Mean value formulas for twisted Edwards curves

R. Feng, and H. Wu recently established a certain mean-value formula for the x-coordinates of the n-division points on an elliptic curve given in Weierstrass form (A mean value formula for elliptic curves, 2010, available at http://eprint.iacr.org/2009/586.pdf ). We prove a similar result for both the x and y-coordinates on a twisted Edwards elliptic curve

A mean value formula for elliptic curves

It is proved in this paper that for any point on an elliptic curve, the mean value of x-coordinates of its n-division points is the same as its x-coordinate and that of y-coordinates of its n-division points is n times of its y-coordinate

DNA folding: structural and mechanical properties of the two-angle model for chromatin

We present a theoretical analysis of the structural and mechanical properties of the 30-nm chromatin fiber. Our study is based on the two-angle model introduced by Woodcock et al. (Woodcock, C. L., S. A. Grigoryev, R. A. Horowitz, and N. Whitaker. 1993. PNAS 90:9021-9025) that describes the chromatin fiber geometry in terms of the entry-exit angle of the nucleosomal DNA and the rotational setting of the neighboring nucleosomes with respect to each other. We explore analytically the different structures that arise from this building principle, and demonstrate that the geometry with the highest density is close to the one found in native chromatin fibers under physiological conditions. On the basis of this model we calculate mechanical properties of the fiber under stretching. We obtain expressions for the stress-strain characteristics which show good agreement with the results of recent stretching experiments (Cui, Y., and C. Bustamante. 2000. PNAS 97:127-132) and computer simulations (Katritch, V., C. Bustamante, and W. K. Olson. 2000. J. Mol. Biol. 295:29-40), and which provide simple physical insights into correlations between the structural and elastic properties of chromatin.Comment: 23 pages, 6 figures, to be published in Biophys.

Curves, codes, and cryptography

This thesis deals with two topics: elliptic-curve cryptography and code-based cryptography. In 2007 elliptic-curve cryptography received a boost from the introduction of a new way of representing elliptic curves. Edwards, generalizing an example from Euler and Gauss, presented an addition law for the curves x2 + y2 = c2(1 + x2y2) over non-binary fields. Edwards showed that every elliptic curve can be expressed in this form as long as the underlying field is algebraically closed. Bernstein and Lange found fast explicit formulas for addition and doubling in coordinates (X : Y : Z) representing (x, y) = (X/Z, Y/Z) on these curves, and showed that these explicit formulas save time in elliptic-curve cryptography. It is easy to see that all of these curves are isomorphic to curves x2 + y2 = 1 + dx2y2 which now are called "Edwards curves" and whose shape covers considerably more elliptic curves over a finite field than x2 + y2 = c2(1 + x2y2). In this thesis the Edwards addition law is generalized to cover all curves ax2 +y2 = 1+dx2y2 which now are called "twisted Edwards curves." The fast explicit formulas for addition and doubling presented here are almost as fast in the general case as they are for the special case a = 1. This generalization brings the speed of the Edwards addition law to every Montgomery curve. Tripling formulas for Edwards curves can be used for double-base scalar multiplication where a multiple of a point is computed using a series of additions, doublings, and triplings. The use of double-base chains for elliptic-curve scalar multiplication for elliptic curves in various shapes is investigated in this thesis. It turns out that not only are Edwards curves among the fastest curve shapes, but also that the speed of doublings on Edwards curves renders double bases obsolete for this curve shape. Elliptic curves in Edwards form and twisted Edwards form can be used to speed up the Elliptic-Curve Method for integer factorization (ECM). We show how to construct elliptic curves in Edwards form and twisted Edwards form with large torsion groups which are used by the EECM-MPFQ implementation of ECM. Code-based cryptography was invented by McEliece in 1978. The McEliece public-key cryptosystem uses as public key a hidden Goppa code over a finite field. Encryption in McEliece’s system is remarkably fast (a matrix-vector multiplication). This system is rarely used in implementations. The main complaint is that the public key is too large. The McEliece cryptosystem recently regained attention with the advent of post-quantum cryptography, a new field in cryptography which deals with public-key systems without (known) vulnerabilities to attacks by quantum computers. The McEliece cryptosystem is one of them. In this thesis we underline the strength of the McEliece cryptosystem by improving attacks against it and by coming up with smaller-key variants. McEliece proposed to use binary Goppa codes. For these codes the most effective attacks rely on information-set decoding. In this thesis we present an attack developed together with Daniel J. Bernstein and Tanja Lange which uses and improves Stern’s idea of collision decoding. This attack is faster by a factor of more than 150 than previous attacks, bringing it within reach of a moderate computer cluster. We were able to extract a plaintext from a ciphertext by decoding 50 errors in a [1024, 524] binary code. The attack should not be interpreted as destroying the McEliece cryptosystem. However, the attack demonstrates that the original parameters were chosen too small. Building on this work the collision-decoding algorithm is generalized in two directions. First, we generalize the improved collision-decoding algorithm for codes over arbitrary fields and give a precise analysis of the running time. We use the analysis to propose parameters for the McEliece cryptosystem with Goppa codes over fields such as F31. Second, collision decoding is generalized to ball-collision decoding in the case of binary linear codes. Ball-collision decoding is asymptotically faster than any previous attack against the McEliece cryptosystem. Another way to strengthen the system is to use codes with a larger error-correction capability. This thesis presents "wild Goppa codes" which contain the classical binary Goppa codes as a special case. We explain how to encrypt and decrypt messages in the McEliece cryptosystem when using wild Goppa codes. The size of the public key can be reduced by using wild Goppa codes over moderate fields which is explained by evaluating the security of the "Wild McEliece" cryptosystem against our generalized collision attack for codes over finite fields. Code-based cryptography not only deals with public-key cryptography: a code-based hash function "FSB"was submitted to NIST’s SHA-3 competition, a competition to establish a new standard for cryptographic hashing. Wagner’s generalized birthday attack is a generic attack which can be used to find collisions in the compression function of FSB. However, applying Wagner’s algorithm is a challenge in storage-restricted environments. The FSBday project showed how to successfully mount the generalized birthday attack on 8 nodes of the Coding and Cryptography Computer Cluster (CCCC) at Technische Universiteit Eindhoven to find collisions in the toy version FSB48 which is contained in the submission to NIST

