Design Principles for Closed Loop Supply Chains

In this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the literature. It appears that setting up closed loop supply chains requires some additional design principles because of sustainability requirements. At the same time however, we see that traditional principles also apply. Subsequently we look at a business situation at Honeywell. Here, only a subset of the relevant design principles is applied. The apparent low status of reverse logistics may provide an explanation for this. To some extent, the same mistakes are made again as were 20 years ago in, for instance, inbound logistics. Thus, obvious improvements can be made by applying traditional principles. Also new principles, which require a life cycle driven approach, need to be applied. This can be supported by advanced management tools such as LCA and LCC.reverse logistics;case-study;closed loop supply chains

Robust Multi-Objective Sustainable Reverse Supply Chain Planning: An Application in the Steel Industry

In the design of the supply chain, the use of the returned products and their recycling in the production and consumption network is called reverse logistics. The proposed model aims to optimize the flow of materials in the supply chain network (SCN), and determine the amount and location of facilities and the planning of transportation in conditions of demand uncertainty. Thus, maximizing the total profit of operation, minimizing adverse environmental effects, and maximizing customer and supplier service levels have been considered as the main objectives. Accordingly, finding symmetry (balance) among the profit of operation, the environmental effects and customer and supplier service levels is considered in this research. To deal with the uncertainty of the model, scenario-based robust planning is employed alongside a meta-heuristic algorithm (NSGA-II) to solve the model with actual data from a case study of the steel industry in Iran. The results obtained from the model, solving and validating, compared with actual data indicated that the model could optimize the objectives seamlessly and determine the amount and location of the necessary facilities for the steel industry more appropriately.This article belongs to the Special Issue Uncertain Multi-Criteria Optimization Problem

Overview and classification of coordination contracts within forward and reverse supply chains

Among coordination mechanisms, contracts are valuable tools used in both theory and practice to coordinate various supply chains. The focus of this paper is to present an overview of contracts and a classification of coordination contracts and contracting literature in the form of classification schemes. The two criteria used for contract classification, as resulted from contracting literature, are transfer payment contractual incentives and inventory risk sharing. The overview classification of the existing literature has as criteria the level of detail used in designing the coordination models with applicability on the forward and reverse supply chains.Coordination contracts; forward supply chain; reverse supply chain

Design of Closed Loop Supply Chains

Increased concern for the environment has lead to new techniques to design products and supply chains that are both economically and ecologically feasible. This paper deals with the product - and corresponding supply chain design for a refrigerator. Literature study shows that there are many models to support product design and logistics separately, but not in an integrated way. In our research we develop quantitative modelling to support an optimal design structure of a product, i.e. modularity, repairability, recyclability, as well as the optimal locations and goods flows allocation in the logistics system. Environmental impacts are measured by energy and waste. Economic costs are modelled as linear functions of volumes with a fixed set-up component for facilities. We apply this model using real life R&D data of a Japanese consumer electronics company. The model is run for different scenarios using different parameter settings such as centralised versus decentralised logistics, alternative product designs, varying return quality and quantity, and potential environmental legislation based on producer responsibility.supply chain management;reverse logistics;facility location;network design;product design

End-of-life vehicle (ELV) recycling management: improving performance using an ISM approach

With booming of the automobile industry, China has become the country with increasing car ownership all over the world. However, the end-of-life vehicle (ELV) recycling industry is at infancy, and there is little systematic review on ELV recycling management, as well as low adoption amongst domestic automobile industry. This study presents a literature review and an interpretive structural modeling (ISM) approach is employed to identify the drivers towards Chinese ELV recycling business from government, recycling organizations and consumer’s perspectives, so as to improve the sustainability of automobile supply chain by providing some strategic insights. The results derived from the ISM analysis manifest that regulations on auto-factory, disassembly technique, and value mining of recycling business are the essential ingredients. It is most effective and efficient to promote ELV recycling business by improving these attributes, also the driving and dependence power analysis are deemed to provide guidance on performance improvement of ELV recycling in the Chinese market

