New quasi-TEM waveguides using artificial surfaces and their application to antennas and circuits

Research interest: In recent years we have seen the emergence of commercial applications at high frequencies, such as the top part of the microwave band and the millimeter and sub-millimeter bands, and it is expected a big increase in the coming years. This growing demand requires a rapid development of low-cost technology with good performance at these frequencies, where common technologies, such as microstrip and standard waveguides, have some shortcomings. In particular, existing solutions for high-gain planar scanning antennas at these frequencies su er from the disadvantages of these technologies giving rise to high-cost products not suitable for high volume production. Objectives: The main objective of this thesis is to study the feasibility of a new proposal to improve existing solutions to date for low-cost high-gain planar scanning antennas at high frequencies. This overall objective has resulted in another central objective of this thesis, which is the research of new quasi-TEM waveguides that are more appropriate than current technologies for the realization of circuits and components at these frequency bands. These guided solutions make use of periodic or arti cial surfaces in order to con- ne and channel the elds within these waveguides. Methodology: The work follows a logical sequence of speci c tasks aimed at achieving the main objective of this thesis. Chapter 2 presents the proposed guiding solution and shows its performance numerical and experimentally. The optimized design of high-gain antennas based on waveguide slot arrays requires the development of e cient ad-hoc codes. The implementation and validation of this code is presented in Chapter 3, where a new method for the analysis of corrugated surfaces is proposed, and in Chapter 4, which extends this code to the analysis of waveguide slot arrays. The process design and optimization of a two-dimensional array is described in Chapter 5, where a preliminary experimental validation is also described. Moreover, the proposed guiding solution has inspired the development of a new guiding technology of wider bandwidth and more versatile for the realization of circuits and components at high frequencies. Chapter 6 presents the contributions to the study of this technology and its application to the design of circuits.Alfonso Alós, E. (2011). New quasi-TEM waveguides using artificial surfaces and their application to antennas and circuits [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/11073Palanci