Optimizations of Isogeny-based Key Exchange

Supersingular Isogeny Diffie-Hellman (SIDH) is a key exchange scheme that is believed to be quantum-resistant. It is based on the difficulty of finding a certain isogeny between given elliptic curves. Over the last nine years, optimizations have been proposed that significantly increased the performance of its implementations. Today, SIDH is a promising candidate in the US National Institute for Standards and Technology’s (NIST’s) post-quantum cryptography standardization process. This work is a self-contained introduction to the active research on SIDH from a high-level, algorithmic lens. After an introduction to elliptic curves and SIDH itself, we describe the mathematical and algorithmic building blocks of the fastest known implementations. Regarding elliptic curves, we describe which algorithms, data structures and trade-offs regard- ing elliptic curve arithmetic and isogeny computations exist and quantify their runtime cost in field operations. These findings are then tailored to the situation of SIDH. As a result, we give efficient algorithms for the performance-critical parts of the protocol

Generation, Verification, and Attacks on Elliptic Curves and their Applications in Signal Protocol

Elliptic curves (EC) are widely studied due to their mathematical and cryptographic properties. Cryptographers have used the properties of EC to construct elliptic curve cryptosystems (ECC). ECC are based on the assumption of hardness of special instances of the discrete logarithm problem in EC. One of the strong merits of ECC is providing the same cryptographic strength with smaller key size compared to other public key cryptosystems. A 256 bit ECC can provide similar cryptographic strength as a 3072 bit RSA cryptosystem. Due to smaller key sizes, elliptic curves are an attractive option in devices with limited storage capacity. It is therefore essential to understand how to generate these curves, verify their correctness and assure that they are resistant against attacks. The security of an EC cryptosystem is determined by the choice of the curve that is used in that cryptosystem. Over the years, a number of elliptic curves were introduced for cryptographic use. Elliptic curves such as FRP256V1, NIST P-256, Secp256k1 or SM2 curve are widely used in many applications like cryptocurrencies, transport layer protocol and Internet messaging applications. Another type of popular curves are Curve25519 introduced by Dan Bernstein and Curve448 introduced by Mike Hamburg, which are used in an end to end encryption protocol called Signal. This protocol is used in popular messaging applications like WhatsApp, Signal Messenger and Facebook Messenger. Recently, there has been a growing distrust among security researchers against the previously standardized curves. We have seen backdoors in the elliptic curve cryptosystems like the DUAL_EC_DRBG function that was standardized by NIST, and suspicious random seeds that were used in NIST P-curves. We can say that many of the previously standardized curves lack transparency in their generation and verification. We focus on transparent generation and verification of elliptic curves. We generate curves based on NIST standards and propose new standards to generate special types of elliptic curves. We test their resistance against the known attacks that target the ECC. Finally, we demonstrate ECDLP attacks on small curves with weak structure