865 research outputs found
The electronically steerable parasitic array radiator antenna for wireless communications : signal processing and emerging techniques
Smart antenna technology is expected to play an important role in future wireless
communication networks in order to use the spectrum efficiently, improve the
quality of service, reduce the costs of establishing new wireless paradigms and
reduce the energy consumption in wireless networks. Generally, smart antennas
exploit multiple widely spaced active elements, which are connected to separate
radio frequency (RF) chains. Therefore, they are only applicable to base stations
(BSs) and access points, by contrast with modern compact wireless terminals with
constraints on size, power and complexity. This dissertation considers an alternative
smart antenna system the electronically steerable parasitic array radiator
(ESPAR) which uses only a single RF chain, coupled with multiple parasitic elements.
The ESPAR antenna is of significant interest because of its
flexibility in beamforming by tuning a number of easy-to-implement reactance loads connected
to parasitic elements; however, parasitic elements require no expensive RF circuits.
This work concentrates on the study of the ESPAR antenna for compact
transceivers in order to achieve some emerging techniques in wireless communications.
The work begins by presenting the work principle and modeling of the ESPAR
antenna and describes the reactance-domain signal processing that is suited to the
single active antenna array, which are fundamental factors throughout this thesis.
The major contribution in this chapter is the adaptive beamforming method
based on the ESPAR antenna. In order to achieve fast convergent beamforming
for the ESPAR antenna, a modified minimum variance distortionless response
(MVDR) beamfomer is proposed. With reactance-domain signal processing, the
ESPAR array obtains a correlation matrix of receive signals as the input to the
MVDR optimization problem. To design a set of feasible reactance loads for a desired
beampattern, the MVDR optimization problem is reformulated as a convex
optimization problem constraining an optimized weight vector close to a feasible
solution. Finally, the necessary reactance loads are optimized by iterating the convex problem and a simple projector. In addition, the generic algorithm-based
beamforming method has also studied for the ESPAR antenna.
Blind interference alignment (BIA) is a promising technique for providing an optimal
degree of freedom in a multi-user, multiple-inputsingle-output broadcast
channel, without the requirements of channel state information at the transmitters.
Its key is antenna mode switching at the receive antenna. The ESPAR
antenna is able to provide a practical solution to beampattern switching (one
kind of antenna mode switching) for the implementation of BIA. In this chapter,
three beamforming methods are proposed for providing the required number of
beampatterns that are exploited across one super symbol for creating the channel
fluctuation patterns seen by receivers. These manually created channel
fluctuation
patterns are jointly combined with the designed spacetime precoding in order to
align the inter-user interference. Furthermore, the directional beampatterns designed
in the ESPAR antenna are demonstrated to improve the performance of
BIA by alleviating the noise amplification.
The ESPAR antenna is studied as the solution to interference mitigation in small
cell networks. Specifically, ESPARs analog beamforming presented in the previous
chapter is exploited to suppress inter-cell interference for the system scenario,
scheduling only one user to be served by each small BS at a single time. In
addition, the ESPAR-based BIA is employed to mitigate both inter-cell and intracell
interference for the system scenario, scheduling a small number of users to be
simultaneously served by each small BS for a single time.
In the cognitive radio (CR) paradigm, the ESPAR antenna is employed for spatial
spectrum sensing in order to utilize the new angle dimension in the spectrum
space besides the conventional frequency, time and space dimensions. The twostage
spatial spectrum sensing method is proposed based on the ESPAR antenna
being targeted at identifying white spectrum space, including the new angle dimension.
At the first stage, the occupancy of a specific frequency band is detected
by conventional spectrum-sensing methods, including energy detector and
eigenvalue-based methods implemented with the switched-beam ESPAR antenna. With the presence of primary users, their directions are estimated at the second
stage, by high-resolution angle-of-arrival (AoA) estimation algorithms. Specifically, the compressive sensing technology has been studied for AoA detection with
the ESPAR antenna, which is demonstrated to provide high-resolution estimation
results and even to outperform the reactance-domain multiple signal classification
Beam Selection and Discrete Power Allocation in Opportunistic Cognitive Radio Systems with Limited Feedback Using ESPAR Antennas
We consider an opportunistic cognitive radio (CR) system consisting of a
primary user (PU), secondary transmitter (SUtx), and secondary receiver (SUrx),
where SUtx is equipped with an electrically steerable parasitic array radiator
(ESPAR) antenna with the capability of choosing one beam among M beams for
sensing and communication, and there is a limited feedback channel from SUrx to
SUtx. Taking a holistic approach, we develop a framework for integrated
sector-based spectrum sensing and sector-based data communication. Upon sensing
the channel busy, SUtx determines the beam corresponding to PU's orientation.
Upon sensing the channel idle, SUtx transmits data to SUrx, using the selected
beam corresponding to the strongest channel between SUtx and SUrx. We formulate
a constrained optimization problem, where SUtx-SUrx link ergodic capacity is
maximized, subject to average transmit and interference power constraints, and
the optimization variables are sensing duration, thresholds of channel
quantizer at SUrx, and transmit power levels at SUtx. Since this problem is
non-convex we develop a suboptimal computationally efficient iterative
algorithm to find the solution. Our results demonstrate that our CR system
yields a significantly higher capacity, and lower outage and symbol error
probabilities, compared with a CR system that its SUtx has an omni-directional
antenna.Comment: This paper has been submitted to IEEE Transactions on Cognitive
Communications and Networkin
Communication Subsystems for Emerging Wireless Technologies
The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels
Optimal Wideband LPDA Design for Efficient Multimedia Content Delivery over Emerging Mobile Computing Systems
An optimal synthesis of a wideband Log-Periodic
Dipole Array (LPDA) is introduced in the present study. The LPDA optimization is performed under several requirements concerning the standing wave ratio, the forward gain, the gain flatness, the front-to-back ratio and the side lobe level, over a
wide frequency range. The LPDA geometry that complies with the above requirements is suitable for efficient multimedia content delivery. The optimization process is accomplished by applying a recently introduced method called Invasive Weed Optimization (IWO). The method has already been compared to other evolutionary methods and has shown superiority in solving complex non-linear problems in telecommunications and electromagnetics. In the present study, the IWO method has been chosen to optimize an LPDA for operation in the frequency range
800-3300 MHz. Due to its excellent performance, the LPDA can effectively be used for multimedia content reception over future mobile computing systems
2008 Index IEEE Transactions on Control Systems Technology Vol. 16
This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index
- …