Estimating Target Heights Based on the Earth Curvature Model and Micromultipath Effect in Skywave OTH Radar

Skywave over-the-horizon (OTH) radar systems have important long-range strategic warning values. They exploit skywave propagation reflection of high frequency signals from the ionosphere, which provides the ultra-long-range surveillance capabilities to detect and track maneuvering targets. Current OTH radar systems are capable of localizing targets in range and azimuth but are unable to achieve reliable instantaneous altitude estimation. Most existing height measurement methods of skywave OTH radar systems have taken advantage of the micromultipath effect and been considered in the flat earth model. However, the flat earth model is not proper since large error is inevitable, when the detection range is over one thousand kilometers. In order to avoid the error caused by the flat earth model, in this paper, an earth curvature model is introduced into OTH radar altimetry methods. The simulation results show that application of the earth curvature model can effectively reduce the estimation error

An Analysis of the Potential for Using Over-the-Horizon Radar Systems for Space Surveillance

The Australian Defence Force is investigating the development of a space surveillance system. While several dedicated facilities for space surveillance are in operation around the world, Australia s Over-The-Horizon Radar (OTHR) network has some potential for this role. The OTHR operates in the HF band and is constrained by the propagation effects of the ionosphere. A spherically stratified ionospheric model and a model for a nominal OTHR antenna are developed that allow calculation of path propagation, power distribution, and clutter returns. A software-based radar receiver processing system is modeled to determine detection probabilities and the minimum detectable radar cross-section of targets in typical low earth orbit (LEO) trajectories. The high clutter power levels, coupled with long target ranges and high velocities, mean that range-Doppler tradeoffs have a great impact on the resulting detection capabilities. While the system as modeled has the potential to provide some coverage for LEO targets, operational constraints mean the necessary conditions for detection of space targets would rarely be met while the system is involved in traditional OTHR tasking. Further, the long wavelengths and large antenna beams mean the accuracy of any positioning information is low. The Australian Defence Force is investigating the development of a space surveillance system. While several dedicated facilities for space surveillance are in operation around the world, Australia\u27s Over-The-Horizon Radar (OTHR) network has some potential for this role. The OTHR operates in the HF band and is constrained by the propagation effects of the ionosphere. A spherically stratified ionospheric model and a model for a nominal OTHR antenna are developed that allow calculation of path propagation, power distribution, and clutter returns

Design Options For Low Cost, Low Power Microsatellite Based SAR.

This research aims at providing a system design that reduces the mass and cost of spaceborne Synthetic Aperture Radar (SAR) missions by a factor of two compared to current (TecSAR - 300 kg, ~ £ 127 M) or planned (NovaSAR-S — 400 kg, ~ £ 50 M) mission. This would enable the cost of a SAR constellation to approach that of the current optical constellation such as Disaster Monitoring Constellation (DMC). This research has identified that the mission cost can be reduced significantly by: focusing on a narrow range of applications (forestry and disasters monitoring); ensuring the final design has a compact stowage volume, which facilitates a shared launch; and building the payload around available platforms, rather than the platform around the payload. The central idea of the research has been to operate the SAR at a low instantaneous power level—a practical proposition for a micro-satellite based SAR. The use of a simple parabolic reflector with a single horn at L-band means that a single, reliable and efficient Solid State Power Amplifier (SSPA) can be used to lower the overall system cost, and to minimise the impact on the spacecraft power system. A detailed analysis of basic pulsed (~ 5 - 10 % duty cycle) and Continuous Wave (CW) SAR (100 % duty cycle) payloads has shown their inability to fit directly into existing microsatellite buses without involving major changes, or employing more than one platform. To circumvent the problems of pulsed and CW techniques, two approaches have been formulated. The first shows that a CW SAR can be implemented in a mono-static way with a single antenna on a single platform. In this technique, the SAR works in an Interrupted CW (ICW) mode, but these interruptions introduce periodic gaps in the raw data. On processing, these gapped data result in artefacts in the reconstructed images. By applying data based statistical estimation techniques to “fill in the gaps” in the simulated raw SAR data, this research has shown the possibility of minimising the effects of these artefacts. However, once the same techniques are applied to the real SAR data (in this case derived from RADARSAT-1), the artefacts are shown to be problematic. Because of this the ICW SAR design technique it is—set aside. The second shows that an extended chirp mode pulsed (ECMP) SAR (~ 20 - 54 % duty cycle) can be designed with a lowered peak power level which enables a single SSPA to feed a parabolic Cassegrain antenna. The detailed analysis shows the feasibility of developing a microsatellite based SAR design at a comparable price to those of optical missions

