209 research outputs found
Doctor of Philosophy
dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy
Circuit design and analysis for on-FPGA communication systems
On-chip communication system has emerged as a prominently important subject in Very-Large-
Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects.
Interconnects often dictates the system performance, and, therefore, research for new
methodologies and system architectures that deliver high-performance communication services
across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable
Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication.
Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable
fabrics, switches and the specific routing architecture also introduce additional latency
and bandwidth degradation further hindering intra-chip communication performance.
Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs.
Communication with programmable interconnect received little attention and is inadequately understood.
This thesis is among the first to research on-chip communication systems that are built on
top of programmable fabrics and proposes methodologies to maximize the interconnect throughput
performance. There are three major contributions in this thesis: (i) an analysis of on-chip
interconnect fringing, which degrades the bandwidth of communication channels due to routing
congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly
improves the interconnect throughput by exploiting the fundamental electrical characteristics
of the reconfigurable interconnect structures. This new scheme can potentially mitigate
the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide
adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime
optimization for route planning and dynamic routing which, effectively utilizes the in-silicon
bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new
methodologies and concepts are proposed to enhance the on-FPGA communication throughput
performance that is of vital importance in new technology processes
Doctor of Philosophy
dissertationCommunication surpasses computation as the power and performance bottleneck in forthcoming exascale processors. Scaling has made transistors cheap, but on-chip wires have grown more expensive, both in terms of latency as well as energy. Therefore, the need for low energy, high performance interconnects is highly pronounced, especially for long distance communication. In this work, we examine two aspects of the global signaling problem. The first part of the thesis focuses on a high bandwidth asynchronous signaling protocol for long distance communication. Asynchrony among intellectual property (IP) cores on a chip has become necessary in a System on Chip (SoC) environment. Traditional asynchronous handshaking protocol suffers from loss of throughput due to the added latency of sending the acknowledge signal back to the sender. We demonstrate a method that supports end-to-end communication across links with arbitrarily large latency, without limiting the bandwidth, so long as line variation can be reliably controlled. We also evaluate the energy and latency improvements as a result of the design choices made available by this protocol. The use of transmission lines as a physical interconnect medium shows promise for deep submicron technologies. In our evaluations, we notice a lower energy footprint, as well as vastly reduced wire latency for transmission line interconnects. We approach this problem from two sides. Using field solvers, we investigate the physical design choices to determine the optimal way to implement these lines for a given back-end-of-line (BEOL) stack. We also approach the problem from a system designer's viewpoint, looking at ways to optimize the lines for different performance targets. This work analyzes the advantages and pitfalls of implementing asynchronous channel protocols for communication over long distances. Finally, the innovations resulting from this work are applied to a network-on-chip design example and the resulting power-performance benefits are reported
Master of Science
thesisThis thesis designs, implements, and evaluates modular Open Core Protocol (OCP) interfaces for Intellectual Property (IP) cores and Network-on-Chip (NoC) that re- duces System-On-Chip (SoC) design time and enables research on di erent architectural sequencing control methods. To utilize the NoCs design time optimization feature at the boundaries, a standardized industry socket was required, which can address the SoC shorter time-to-market requirements, design issues, and also the subsequent reuse of developed IP cores. OCP is an open industry standard socket interface speci cation used in this research to enable the IP cores reusability across multiple SoC designs. This research work designs and implements clocked OCP interfaces between IP cores and On-Chip Network Fabric (NoC), in single- and multi- frequency clocked domains. The NoC interfaces between IP cores and on-chip network fabric are implemented using the standard network interface structure. It consists of back-end and front-end submodules corresponding to customized interfaces to IP cores or network fabric and OCP Master and Slave entities, respectively. A generic domain interface (DI) protocol is designed which acts as the bridge between back-end and front-end submodules for synchronization and data ow control. Clocked OCP interfaces are synthesized, placed and routed using IBM's 65nm process technology. The implemented designs are veri ed for OCP compliance using SOLV (Sonics OCP Library for Veri cation). Finally, this thesis reports the performance metrics such as design target frequency of operation, latency, area, energy per transaction, and maximum bandwidth across network on-chip for single- and multifrequency clocked designs
Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip
The sustained demand for faster, more powerful chips has been met by the
availability of chip manufacturing processes allowing for the integration of increasing
numbers of computation units onto a single die. The resulting outcome,
especially in the embedded domain, has often been called SYSTEM-ON-CHIP
(SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC).
MPSoC design brings to the foreground a large number of challenges, one of
the most prominent of which is the design of the chip interconnection. With a
number of on-chip blocks presently ranging in the tens, and quickly approaching
the hundreds, the novel issue of how to best provide on-chip communication
resources is clearly felt.
NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable
answer to this design concern. By bringing large-scale networking concepts to
the on-chip domain, they guarantee a structured answer to present and future
communication requirements. The point-to-point connection and packet switching
paradigms they involve are also of great help in minimizing wiring overhead
and physical routing issues. However, as with any technology of recent inception,
NoC design is still an evolving discipline. Several main areas of interest
require deep investigation for NoCs to become viable solutions:
• The design of the NoC architecture needs to strike the best tradeoff among
performance, features and the tight area and power constraints of the onchip
domain.
• Simulation and verification infrastructure must be put in place to explore,
validate and optimize the NoC performance.
• NoCs offer a huge design space, thanks to their extreme customizability in
terms of topology and architectural parameters. Design tools are needed
to prune this space and pick the best solutions.
• Even more so given their global, distributed nature, it is essential to evaluate
the physical implementation of NoCs to evaluate their suitability for
next-generation designs and their area and power costs.
This dissertation performs a design space exploration of network-on-chip architectures,
in order to point-out the trade-offs associated with the design of
each individual network building blocks and with the design of network topology
overall. The design space exploration is preceded by a comparative analysis
of state-of-the-art interconnect fabrics with themselves and with early networkon-
chip prototypes. The ultimate objective is to point out the key advantages
that NoC realizations provide with respect to state-of-the-art communication
infrastructures and to point out the challenges that lie ahead in order to make
this new interconnect technology come true. Among these latter, technologyrelated
challenges are emerging that call for dedicated design techniques at all
levels of the design hierarchy. In particular, leakage power dissipation, containment
of process variations and of their effects. The achievement of the above
objectives was enabled by means of a NoC simulation environment for cycleaccurate
modelling and simulation and by means of a back-end facility for the
study of NoC physical implementation effects. Overall, all the results provided
by this work have been validated on actual silicon layout
Master of Science
thesisIntegrated circuits often consist of multiple processing elements that are regularly tiled across the two-dimensional surface of a die. This work presents the design and integration of high speed relative timed routers for asynchronous network-on-chip. It researches NoC's efficiency through simplicity by directly translating simple T-router, source-routing, single-flit packet to higher radix routers. This work is intended to study performance and power trade-offs adding higher radix routers, 3D topologies, Virtual Channels, Accurate NoC modeling, and Transmission line communication links. Routers with and without virtual channels are designed and integrated to arrayed communication networks. Furthermore, the work investigates 3D networks with diffusive RC wires and transmission lines on long wrap interconnects
Recommended from our members
Design and performance optimization of asynchronous networks-on-chip
As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems.
In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style.
The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions.
First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains.
Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow.
Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel.
In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement
Methodologies and Toolflows for the Predictable Design of Reliable and Low-Power NoCs
There is today the unmistakable need to evolve design methodologies and
tool
ows for Network-on-Chip based embedded systems. In particular, the
quest for low-power requirements is nowadays a more-than-ever urgent dilemma.
Modern circuits feature billion of transistors, and neither power management
techniques nor batteries capacity are able to endure the increasingly higher
integration capability of digital devices. Besides, power concerns come together
with modern nanoscale silicon technology design issues.
On one hand, system failure rates are expected to increase exponentially at
every technology node when integrated circuit wear-out failure mechanisms
are not compensated for. However, error detection and/or correction mechanisms
have a non-negligible impact on the network power.
On the other hand, to meet the stringent time-to-market deadlines, the design
cycle of such a distributed and heterogeneous architecture must not be
prolonged by unnecessary design iterations.
Overall, there is a clear need to better discriminate reliability strategies and
interconnect topology solutions upfront, by ranking designs based on power
metric. In this thesis, we tackle this challenge by proposing power-aware
design technologies.
Finally, we take into account the most aggressive and disruptive methodology
for embedded systems with ultra-low power constraints, by migrating
NoC basic building blocks to asynchronous (or clockless) design style. We
deal with this challenge delivering a standard cell design methodology and
mainstream CAD tool
ows, in this way partially relaxing the requirement
of using asynchronous blocks only as hard macros
- …