Technologies for injection molded antennas for mass production

Tesi en modalitat de compendi de publicacions. In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of Universitat Politècnica de Catalunya's products or services. Internal or personal use of this material is permitted. If interested in reprinting/republishing IEEE copyrighted material for advertising or promotional purposes or for creating new collective works for resale or redistribution, please go to http://www.ieee.org/publications_standards/publications/rights/rights_link.html to learn how to obtain a License from RightsLink.(English) The deployment of 5G antenna infrastructure and the mandatory adoption of anti-collision radars for automotive cars will require large amount of antennas operating in the millimeter and sub-millimeter wavelength. These antennas are usually arrays and the possibility to manufacture the antenna array including the feeding network and the radiating element as a plastic piece reducing the need to use large (Printed Circuit Boards) PCB’s on expensive dielectric substrates, can be an interesting manufacturing technology. In this regard, waveguide-based antennas can be assembled using plastic technology with a proper metallization procedure. They are more scalable in terms of efficiency than microstrip line (ML) antennas and as the number of antennas in the array increases the gain is not reduced due to the losses in the substrate. In this thesis, the industrial challenges of this technology are addressed. A detailed tolerance study by including the plastic manufacturing errors, typically +-0.1mm, is carried out in order to check the feasibility of plastic antennas to address mass production. The antennas will need to be integrated with the radar chipsets, so a transition between the chip and the waveguide-antennas will be presented. These transitions can act as a direct chip-waveguide launcher, potentially reducing the need of using large substrates, hence reducing the cost of the antenna. Also, the need to apply metal coating is also explored to achieve the desired performance. Conventional techniques such as copper electrodeposition is used. The main drawback is that the copper has a lot of difficulties depositing into right angle surfaces. Eventually, these antennas will have to be integrated in the aesthetics of a car, usually behind a plastic radome (with its respective manufacturing errors as well) that will need to be designed and optimized properly in order to introduce the minimum distorsions to the radar. Optimization based on simulators done with commercial electromagnetic softwares like CST is not feasible due to the required large computation time. In this regard an ad-hoc ray-tracing based simulator has been developed to asses radome induced errors in radar performance. All these industrial problems are taken into account from the design stage where the time, price, fabrication tolerances and radiation requirements have to be compromised at the same time increasing dramatically the design complexity.(Español) El despliegue de infraestructura de antenas 5G y la adopción obligatoria de radares anticolisión para automóviles requerirá una gran cantidad de antenas que operen en longitudes de onda milimétricas y submilimétricas. Estas antenas suelen ser agrupaciones y la posibilidad de fabricar la agrupación de antenas, incluida la red de alimentación y el elemento radiante como una pieza de plástico, lo que reduce la necesidad de usar PCB grandes (placas de circuito impreso) en sustratos dieléctricos costosos, puede ser una tecnología de fabricación interesante. En este sentido, las antenas basadas en guía de ondas se pueden ensamblar utilizando tecnología plástica con un procedimiento de metalización adecuado. Son más escalables en términos de eficiencia que las antenas de línea microstrip (ML) y, a medida que aumenta el número de antenas en el arreglo, la ganancia no se reduce debido a las pérdidas en el sustrato. En esta tesis se abordan los retos industriales de esta tecnología. Se lleva a cabo un estudio de tolerancia detallado que incluye los errores de fabricación de plástico, normalmente +- 0,1 mm, para comprobar la viabilidad de las antenas de plástico para hacer frente a la producción en masa. Las antenas deberán integrarse junto con los chips de radar, por lo que se presentará una transición entre el chip y las antenas de guía de ondas. Estas transiciones pueden actuar como una transición directa de chip-guía, lo que podría reducir la necesidad de usar sustratos grandes y, por lo tanto, reducir el costo de la antena. Además, también se explora la necesidad de aplicar un recubrimiento metálico para lograr el rendimiento deseado. Se utilizan técnicas convencionales como la electrodeposición de cobre. El principal inconveniente es que el cobre tiene muchas dificultades para depositarse en superficies en ángulo recto. Eventualmente, estas antenas deberán integrarse en la estética de un automóvil, generalmente detrás de un radomo de plástico (con sus respectivos errores de fabricación también) que deberá diseñarse y optimizarse adecuadamente para introducir las mínimas distorsiones al radar. La optimización basada en simuladores realizados con software electromagnético comercial como CST no es factible debido al gran tiempo de cálculo requerido. En este sentido, se ha desarrollado un simulador basado en trazado de rayos ad-hoc para evaluar los errores inducidos por el radomo en el rendimiento del radar. Todos estos problemas industriales se tienen en cuenta desde la etapa de diseño donde el tiempo, el precio, las tolerancias de fabricación y los requisitos de radiación tienen que verse comprometidos al mismo tiempo que aumentan drásticamente la complejidad del diseño.Postprint (published version

Design of Tunable Beamforming Networks Using Metallic Ridge Gap Waveguide Technology

Wireless communication is a leap of development in the history of humanity. For the past 100 years, a considerable effort has been spent to develop better standards, and technologies for a higher speed wireless communication with high system capacity for different applications. This requires the design of a high-frequency, point-to-multipoint antenna array system to achieve the mentioned goals. In addition, the reconfigurability of this antenna system is essential to change the system characteristics to achieve acceptable performance in different situations. The main goal of this thesis is to design a reconfigurable beamforming network to work on the Ka-band for waveguide applications. Among different beamforming networks in the literature, the Butler matrix is chosen due to its higher efficiency and the smaller number of components required than other beamforming networks. The Butler matrix is designed using a dual-plane topology to avoid using crossovers. Ridge gap waveguide technology is chosen among different transmission lines to implement the Butler matrix for several reasons: It does not need dielectrics to operate, so its power handling capacity is defined by the gap height, and it has no dielectric losses. Its zero-field region represents the operating principle for some tunable devices introduced here and its contactless nature, which eases the assembly of waveguide parts at the millimeter-wave frequencies. The reconfigurability of the Butler matrix is implemented such that beamwidth, maximum gain, and beam direction may be all tuned for optimum system performance. To that end, several components are designed to achieve the required target, and strict requirements are placed on several components to achieve an acceptable cascaded-system performance. These components include a ridge gap waveguide 90o-hybrid working over a more than 30% bandwidth, which can provide several coupling levels ranging from 3 dB to 33 dB and a return loss and isolation better than 30 dB. Another component is a wideband reconfigurable power splitter that has a 40% bandwidth, a return loss better than 20 dB in the worst case and the ability to achieve all power splitting ratios including switching between the two guides. In addition, a wideband reconfigurable phase shifter is designed to have 33% bandwidth and phase shift tuning range from 0o to 200o. Two coaxial-to-ridge gap waveguide transitions are designed to work over a more than 100% bandwidth to facilitate testing different ridge gap waveguide components. Analysis of the asymmetric double ridge waveguide is introduced where its impedance is deduced and may be used to design a single to double ridge waveguide transition useful for the dual-plane Butler matrix introduced here. In addition, this concept is used to develop a wideband unequal power divider in the single ridge waveguide technology. At the end, the whole system is assembled to show its performance in different tuning states. The ability of the system to produce radiation patterns of different characteristics is demonstrated. The presented Butler matrix design is a promising beamforming network for several applications like radar, base stations for mobile communications, and satellite applications

