Self-Evaluation Applied Mathematics 2003-2008 University of Twente

This report contains the self-study for the research assessment of the Department of Applied Mathematics (AM) of the Faculty of Electrical Engineering, Mathematics and Computer Science (EEMCS) at the University of Twente (UT). The report provides the information for the Research Assessment Committee for Applied Mathematics, dealing with mathematical sciences at the three universities of technology in the Netherlands. It describes the state of affairs pertaining to the period 1 January 2003 to 31 December 2008

Smart FRP Composite Sandwich Bridge Decks in Cold Regions

INE/AUTC 12.0

Dynamical Analysis and Robust Control Synthesis for Water Treatment Processes

Nowadays, water demand and water scarcity are very urgent issues due to population growth, drought and poor water quality all over the world. Therefore, water treatment plants are playing a vital role for good living condition of human. Water area needs more concentration study to increase water productivity and decrease water cost. This dissertation presents the analysis and control of water treatment plants using robust control techniques. The applied control algorithms include H∞, gain scheduled and observer-based loop-shaping control technique. They are modern control algorithms and very powerful in robust controlling of systems with uncertainties and disturbances. The water treatment plants include a desalination system and a wastewater process. Since fresh water scarcity is getting more serious, the desalination plants are to produce drinking water and wastewater treatment plants give the reusable water. The desalination system is a RO one used to produce drinking water from seawater and brackish water. The nonlinear behaviors of this system is carefully analyzed before the linearization. Due to the uncertainty caused by concentration polarization, the system is linearized using linear state-space parametric uncertainty framework. The system also suffer from many disturbances which water hammer is one of the most influential one. The mixed robust H∞ and μ-synthesis control algorithm is applied to control the RO system coping with large uncertainties, disturbances and noises. The wastewater treatment process is an activated sludge process. This biological process use microorganisms to convert organic and certain inorganic matter from wastewater into cell mass. The process is very complex with many coupled biological and chemical reactions. Due to the large variation in the influent flow, the system is modelized and linearized as a linear parametric varying system using affine parameter-dependent representation. Since the influent flow is quickly variable and easily to be measured, the robust gain scheduled robust controller is applied to deal with the large uncertainty caused by the scheduled parameter. This control algorithm often gives better performances than those of general robust H∞ one. In the wastewater treatment plant, there exist an anaerobic digestion, which is controlled by the observer-based loop-shaping algorithm. The simulations show that all the controllers can effectively deal with large uncertainties, disturbances and noises in water treatment plants. They help improve the system performances and safeties, save energy and reduce product water costs. The studies contribute some potential control approaches for water treatment plants, which is currently a very active research area in the world.Contents ······················································································· iv List of Tables ··············································································· viii List of Figures ··············································································· ix Chapter 1. Introduction ···································································· 1 1.1 Reverse osmosis process ···································································· 2 1.2 Activated sludge process ···································································· 6 1.3 Robust H∞ and gain scheduling control ··················································· 10 Chapter 2. Robust H∞ controller ······················································· 13 2.1 Introduction ·················································································· 13 2.2 Uncertainty modelling ······································································ 13 2.2.1 Unstructured uncertainties ···························································· 14 2.2.2 Parametric uncertainties ······························································· 15 2.2.3 Structured uncertainties ································································ 16 2.2.4 Linear fractional transformation ······················································ 16 2.3 Stability criterion ············································································ 17 2.3.1 Small gain theorem ····································································· 17 2.3.2 Structured singular value (muy) synthesis brief definition ·························· 19 2.4 Robustness analysis and controller design ··············································· 20 2.4.1 Forming generalised plant and N-delta structure ····································· 20 2.4.2 Robustness analysis ···································································· 24 2.5 Reduced controller ·········································································· 26 2.5.1 Truncation ··············································································· 27 2.5.2 Residualization ········································································· 29 2.5.3 Balanced realization···································································· 29 2.5.4 Optimal Hankel norm approximation ················································ 31 Chapter 3. Robust gain scheduling controller ······································· 37 3.1 Introduction ·················································································· 37 3.2 Linear parameter varying (LPV) system ·················································· 39 3.3 Matrix Polytope ·············································································· 40 3.4 Polytope and affine parameter-dependent representation ······························· 41 3.4.1 Polytope representation ································································ 41 3.4.2 Affine parameter-dependent representation ········································· 42 3.5 Quadratic stability of LPV systems and quadratic (robust) H∞ performance ········· 43 3.6 Robust gain scheduling ····································································· 44 3.6.1 LPV system linearization ······························································ 44 3.6.2 Polytope-based gain scheduling ······················································ 45 3.6.3 LFT-based gain scheduling ··························································· 48 Chapter 4. Mixed robust H∞ and μ-synthesis controller applied for a reverse osmosis desalination system ····························································· 52 4.1 RO principles ················································································ 52 4.1.1 Osmosis and reverse osmosis ························································· 52 4.1.2 Dead-end filtration and cross-flow filtration ········································ 53 4.2 Membranes ··················································································· 54 4.2.1 Structure and material ································································· 54 4.2.2 Hollow fine fiber membrane module ················································ 55 4.2.3 Spiral wound membrane module ····················································· 57 4.3 Nonlinear RO modelling and analysis ···················································· 58 4.3.1 RO system introduction ······························································· 58 4.3.2 Modelling ··············································································· 60 4.3.3 Nonlinear analysis ······································································ 62 4.3.4 Concentration polarization ···························································· 64 4.4 Water hammer phenomenon ······························································· 66 4.4.1 Water hammer, column separation and vaporous cavitation ······················ 66 4.4.2 Water hammer analysis and simulation ·············································· 69 4.4.3 Prevention of water hammer effect··················································· 78 4.5 RO linearization ············································································· 79 4.5.1 Nominal linearization ·································································· 79 4.5.2 Uncertainty modeling ·································································· 81 4.5.3 Parametric uncertainty linearization ················································· 83 4.6 Robust H∞ controller design for RO system ·············································· 85 4.6.1 Control of uncertain RO system ······················································ 85 4.6.2 Robustness analysis and H∞ controller design ······································ 86 4.7 Simulation result and discussion··························································· 90 4.8 Conclusion ··················································································· 95 Chapter 5. Robust gain scheduling control of activated sludge process ······· 96 5.1 Introduction about activated sludge process ············································· 96 5.1.1 State variables ·········································································· 98 5.1.2 ASM1 processes ······································································ 100 5.1.3 The control problem of activated sludge process ································· 102 5.2 System modelling ········································································· 104 5.3 Model linearization ········································································ 107 5.4 Robust gain-schedule controller design for activated sludge process ··············· 109 5.5 Simulation result and discussion························································· 115 5.6 Conclusion ················································································· 120 Chapter 6. Observer-based loop-shaping control of anaerobic digestion ···· 121 6.1 Introduction ················································································ 121 6.1.1 Control problem in anaerobic digestion ··········································· 122 6.2 System modelling ········································································· 123 6.3 Controller design ·········································································· 124 6.3.1 H∞ loop-shaping controller ························································· 125 6.3.2 Coprime factor uncertainty ·························································· 126 6.3.3 Control synthesis ····································································· 127 6.4 Simulation result ··········································································· 131 6.5 Conclusion ················································································· 133 Chapter 7. Conclusion ··································································· 134 References ·················································································· 136 Appendices ················································································· 144Docto

