Mass flow meter using the triboelectric effect for measurement in cryogenics

The use of triboelectric charge to measure the mass flow rate of cryogens for the Space Shuttle Main Engine was investigated. Cross correlation of the triboelectric charge signals was used to determine the transit time of the cryogen between two sensor locations in a .75-in tube. The ring electrode sensors were mounted in a removable spool piece. Three spool pieces were constructed for delivery, each with a different design. One set of electronics for implementation of the cross correlation and flow calculation was constructed for delivery. Tests were made using a laboratory flow loop using liquid freon and transformer oil. The measured flow precision was 1 percent and the response was linear. The natural frequency distribution of the triboelectric signal was approximately 1/f. The sensor electrodes should have an axial length less than approximately one/tenth pipe diameter. The electrode spacing should be less than approximately one pipe diameter. Tests using liquid nitrogen demonstrated poor tribo-signal to noise ratio. Most of the noise was microphonic and common to both electrode systems. The common noise rejection facility of the correlator was successful in compensating for this noise but the signal was too small to enable reliable demonstration of the technique in liquid nitrogen

Techniques and errors in measuring cross- correlation and cross-spectral density functions

Techniques and errors in measuring cross spectral density and cross correlation functions of stationary dynamic pressure dat

System Identification, Diagnosis, and Built-In Self-Test of High Switching Frequency DC-DC Converters

abstract: Complex electronic systems include multiple power domains and drastically varying dynamic power consumption patterns, requiring the use of multiple power conversion and regulation units. High frequency switching converters have been gaining prominence in the DC-DC converter market due to smaller solution size (higher power density) and higher efficiency. As the filter components become smaller in value and size, they are unfortunately also subject to higher process variations and worse degradation profiles jeopardizing stable operation of the power supply. This dissertation presents techniques to track changes in the dynamic loop characteristics of the DC-DC converters without disturbing the normal mode of operation. A digital pseudo-noise (PN) based stimulus is used to excite the DC-DC system at various circuit nodes to calculate the corresponding closed-loop impulse response. The test signal energy is spread over a wide bandwidth and the signal analysis is achieved by correlating the PN input sequence with the disturbed output generated, thereby accumulating the desired behavior over time. A mixed-signal cross-correlation circuit is used to derive on-chip impulse responses, with smaller memory and lower computational requirement in comparison to a digital correlator approach. Model reference based parametric and non-parametric techniques are discussed to analyze the impulse response results in both time and frequency domain. The proposed techniques can extract open-loop phase margin and closed-loop unity-gain frequency within 5.2% and 4.1% error, respectively, for the load current range of 30-200mA. Converter parameters such as natural frequency (ω_n ), quality factor (Q), and center frequency (ω_c ) can be estimated within 3.6%, 4.7%, and 3.8% error respectively, over load inductance of 4.7-10.3µH, and filter capacitance of 200-400nF. A 5-MHz switching frequency, 5-8.125V input voltage range, voltage-mode controlled DC-DC buck converter is designed for the proposed built-in self-test (BIST) analysis. The converter output voltage range is 3.3-5V and the supported maximum load current is 450mA. The peak efficiency of the converter is 87.93%. The proposed converter is fabricated on a 0.6µm 6-layer-metal Silicon-On-Insulator (SOI) technology with a die area of 9mm^2 . The area impact due to the system identification blocks including related I/O structures is 3.8% and they consume 530µA quiescent current during operation.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Statistical Mechanics and Visual Signal Processing

The nervous system solves a wide variety of problems in signal processing. In many cases the performance of the nervous system is so good that it apporaches fundamental physical limits, such as the limits imposed by diffraction and photon shot noise in vision. In this paper we show how to use the language of statistical field theory to address and solve problems in signal processing, that is problems in which one must estimate some aspect of the environment from the data in an array of sensors. In the field theory formulation the optimal estimator can be written as an expectation value in an ensemble where the input data act as external field. Problems at low signal-to-noise ratio can be solved in perturbation theory, while high signal-to-noise ratios are treated with a saddle-point approximation. These ideas are illustrated in detail by an example of visual motion estimation which is chosen to model a problem solved by the fly's brain. In this problem the optimal estimator has a rich structure, adapting to various parameters of the environment such as the mean-square contrast and the correlation time of contrast fluctuations. This structure is in qualitative accord with existing measurements on motion sensitive neurons in the fly's brain, and we argue that the adaptive properties of the optimal estimator may help resolve conlficts among different interpretations of these data. Finally we propose some crucial direct tests of the adaptive behavior.Comment: 34pp, LaTeX, PUPT-143