Decision Support System for Managing Reverse Supply Chain

Reverse logistics are becoming more and more important in the overall Industry area because of the environment and business factors. Planning and implementing a suitable reverse logistics network could bring more profit, customer satisfaction, and an excellent social picture for companies. But, most of the logistics networks are not equipped to handle the return products in reverse channels. Reverse logistics processes and plans rely heavily on reversing the supply chain so that companies can correctly identify and categorize returned products for disposition, an area that offers many opportunities for additional revenue. The science of reverse logistics includes return policy administration, product recall protocols, repairs processing, product repackaging, parts management, recycling, product disposition management, maximizing liquidation values and much more. The focus of this project is to develop a reverse logistics management system/ tools (RLMS). The proposed tools are demonstrated in the following order. First, we identify the risks involved in the reverse supply chain. Survey tool is used to collect data and information required for analysis. The methodologies that are used to identify key risks are the six sigma tools, namely Define, Measure, Analyse, Improve and Control (DMAIC), SWOT analysis, cause and effect, and Risk Mapping. An improved decision-making method using fuzzy set theory for converting linguistic data into numeric risk ratings has been attempted. In this study, the concept of ‘Left and Right dominance approach’(Chen and Liu, 2001) and Method of ‘In center of centroids’ (Thoran et al., 2012a,b) for generalized trapezoidal fuzzy numbers has been used to quantify the ‘degree of risk’ in terms of crisp ratings. After the analysis, the key risks are identified are categorized, and an action requirement plan suggested for providing guidelines for the managers to manage the risk successfully in the context of reverse logistics. Next, from risk assessment findings, information technology risk presents the highest risk impact on the performance of the reverse logistics, especially lack of use of a decision support system (DSS). We propose a novel multi-attribute decision (MADM) support tool that can categorizes return products and make the best alternative selection of recovery and disposal option using carefully considered criteria using MADM decision making methodologies such as fuzzy MOORA and VIKOR. The project can be applied to all types of industries. Once the returned products are collected and categorized at the retailers/ Points of return (PoR), an optimized network is required to determine the number of reprocessing centres to be opened and the optimized optimum material flow between retailers, reprocessing, recycling and disposal centers at minimum costs. The research develops a mixed integer linear programming model for two scenarios, namely considering direct shipping from retailer/ PoR to the respective reprocessing centers and considering the use of centralized return centers (CRC). The models are solved using LINGO 15 software and excel solver tools respectively. The advantage of the implementation of our solution is that it will help improve performance and reduce time. This benefits the company by having a reduction in their cost due to uncertainties and also contributes to better customer satisfaction. Implementation of these tools at ABZ computer distributing company demonstrates how the reverse logistics management tools can used in order to be beneficial to the organization. The tool is designed to be easily implemented at minimal cost and serves as a valuable tool for personnel faced with significant and costly decisions regarding risk assessment, decision making and network optimization in the reverse supply chain practices

Partner selection for reverse logistics centres in green supply chains: a fuzzy artificial immune optimisation approach

The design of reverse logistics networks has now emerged as a major issue for manufacturers, not only in developed countries where legislation and societal pressures are strong, but also in developing countries where the adoption of reverse logistics practices may offer a competitive advantage. This paper presents a new model for partner selection for reverse logistic centres in green supply chains. The model offers three advantages. Firstly, it enables economic, environment, and social factors to be considered simultaneously. Secondly, by integrating fuzzy set theory and artificial immune optimization technology, it enables both quantitative and qualitative criteria to be considered simultaneously throughout the whole decision-making process. Thirdly, it extends the flat criteria structure for partner selection evaluation for reverse logistics centres to the more suitable hierarchy structure. The applicability of the model is demonstrated by means of an empirical application based on data from a Chinese electronic equipment and instruments manufacturing company

Periodic Review, Push Inventory Policies for Remanufacturing

Sustainability has become a major issue in most economies, causing many leading companies to focus on product recovery and reverse logistics. This research is focused on product recovery, and in particular on production control and inventory management in the remanufacturing context. We study a remanufacturing facility that receives a stream of returned products according to a Poisson process. Demand is uncertain and also follows a Poisson process. The decision problems for the remanufacturing facility are when to release returned products to the remanufacturing line and how many new products to manufacture. We assume that remanufactured products are as good as new. In this paper, we employ a "push" policy that combines these two decisions. It is well known that the optimal policy parameters are difficult to find analytically; therefore, we develop several heuristics based on traditional inventory models. We also investigate the performance of the system as a function of return rates, backorder costs and manufacturing and remanufacturing lead times; and we develop approximate lower and upper bounds on the optimal solution. We illustrate and explain some counter-intuitive results and we test the performance of the heuristics on a set of sample problems. We find that the average error of the heuristics is quite low.inventory;reverse logistics;remanufacturing;environment;heuristics

One and Two Way Packaging in the Dairy Sector

Choosing packaging material for dairy products and soft drinks is an interesting issue at the moment. Discussions arise on the costs impacts and environmental impacts of both one way packaging and reusable packaging. The aim of this article is to develop an evaluation tool providing costs and environmental impacts of the PC-bottle and the GT-packs in the dairy sector, considering forward and return flows. The evaluation tool enables the user to analyse the costs and environmental impacts of a supply chain with and without return flows using scenario analyses with respect to the use of various carrier types and the number of return loops. It appears that costs differences between PC-bottles and GT-pack are quite small. The PC bottle has a better environmental profile than the GT-pack. Scenario analysis on the carriers results in the advice to use preferably roll-in-containers with direct delivery, secondly roll-in-containers with delivery via distribution centers, thirdly in case of direct delivery either cartons or crates and cartons in case of delivery via distribution centers.pricing;supply chain management;reverse logistics;environment;life cycle assessment