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Solid Earth science in the 1990s. Volume 3: Measurement techniques and technology

Reports are contained from the NASA Workshop on Solid Earth Science in the 1990s. The techniques and technologies needed to address the program objectives are discussed. The Measurement Technique and Technology Panel identified (1) candidate measurement systems for each of the measurements required for the Solid Earth Science Program that would fall under the NASA purview; (2) the capabilities and limitations of each technique; and (3) the developments necessary for each technique to meet the science panel requirements. In nearly all cases, current technology or a development path with existing technology was identified as capable of meeting the requirements of the science panels. These technologies and development paths are discussed

HIRIS (High-Resolution Imaging Spectrometer: Science opportunities for the 1990s. Earth observing system. Volume 2C: Instrument panel report

The high-resolution imaging spectrometer (HIRIS) is an Earth Observing System (EOS) sensor developed for high spatial and spectral resolution. It can acquire more information in the 0.4 to 2.5 micrometer spectral region than any other sensor yet envisioned. Its capability for critical sampling at high spatial resolution makes it an ideal complement to the MODIS (moderate-resolution imaging spectrometer) and HMMR (high-resolution multifrequency microwave radiometer), lower resolution sensors designed for repetitive coverage. With HIRIS it is possible to observe transient processes in a multistage remote sensing strategy for Earth observations on a global scale. The objectives, science requirements, and current sensor design of the HIRIS are discussed along with the synergism of the sensor with other EOS instruments and data handling and processing requirements

LASA (Lidar Atmospheric Sounder and Altimeter) Earth Observing System. Volume 2D: Instrument Panel Report

The Earth Observing System (Eos) will provide an ideal forum in which the stronly synergistic characteristics of the lidar systems can be used in concert with the characteristics of a number of other sensors to better understand the Earth as a system. Progress in the development of more efficient and long-lasting laser systems will insure their availability in the Eos time frame. The necessary remote-sensing techniques are being developed to convert the Lidar Atmospheric Sounder and Altimeter (LASA) observations into the proper scientific parameters. Each of these activities reinforces the promise that LASA and GLRS will be a reality in the Eos era

SAR (Synthetic Aperture Radar). Earth observing system. Volume 2F: Instrument panel report

The scientific and engineering requirements for the Earth Observing System (EOS) imaging radar are provided. The radar is based on Shuttle Imaging Radar-C (SIR-C), and would include three frequencies: 1.25 GHz, 5.3 GHz, and 9.6 GHz; selectable polarizations for both transmit and receive channels; and selectable incidence angles from 15 to 55 deg. There would be three main viewing modes: a local high-resolution mode with typically 25 m resolution and 50 km swath width; a regional mapping mode with 100 m resolution and up to 200 km swath width; and a global mapping mode with typically 500 m resolution and up to 700 km swath width. The last mode allows global coverage in three days. The EOS SAR will be the first orbital imaging radar to provide multifrequency, multipolarization, multiple incidence angle observations of the entire Earth. Combined with Canadian and Japanese satellites, continuous radar observation capability will be possible. Major applications in the areas of glaciology, hydrology, vegetation science, oceanography, geology, and data and information systems are described

TRMM (Tropical Rainfall Measuring Mission): A satellite mission to measure tropical rainfall

The Tropical Rainfall Measuring Mission (TRMM) is presented. TRMM is a satellite program being studied jointly by the United States and Japan which would carry out the systematic study of tropical rainfall required for major strides in weather and climate research. The scientific justification for TRMM is discussed. The implementation process for the scientific community, NASA management, and the other decision-makers and advisory personnel who are expected to evaluate the priority of the project is outlined

Aeronautical engineering: A continuing bibliography with indexes (supplement 284)

This bibliography lists 974 reports, articles, and other documents introduced into the NASA scientific and technical information system in Oct. 1992. The coverage includes documents on design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles