1,424 research outputs found
Massive MIMO for Wireless Sensing with a Coherent Multiple Access Channel
We consider the detection and estimation of a zero-mean Gaussian signal in a
wireless sensor network with a coherent multiple access channel, when the
fusion center (FC) is configured with a large number of antennas and the
wireless channels between the sensor nodes and FC experience Rayleigh fading.
For the detection problem, we study the Neyman-Pearson (NP) Detector and Energy
Detector (ED), and find optimal values for the sensor transmission gains. For
the NP detector which requires channel state information (CSI), we show that
detection performance remains asymptotically constant with the number of FC
antennas if the sensor transmit power decreases proportionally with the
increase in the number of antennas. Performance bounds show that the benefit of
multiple antennas at the FC disappears as the transmit power grows. The results
of the NP detector are also generalized to the linear minimum mean squared
error estimator. For the ED which does not require CSI, we derive optimal gains
that maximize the deflection coefficient of the detector, and we show that a
constant deflection can be asymptotically achieved if the sensor transmit power
scales as the inverse square root of the number of FC antennas. Unlike the NP
detector, for high sensor power the multi-antenna ED is observed to empirically
have significantly better performance than the single-antenna implementation. A
number of simulation results are included to validate the analysis.Comment: 32 pages, 6 figures, accepted by IEEE Transactions on Signal
Processing, Feb. 201
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Grant-Free Massive MTC-Enabled Massive MIMO: A Compressive Sensing Approach
A key challenge of massive MTC (mMTC), is the joint detection of device
activity and decoding of data. The sparse characteristics of mMTC makes
compressed sensing (CS) approaches a promising solution to the device detection
problem. However, utilizing CS-based approaches for device detection along with
channel estimation, and using the acquired estimates for coherent data
transmission is suboptimal, especially when the goal is to convey only a few
bits of data.
First, we focus on the coherent transmission and demonstrate that it is
possible to obtain more accurate channel state information by combining
conventional estimators with CS-based techniques. Moreover, we illustrate that
even simple power control techniques can enhance the device detection
performance in mMTC setups.
Second, we devise a new non-coherent transmission scheme for mMTC and
specifically for grant-free random access. We design an algorithm that jointly
detects device activity along with embedded information bits. The approach
leverages elements from the approximate message passing (AMP) algorithm, and
exploits the structured sparsity introduced by the non-coherent transmission
scheme. Our analysis reveals that the proposed approach has superior
performance compared to application of the original AMP approach.Comment: Submitted to IEEE Transactions on Communication
Hybrid Beamforming via the Kronecker Decomposition for the Millimeter-Wave Massive MIMO Systems
Despite its promising performance gain, the realization of mmWave massive
MIMO still faces several practical challenges. In particular, implementing
massive MIMO in the digital domain requires hundreds of RF chains matching the
number of antennas. Furthermore, designing these components to operate at the
mmWave frequencies is challenging and costly. These motivated the recent
development of hybrid-beamforming where MIMO processing is divided for separate
implementation in the analog and digital domains, called the analog and digital
beamforming, respectively. Analog beamforming using a phase array introduces
uni-modulus constraints on the beamforming coefficients, rendering the
conventional MIMO techniques unsuitable and call for new designs. In this
paper, we present a systematic design framework for hybrid beamforming for
multi-cell multiuser massive MIMO systems over mmWave channels characterized by
sparse propagation paths. The framework relies on the decomposition of analog
beamforming vectors and path observation vectors into Kronecker products of
factors being uni-modulus vectors. Exploiting properties of Kronecker mixed
products, different factors of the analog beamformer are designed for either
nulling interference paths or coherently combining data paths. Furthermore, a
channel estimation scheme is designed for enabling the proposed hybrid
beamforming. The scheme estimates the AoA of data and interference paths by
analog beam scanning and data-path gains by analog beam steering. The
performance of the channel estimation scheme is analyzed. In particular, the
AoA spectrum resulting from beam scanning, which displays the magnitude
distribution of paths over the AoA range, is derived in closed-form. It is
shown that the inter-cell interference level diminishes inversely with the
array size, the square root of pilot sequence length and the spatial separation
between paths.Comment: Submitted to IEEE JSAC Special Issue on Millimeter Wave
Communications for Future Mobile Networks, minor revisio
Sparse Signal Processing Concepts for Efficient 5G System Design
As it becomes increasingly apparent that 4G will not be able to meet the
emerging demands of future mobile communication systems, the question what
could make up a 5G system, what are the crucial challenges and what are the key
drivers is part of intensive, ongoing discussions. Partly due to the advent of
compressive sensing, methods that can optimally exploit sparsity in signals
have received tremendous attention in recent years. In this paper we will
describe a variety of scenarios in which signal sparsity arises naturally in 5G
wireless systems. Signal sparsity and the associated rich collection of tools
and algorithms will thus be a viable source for innovation in 5G wireless
system design. We will discribe applications of this sparse signal processing
paradigm in MIMO random access, cloud radio access networks, compressive
channel-source network coding, and embedded security. We will also emphasize
important open problem that may arise in 5G system design, for which sparsity
will potentially play a key role in their solution.Comment: 18 pages, 5 figures, accepted for publication in IEEE Acces
A Novel Uplink Data Transmission Scheme For Small Packets In Massive MIMO System
Intelligent terminals often produce a large number of data packets of small
lengths. For these packets, it is inefficient to follow the conventional medium
access control (MAC) protocols because they lead to poor utilization of service
resources. We propose a novel multiple access scheme that targets massive
multiple-input multiple-output (MIMO) systems based on compressive sensing
(CS). We employ block precoding in the time domain to enable the simultaneous
transmissions of many users, which could be even more than the number of
receive antennas at the base station. We develop a block-sparse system model
and adopt the block orthogonal matching pursuit (BOMP) algorithm to recover the
transmitted signals. Conditions for data recovery guarantees are identified and
numerical results demonstrate that our scheme is efficient for uplink small
packet transmission.Comment: IEEE/CIC ICCC 2014 Symposium on Signal Processing for Communication
- …