The Expanded Very Large Array

In almost 30 years of operation, the Very Large Array (VLA) has proved to be a remarkably flexible and productive radio telescope. However, the basic capabilities of the VLA have changed little since it was designed. A major expansion utilizing modern technology is currently underway to improve the capabilities of the VLA by at least an order of magnitude in both sensitivity and in frequency coverage. The primary elements of the Expanded Very Large Array (EVLA) project include new or upgraded receivers for continuous frequency coverage from 1 to 50 GHz, new local oscillator, intermediate frequency, and wide bandwidth data transmission systems to carry signals with 16 GHz total bandwidth from each antenna, and a new digital correlator with the capability to process this bandwidth with an unprecedented number of frequency channels for an imaging array. Also included are a new monitor and control system and new software that will provide telescope ease of use. Scheduled for completion in 2012, the EVLA will provide the world research community with a flexible, powerful, general-purpose telescope to address current and future astronomical issues.Comment: Added journal reference: published in Proceedings of the IEEE, Special Issue on Advances in Radio Astronomy, August 2009, vol. 97, No. 8, 1448-1462 Six figures, one tabl

A Sliding Correlator Channel Sounder for Ultra-Wideband Measurements

This body of work forms a detailed and comprehensive guide for those interested in performing broadband wireless channel measurements. Discussion addresses the theoretical and practical aspects of designing and implementing a sliding correlator channel sounder, as well as how such a system may be used to measure and model the ultra-wideband wireless channel. The specific contributions of this work are as follows: Developed a systematic methodology for designing optimal sliding correlator-based channel sounders. Constructed a UWB channel sounder based upon a 17-bit LFSR that attained 1.66 ns of temporal resolution and 34 dB of dynamic range. Performed an exemplary measurement campaign of the UWB channel from which UWB angular spreads and RMS delay spreads are reported. The design procedure developed in Chapter 3 will allow researchers to build optimal channel sounders for investigating next-generation wireless channels. Chapter 4 s discussion addresses the real-world challenges of constructing a high performance sliding correlator channel sounder. Finally, the measurement campaign discussed in Chapter 5 outlines a procedure for investigating the spatio-temporal characteristics of the wireless channel and provides some of the first examples of UWB angular spread measurements.M.S.Committee Chair: Durgin, Gregory; Committee Member: Ingram, Mary Ann; Committee Member: Smith, Whi

Spread spectrum mobile communication experiment using ETS-V satellite

The spread spectrum technique is attractive for application to mobile satellite communications, because of its random access capability, immunity to inter-system interference, and robustness to overloading. A novel direct sequence spread spectrum communication equipment is developed for land mobile satellite applications. The equipment is developed based on a matched filter technique to improve the initial acquisition performance. The data rate is 2.4 kilobits per sec. and the PN clock rate is 2.4552 mega-Hz. This equipment also has a function of measuring the multipath delay profile of land mobile satellite channel, making use of a correlation property of a PN code. This paper gives an outline of the equipment and the field test results with ETS-V satellite

Development and application of spread-spectrum ultrasonic evaluation technique

A new approach to ultrasonic NDE called spread-spectrum ultrasonic evaluation (SSUE) is investigated. It regards the ultrasonic nondestructive evaluation as an acoustic-impulse-response estimation and characterization problem. This problem has been compared with the analogous problems of radio-detection-and-ranging from communications field and the seismic exploration problem of geophysics. Out of the various options for the impulse response estimation, the continuous pseudorandom signal correlation method has been shown to be the optimum for peak-power limited systems such as the ultrasonic NDE systems. The problem of self-noise and its consequences in pseudorandom correlation systems is investigated, followed by the development of various optimum and sub-optimum approaches to self-noise elimination. After verifying the theoretical results through computer simulations, a lab-grade SSUE instrument was developed and analyzed. Also, a new, efficient method for the implementation of DSP-based correlator is developed. The application of SSUE technique to various practical NDE situations like, flaw detection, velocity/thickness measurements, attenuation measurement, global integrity assessment, etc., was investigated through various laboratory experiments. It is concluded that the SSUE technique holds great promise for all ultrasonic NDE applications where high signal attenuation results into the loss of signal-to-noise ratios beyond workable limits;SSUE employs a non-traditional approach to ultrasonic NDE that makes it more robust and powerful. One significant feature of the SSUE technique is that it overcomes the maximum average power limitation of the existing techniques. Conventional pulsed ultrasonic NDE systems are peak power limited by the transducer breakdown voltage and the average power is limited by the narrow pulse duration which is important to maintain good resolution. In certain NDE applications there are factors other than the transducer peak power limitation, which limit the amplitude of the transmitted signal. In case of medical ultrasound devices, for example, the peak power limit arises from the risk of causing tissue damage. For such kind of applications, SSUE has a direct solution to increasing the average power while maintaining the resolution. Ultrasonic NDE instrument in a field or industrial environment is subject to all kinds of acoustic and electromagnetic interferences. This results into a degradation of instrument sensitivity and reliability. SSUE technique, by virtue of its robust operating principal, is capable of interference rejection to a much larger extent

Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation

New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The system implementation, using the universal software radio peripheral (USRP) and GNU Radio, is described and compared to previous work. By overcoming computational limitations and performing direct-sequence spread-spectrum (DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive CIR estimation. We validate the channel sounder and present a drive test campaign which measures hundreds of channels between WiFi access points and an in-vehicle receiver in urban and suburban areas