Wide Band Propagation in Train-to-Train Scenarios - Measurement Campaign and First Results

Within the next decades the railway systems will change to fully autonomous high speed trains (HSTs). An increase in efficiency and safety and a reduction of costs would go hand in hand. Today’s centralized railway management system and established regulations can not cope with trains driving within the absolute braking distance as it would be necessary for electronic coupling or platooning maneuvers. Hence, to ensure safety and reliability, new applications and changes in the train control and management are necessary. Such changes demand new reliable control communication links between train-to-train (T2T) and future developments on train-to-ground (T2G). T2G will be covered by long term evolution-railway (LTE-R) which shall replace today’s global system for mobile communications-railway (GSM-R). The decentralized T2T communication is hardly investigated and no technology has been selected. This publication focuses on the wide band propagation for T2T scenarios and describes a extensive channel sounding measurement campaign with two HSTs. First results of T2T communication at high speed conditions in different environments are presented

Path Loss Models and Large Scale Fading Statistics for C-Band Train-to-Train Communication

The profound knowledge of wireless propagation is essential for wireless communication between vehicles. To evolve and test communication standards we need channel models in representative environments to neither over-, nor underestimate the effect of the surrounding environment and the movement of the vehicles; typical environments for railway communication are railway station, open field and hilly environments. We introduce train-to-train (T2T) path loss models and large scale fading statistics based on channel sounder measurement data as a first step towards a geometry-based stochastic channel model (GSCM). The models represent the mentioned typical environments for railway applications. We compare the results with previous published intelligent transportation system (ITS-G5) measurement based models and highlight the differences

Millimeter Wave MISO-OFDM Transmissions in an Intra-Wagon Environment

[EN] In this paper, the maximum achievable throughput is analyzed in the intra-wagon channel when multiple-input single-output (MISO) and orthogonal frequency division multiplexing (OFDM), MISO-OFDM, techniques are used. This analysis is performed from real wideband propagation channel measurements at 28 and 37 GHz, two potential frequency bands to deploy the future fifth-generation (5G) wireless communications networks. Four different scenarios in terms of the access point (AP) and user equipment (UE) positions inside the wagon have been considered, using 4 and 8 antennas at the AP. The performance of both quasi-orthogonal space-time block code (QSTBC), combined with Hadamard matrices, and transmit beamforming techniques is studied and evaluated from simulation results. The simulation results take into account the signal-to-noise ratio (SNR) and the antenna correlation for each antenna array configuration at the AP. These results provide useful insight to better understand the intra-wagon channel properties and deploy the future 5G wireless networks in this particular scenario at mmWave frequencies, where high-data-rates are expected to support different types of digital applications.This work was supported in part by the Ministerio de Economia y Competitividad MINECO, Spain, under Grant TEC2016-78028C3-2-P and Grant TEC2017-86779-C2-2-R and in part by the European FEDER Funds.Sanchis Borrás, C.; Molina-García-Pardo, J.; Rubio Arjona, L.; Pascual-García, J.; Rodrigo Peñarrocha, VM.; Juan Llacer, L.; Reig, J. (2021). Millimeter Wave MISO-OFDM Transmissions in an Intra-Wagon Environment. IEEE Transactions on Intelligent Transportation Systems. 22(8):4899-4908. https://doi.org/10.1109/TITS.2020.2983028S4899490822

Enhancing the Cultural Heritage through Adaptive Reuse. A Multicriteria Approach to Evaluate the Castello Visconteo in Cusago (Italy)

Cultural heritage can play a strategic role in developing a sustainable built environment, contributing to the improvement of the economic, social, and environmental productivity of a city. Human activities are constantly affecting the quality of the environment and altering the ecosystems, which produce negative consequences also on human wellbeing. Within this context, it has been much discussed how cities and the built environment can counteract this process by supporting more sustainable development. Adaptive reuse is defined as “a process that changes a disused or ineffective item into a new item that can be used for a different purpose”, which strongly triggers the sustainable development of cities. It can be recognized as a promoter of economic growth, social wellbeing, and environmental preservation, given its capability of both preserving past values and creating new ones. The adaptive reuse matches the main points of the circular economy, seen as the sustainable economy, which is aimed at the reduction of natural resource extraction and environmental impact by extending the useful life of materials and promoting recovery, reuse, and regeneration processes. Given these premises, the current contribution aimed to evaluate alternative scenarios for reuse in Castello Visconteo in Cusago, located in the Lombardy region (Italy), and understanding how adaptive reuse could contribute to generating new values within a circular economy perspective. In detail, four alternative scenarios were proposed to face the new needs born during the COVID-19 pandemic period. Since both intangible and tangible values must be considered, a multicriteria decision analysis (MCDA) has been applied by combining economic and qualitative indicators to define the most suitable function for its adaptive reuse. In detail, the Novel Approach to Imprecise Assessment and Decision Environments (NAIADE) was used to identify the best alternative solution based on the opinions of conflicting stakeholders. The innovativeness of the contribution is given by the combination of different methodologies, the preservation of the memory and the generation of new values, and the consideration of adaptive reuse as a strategy for the achievement of sustainable development within a circular economy perspective

Detection of GNSS multipath with time-differenced code-minus-carrier for land-based applications