Parallel particle swarm optimization algoritms in nuclear problems

Particle Swarm Optimization (PSO) is a population-based metaheuristic (PBM), in which solution candidates evolve through simulation of a simplified social adaptation model. Putting together robustness, efficiency and simplicity, PSO has gained great popularity. Many successful applications of PSO are reported, in which PSO demonstrated to have advantages over other well-established PBM. However, computational costs are still a great constraint for PSO, as well as for all other PBMs, especially in optimization problems with time consuming objective functions. To overcome such difficulty, parallel computation has been used. The default advantage of parallel PSO (PPSO) is the reduction of computational time. Master-slave approaches, exploring this characteristic are the most investigated. However, much more should be expected. It is known that PSO may be improved by more elaborated neighborhood topologies. Hence, in this work, we develop several different PPSO algorithms exploring the advantages of enhanced neighborhood topologies implemented by communication strategies in multiprocessor architectures. The proposed PPSOs have been applied to two complex and time consuming nuclear engineering problems: i) reactor core design (CD) and ii) fuel reload (FR) optimization. After exhaustive experiments, it has been concluded that: i) PPSO still improves solutions after many thousands of iterations, making prohibitive the efficient use of serial (non-parallel) PSO in such kind of realworld problems and ii) PPSO with more elaborated communication strategies demonstrated to be more efficient and robust than the master-slave model. Advantages and peculiarities of each model are carefully discussed in this work

Using numerical plant models and phenotypic correlation space to design achievable ideotypes

Numerical plant models can predict the outcome of plant traits modifications resulting from genetic variations, on plant performance, by simulating physiological processes and their interaction with the environment. Optimization methods complement those models to design ideotypes, i.e. ideal values of a set of plant traits resulting in optimal adaptation for given combinations of environment and management, mainly through the maximization of a performance criteria (e.g. yield, light interception). As use of simulation models gains momentum in plant breeding, numerical experiments must be carefully engineered to provide accurate and attainable results, rooting them in biological reality. Here, we propose a multi-objective optimization formulation that includes a metric of performance, returned by the numerical model, and a metric of feasibility, accounting for correlations between traits based on field observations. We applied this approach to two contrasting models: a process-based crop model of sunflower and a functional-structural plant model of apple trees. In both cases, the method successfully characterized key plant traits and identified a continuum of optimal solutions, ranging from the most feasible to the most efficient. The present study thus provides successful proof of concept for this enhanced modeling approach, which identified paths for desirable trait modification, including direction and intensity.Comment: 25 pages, 5 figures, 2017, Plant, Cell and Environmen

Lattice methods for strongly interacting many-body systems

Lattice field theory methods, usually associated with non-perturbative studies of quantum chromodynamics, are becoming increasingly common in the calculation of ground-state and thermal properties of strongly interacting non-relativistic few- and many-body systems, blurring the interfaces between condensed matter, atomic and low-energy nuclear physics. While some of these techniques have been in use in the area of condensed matter physics for a long time, others, such as hybrid Monte Carlo and improved effective actions, have only recently found their way across areas. With this topical review, we aim to provide a modest overview and a status update on a few notable recent developments. For the sake of brevity we focus on zero-temperature, non-relativistic problems. After a short introduction, we lay out some general considerations and proceed to discuss sampling algorithms, observables, and systematic effects. We show selected results on ground- and excited-state properties of fermions in the limit of unitarity. The appendix contains details on group theory on the lattice.Comment: 64 pages, 32 figures; topical review for J. Phys. G; replaced with published versio

Proceedings of the 2011 Joint Workshop of Fraunhofer IOSB and Institute for Anthropomatics, Vision and Fusion Laboratory

This book is a collection of 15 reviewed technical reports summarizing the presentations at the 2011 Joint Workshop of Fraunhofer IOSB and Institute for Anthropomatics, Vision and Fusion Laboratory. The covered topics include image processing, optical signal processing, visual inspection, pattern recognition and classification, human-machine interaction, world and situation modeling, autonomous system localization and mapping, information fusion, and trust propagation in sensor networks