461 research outputs found
Limited Feedback-based Block Diagonalization for the MIMO Broadcast Channel
Block diagonalization is a linear precoding technique for the multiple
antenna broadcast (downlink) channel that involves transmission of multiple
data streams to each receiver such that no multi-user interference is
experienced at any of the receivers. This low-complexity scheme operates only a
few dB away from capacity but requires very accurate channel knowledge at the
transmitter. We consider a limited feedback system where each receiver knows
its channel perfectly, but the transmitter is only provided with a finite
number of channel feedback bits from each receiver. Using a random quantization
argument, we quantify the throughput loss due to imperfect channel knowledge as
a function of the feedback level. The quality of channel knowledge must improve
proportional to the SNR in order to prevent interference-limitations, and we
show that scaling the number of feedback bits linearly with the system SNR is
sufficient to maintain a bounded rate loss. Finally, we compare our
quantization strategy to an analog feedback scheme and show the superiority of
quantized feedback.Comment: 20 pages, 4 figures, submitted to IEEE JSAC November 200
Antenna Combining for the MIMO Downlink Channel
A multiple antenna downlink channel where limited channel feedback is
available to the transmitter is considered. In a vector downlink channel
(single antenna at each receiver), the transmit antenna array can be used to
transmit separate data streams to multiple receivers only if the transmitter
has very accurate channel knowledge, i.e., if there is high-rate channel
feedback from each receiver. In this work it is shown that channel feedback
requirements can be significantly reduced if each receiver has a small number
of antennas and appropriately combines its antenna outputs. A combining method
that minimizes channel quantization error at each receiver, and thereby
minimizes multi-user interference, is proposed and analyzed. This technique is
shown to outperform traditional techniques such as maximum-ratio combining
because minimization of interference power is more critical than maximization
of signal power in the multiple antenna downlink. Analysis is provided to
quantify the feedback savings, and the technique is seen to work well with user
selection and is also robust to receiver estimation error.Comment: Submitted to IEEE Trans. Wireless Communications April 2007. Revised
August 200
Receive Combining vs. Multi-Stream Multiplexing in Downlink Systems with Multi-Antenna Users
In downlink multi-antenna systems with many users, the multiplexing gain is
strictly limited by the number of transmit antennas and the use of these
antennas. Assuming that the total number of receive antennas at the
multi-antenna users is much larger than , the maximal multiplexing gain can
be achieved with many different transmission/reception strategies. For example,
the excess number of receive antennas can be utilized to schedule users with
effective channels that are near-orthogonal, for multi-stream multiplexing to
users with well-conditioned channels, and/or to enable interference-aware
receive combining. In this paper, we try to answer the question if the data
streams should be divided among few users (many streams per user) or many users
(few streams per user, enabling receive combining). Analytic results are
derived to show how user selection, spatial correlation, heterogeneous user
conditions, and imperfect channel acquisition (quantization or estimation
errors) affect the performance when sending the maximal number of streams or
one stream per scheduled user---the two extremes in data stream allocation.
While contradicting observations on this topic have been reported in prior
works, we show that selecting many users and allocating one stream per user
(i.e., exploiting receive combining) is the best candidate under realistic
conditions. This is explained by the provably stronger resilience towards
spatial correlation and the larger benefit from multi-user diversity. This
fundamental result has positive implications for the design of downlink systems
as it reduces the hardware requirements at the user devices and simplifies the
throughput optimization.Comment: Published in IEEE Transactions on Signal Processing, 16 pages, 11
figures. The results can be reproduced using the following Matlab code:
https://github.com/emilbjornson/one-or-multiple-stream
Compressive Sensing for Feedback Reduction in MIMO Broadcast Channels
We propose a generalized feedback model and compressive sensing based
opportunistic feedback schemes for feedback resource reduction in MIMO
Broadcast Channels under the assumption that both uplink and downlink channels
undergo block Rayleigh fading. Feedback resources are shared and are
opportunistically accessed by users who are strong, i.e. users whose channel
quality information is above a certain fixed threshold. Strong users send same
feedback information on all shared channels. They are identified by the base
station via compressive sensing. Both analog and digital feedbacks are
considered. The proposed analog & digital opportunistic feedback schemes are
shown to achieve the same sum-rate throughput as that achieved by dedicated
feedback schemes, but with feedback channels growing only logarithmically with
number of users. Moreover, there is also a reduction in the feedback load. In
the analog feedback case, we show that the propose scheme reduces the feedback
noise which eventually results in better throughput, whereas in the digital
feedback case the proposed scheme in a noisy scenario achieves almost the
throughput obtained in a noiseless dedicated feedback scenario. We also show
that for a fixed given budget of feedback bits, there exist a trade-off between
the number of shared channels and thresholds accuracy of the feedback SINR.Comment: Submitted to IEEE Transactions on Wireless Communications, April 200
- …