A Review: Substrate Integrated Waveguide Antennas and Arrays

This study aims to provide an overview and deployment of Substrate-Integrated Waveguide (SIW) based antenna and arrays, with different configurations, feeding mechanisms, and performances. Their performance improvement methods, including bandwidth enhancement, size reduction, and gain improvement are also discussed based on available literature. SIW technology, which acts as a bridge between planar and non-planar technology, is a very favorable candidate for the development of components operating at microwave and millimeter wave band. Due to this, SIW antennas and array take the advantages of both classical metallic waveguide, which includes high gain, high power capacity, low cross polarization, and high selectivity, and that of planar antennas which comprises low profile, light weight, low fabrication cost, conformability to planar or bent surfaces, and easy integration with planar circuits

Development of micromachined millimeter-wave modules for next-generation wireless transceiver front-ends

This thesis discusses the design, fabrication, integration and characterization of millimeter wave passive components using polymer-core-conductor surface micromachining technologies. Several antennas, including a W-band broadband micromachined monopole antenna on a lossy glass substrate, and a Ka-band elevated patch antenna, and a V-band micromachined horn antenna, are presented. All antennas have advantages such as a broad operation band and high efficiency. A low-loss broadband coupler and a high-Q cavity for millimeter-wave applications, using surface micromachining technologies is reported using the same technology. Several low-loss all-pole band-pass filters and transmission-zero filters are developed, respectively. Superior simulation and measurement results show that polymer-core-conductor surface micromachining is a powerful technology for the integration of high-performance cavity, coupler and filters. Integration of high performance millimeter-wave transceiver front-end is also presented for the first time. By elevating a cavity-filter-based duplexer and a horn antenna on top of the substrate and using air as the filler, the dielectric loss can be eliminated. A full-duplex transceiver front-end integrated with amplifiers are designed, fabricated, and comprehensively characterized to demonstrate advantages brought by this surface micromachining technology. It is a low loss and substrate-independent solution for millimeter-wave transceiver integration.Ph.D.Committee Chair: John Papapolymerou; Committee Chair: Manos Tentzeris; Committee Member: Gordon Stuber; Committee Member: John Cressler; Committee Member: John Z. Zhang; Committee Member: Joy Laska

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

New Integrated Waveguides Concept and Development of Substrate Integrated Antennas with Controlled Boundary Conditions

The unprecedented development of substrate integrated circuits (SICs) has made a widespread necessity for further studies and development of waveguides and antennas based on this technology. As the operating frequency is on the rise, the conventional designs of the substrate integrated components are becoming more problematic and costly. Therefore, some techniques are proposed to improve the performance of the waveguides and antennas based on the concept of substrate integrated technology. First, the problems of the recently developed ridge gap waveguide (RGW) are resolved by introducing a new configuration of this technology which has considerable advantages over the original version of the RGW regarding its construction technology, propagation mode, characteristic impedance, and insertion loss. Second, the configuration of substrate integrated waveguide (SIW), which has been widely accepted for planar and integrated microwave circuits, is modified to operate with low insertion loss at high frequencies without bearing the anisotropic nature of the dielectric material. The substrate integrated antennas have a strong potential to be used in the compact wireless devices as they can be easily integrated with the baseband circuits. In the horn family, the H-plane horn antenna that can be implemented in the integrated form has received considerable attention in recent years. However, numerous problems are associated with this antenna such as limited bandwidth, tapered aperture distribution, high back radiation, and E-plane asymmetry. Several new techniques are introduced to improve the performance of this antenna, especially at millimeter wave frequencies

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium