el método de actualización por capas horizontales. Los resultados muestran que los decodificadores propuestos e implementados son más eficientes en área-tiempo que otros decodificadores publicados y que la baja complejidad del algoritmo Modified Optimized 2-bit Min-Sum permite la implementación de decodificadores en los dispositivos FPGA actuales consiguiendo una tasa de 10 Gbps. Finalmente, se ha presentado un nuevo algoritmo de decodificación de decisión hard, el Historical-Extrinsic Reliability-Based Iterative Decoder. Este algoritmo introduce la nueva idea de considerar los votos de decisión hard como decisión soft para calcular la información extrínseca de iteracions anteriores. Este algoritmo es adecuado para códigos de alta velocidad y mejora el rendimiento BER de los algoritmos RBI-MLGD anteriores, con una complejidad similar.Aquesta tesi s'ha centrat en el disseny i implementació de descodificadors binaris basats en codis de comprovació de paritat de baixa densitat (LDPC) vàlids per als sistemes de comunicació moderns d'alta velocitat. Els conceptes bàsics de codis LDPC, les seues prestacions i colls de botella, en termes de complexitat i eficiència hardware, van ser analitzats pels principals algoritmes de decisió soft i decisió hard (com el Min-Sum, Optimized 2-bit Min-Sum y Reliability-based iterative Majority-Logic). La complexitat i prestacions d'aquests algoritmes s'han millorat per aconseguir arquitectures hardware eficients. S'ha proposat un nou algoritme de descodificació anomenat One-Minimum Min-Sum. Aquest redueix considerablement la complexitat de les equacions d'actualització del node de comprovació del algoritme Min-Sum. El segon mínim s'ha estimat a partir del valor del primer mínim per mitjà d'una aproximació lineal, la qual permet un ajust dinàmic. L'algoritme Optimized 2-bit Min-Sum s'ha modificat per ser inicialitzat amb els valors LLR i introduir la informació extrínseca en els missatges enviats des dels nodes variables. L'equació del node variable d'aquest algoritme ha sigut reformulada per reduir la seva complexitat. Tots dos algoritmes van ser provats per al codi (2048,1723) RS-based LDPC i per al codi (16129,15372) LDPC utilitzant un emulador hardware implementat en un dispositiu FPGA. Aquests han aconseguit unes prestacions BER molt properes a les del algoritme Min-Sum evitant, a més, l'aparició primerenca del fenomen denominat sòl de l'error. Per tal de mostrar els avantatges hardware dels algoritmes proposats, els descodificadors es varen implementar en hardware utilitzan una tecnologia CMOS d'uns 90 nm i en dispositius FPGA basats en dos tipus d'arquitectures: completament paral·lela i parcialment paral·lela utilitzant el mètode d'actualització per capes horitzontals. Els resultats mostren que els descodificadors proposats i implementats són més eficients en àrea-temps que altres descodificadors publicats i que la baixa complexitat del algoritme Modified Optimized 2-bit Min-Sum permet la implementació de decodificadors en els dispositius FPGA actuals obtenint una taxa de 10 Gbps. Finalment, s'ha presentat un nou algoritme de descodificació de decisió hard, el Historical-Extrinsic Reliability-Based Iterative Decoder. Aquest algoritme presenta la nova idea de considerar els vots de decisió hard com decisió soft per calcular la informació extrínseca d'iteracions anteriors. Aquest algoritme és adequat per als codis d'alta taxa i millora el rendiment BER dels algoritmes RBI-MLGD anteriors, amb una complexitat similar.Català Pérez, JM. (2017). Design and implementation of decoders for error correction in high-speed communication systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86152TESI

Design and Evaluation of the Efficiency of Channel Coding LDPC Codes for 5G Information Technology

This paper proposes a result of an investigation of a topical problem and the development of models for efficient coding in information networks based on codes with a low density of parity check. The main advantage of the technique is the presented recommendations for choosing a signal-code construction is carried out taking into account the code rate and the number of iterations decoding for envisaging the defined noise immunity indices. The noise immunity of signal-code constructions based on low-density codes has been increased by combining them with multi position digital modulation. This solution eventually allowed to develop a strategy for decoder designing of such codes and to optimize the code structure for a specific information network. To test the effectiveness of the proposed method, MATLAB simulations are carried out under for various Information channels binary symmetric channel (BSC), a channel with additive white Gaussian noise (AWGN), binary asymmetric channel (BAC), asymmetric channel Z type. In addition, different code rates were used during the experiment. The study of signal-code constructions with differential modulation is presented. The efficiency of different decoding algorithms is investigated. The advantage of the obtained results over the known ones consists in determining the maximum noise immunity for the proposed codes. The energy gain was on the order of 6 dB, and an increase in the number of decoding iterations from 3 to 10 leads to a gain in coding energy of 5 dB. Envisaged that the results obtained can be very useful in the development of practical coding schemes in 5G networks