Ground transportation systems demand accurate and robust localizationfunctions. Satellite navigation is considered a key element in those systems, but its position determination can be highly corrupted in urban environments because of the presence of reflected signals (i.e. multipath). This paper deals with the detection of multipath in the code measurements of GNSS receivers for mobile users in urban scenarios. First, we discuss the different alternatives and limitations to properly isolate multipath autonomously at the receiver based on Code-Minus-Carrier (CMC) techniques in challenging GNSS applications.We then propose a practical methodology to design a suitable multipath detector based on the time difference of CMC. All the analysis and evaluations are supported with real measurements collected in Railway scenarios.This work has been funded by the European GSA H2020 project ERSAT-GGC. The authors would like to thank all the partners of the ERSAT-GGC consortium.Peer ReviewedPostprint (published version

Propagation and Wireless Channel Modeling Development on Wide-Sense Vehicle-to-X Communications

The need for improving the safety and the efficiency of transportation systems has become of extreme importance. In this regard, the concept of vehicle-to-X (V2X) communication has been introduced with the purpose of providing wireless communication technology in vehicular networks. Not like the traditional views, the wide-sense V2X (WSV2X) communications in this paper are defined by including not only vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications but also train-to-X (T2X) communications constituted of train-to-train (T2T) and train-to-infrastructure (T2I) communications. All the information related to the wide-sense V2X channels, such as the standardization, scenarios, characters, and modeling philosophies, is organized and summarized to form the comprehensive understanding of the development of the WSV2X channels

Development and certification of mixed-criticality embedded systems based on probabilistic timing analysis

An increasing variety of emerging systems relentlessly replaces or augments the functionality of mechanical subsystems with embedded electronics. For quantity, complexity, and use, the safety of such subsystems is an increasingly important matter. Accordingly, those systems are subject to safety certification to demonstrate system's safety by rigorous development processes and hardware/software constraints. The massive augment in embedded processors' complexity renders the arduous certification task significantly harder to achieve. The focus of this thesis is to address the certification challenges in multicore architectures: despite their potential to integrate several applications on a single platform, their inherent complexity imperils their timing predictability and certification. Recently, the Measurement-Based Probabilistic Timing Analysis (MBPTA) technique emerged as an alternative to deal with hardware/software complexity. The innovation that MBPTA brings about is, however, a major step from current certification procedures and standards. The particular contributions of this Thesis include: (i) the definition of certification arguments for mixed-criticality integration upon multicore processors. In particular we propose a set of safety mechanisms and procedures as required to comply with functional safety standards. For timing predictability, (ii) we present a quantitative approach to assess the likelihood of execution-time exceedance events with respect to the risk reduction requirements on safety standards. To this end, we build upon the MBPTA approach and we present the design of a safety-related source of randomization (SoR), that plays a key role in the platform-level randomization needed by MBPTA. And (iii) we evaluate current certification guidance with respect to emerging high performance design trends like caches. Overall, this Thesis pushes the certification limits in the use of multicore and MBPTA technology in Critical Real-Time Embedded Systems (CRTES) and paves the way towards their adoption in industry.Una creciente variedad de sistemas emergentes reemplazan o aumentan la funcionalidad de subsistemas mecánicos con componentes electrónicos embebidos. El aumento en la cantidad y complejidad de dichos subsistemas electrónicos así como su cometido, hacen de su seguridad una cuestión de creciente importancia. Tanto es así que la comercialización de estos sistemas críticos está sujeta a rigurosos procesos de certificación donde se garantiza la seguridad del sistema mediante estrictas restricciones en el proceso de desarrollo y diseño de su hardware y software. Esta tesis trata de abordar los nuevos retos y dificultades dadas por la introducción de procesadores multi-núcleo en dichos sistemas críticos: aunque su mayor rendimiento despierta el interés de la industria para integrar múltiples aplicaciones en una sola plataforma, suponen una mayor complejidad. Su arquitectura desafía su análisis temporal mediante los métodos tradicionales y, asimismo, su certificación es cada vez más compleja y costosa. Con el fin de lidiar con estas limitaciones, recientemente se ha desarrollado una novedosa técnica de análisis temporal probabilístico basado en medidas (MBPTA). La innovación de esta técnica, sin embargo, supone un gran cambio cultural respecto a los estándares y procedimientos tradicionales de certificación. En esta línea, las contribuciones de esta tesis están agrupadas en tres ejes principales: (i) definición de argumentos de seguridad para la certificación de aplicaciones de criticidad-mixta sobre plataformas multi-núcleo. Se definen, en particular, mecanismos de seguridad, técnicas de diagnóstico y reacción de faltas acorde con el estándar IEC 61508 sobre una arquitectura multi-núcleo de referencia. Respecto al análisis temporal, (ii) presentamos la cuantificación de la probabilidad de exceder un límite temporal y su relación con los requisitos de reducción de riesgos derivados de los estándares de seguridad funcional. Con este fin, nos basamos en la técnica MBPTA y presentamos el diseño de una fuente de números aleatorios segura; un componente clave para conseguir las propiedades aleatorias requeridas por MBPTA a nivel de plataforma. Por último, (iii) extrapolamos las guías actuales para la certificación de arquitecturas multi-núcleo a una solución comercial de 8 núcleos y las evaluamos con respecto a las tendencias emergentes de diseño de alto rendimiento (caches). Con estas contribuciones, esta tesis trata de abordar los retos que el uso de procesadores multi-núcleo y MBPTA implican en el proceso de certificación de sistemas críticos de tiempo real y facilita, de esta forma, su adopción por la industria.Postprint (published version