Latency-aware cost optimization of the service infrastructure placement in 5G networks

Under 5G use case scenarios latency is a main challenge that must be addressed, since mission critical environments are mostly delay sensitive. To achieve this goal, the service infrastructure placement optimization is needed in the interest of minimizing the delays in the service access layer. To solve this problem, this paper mathematically models the placement problem in a Fog Computing/NFV environment as a Mixed-Integer Linear Programming problem and proposes a heuristic-based solution considering 5G mobile network requirements. As a practical result, an application was developed to achieve usability and flexibility while ensuring operational applicability of the proposed methods.Postprint (published version

A framework for the joint placement of edge service infrastructure and User Plane Functions for 5G

Achieving less than 1 ms end-to-end communication latency, required for certain 5G services and use cases, is imposing severe technical challenges for the deployment of next-generation networks. To achieve such an ambitious goal, the service infrastructure and User Plane Function (UPF) placement at the network edge, is mandatory. However, this solution implies a substantial increase in deployment and operational costs. To cost-effectively solve this joint placement problem, this paper introduces a framework to jointly address the placement of edge nodes (ENs) and UPFs. Our framework proposal relies on Integer Linear Programming (ILP) and heuristic solutions. The main objective is to determine the ENs and UPFs’ optimal number and locations to minimize overall costs while satisfying the service requirements. To this aim, several parameters and factors are considered, such as capacity, latency, costs and site restrictions. The proposed solutions are evaluated based on different metrics and the obtained results showcase over 20% cost savings for the service infrastructure deployment. Moreover, the gap between the UPF placement heuristic and the optimal solution is equal to only one UPF in the worst cases, and a computation time reduction of over 35% is achieved in all the use cases studied.Postprint (author's final draft

Edge computing infrastructure for 5G networks: a placement optimization solution

This thesis focuses on how to optimize the placement of the Edge Computing infrastructure for upcoming 5G networks. To this aim, the core contributions of this research are twofold: 1) a novel heuristic called Hybrid Simulated Annealing to tackle the NP-hard nature of the problem and, 2) a framework called EdgeON providing a practical tool for real-life deployment optimization. In more detail, Edge Computing has grown into a key solution to 5G latency, reliability and scalability requirements. By bringing computing, storage and networking resources to the edge of the network, delay-sensitive applications, location-aware systems and upcoming real-time services leverage the benefits of a reduced physical and logical path between the end-user and the data or service host. Nevertheless, the edge node placement problem raises critical concerns regarding deployment and operational expenditures (i.e., mainly due to the number of nodes to be deployed), current backhaul network capabilities and non-technical placement limitations. Common approaches to the placement of edge nodes are based on: Mobile Edge Computing (MEC), where the processing capabilities are deployed at the Radio Access Network nodes and Facility Location Problem variations, where a simplistic cost function is used to determine where to optimally place the infrastructure. However, these methods typically lack the flexibility to be used for edge node placement under the strict technical requirements identified for 5G networks. They fail to place resources at the network edge for 5G ultra-dense networking environments in a network-aware manner. This doctoral thesis focuses on rigorously defining the Edge Node Placement Problem (ENPP) for 5G use cases and proposes a novel framework called EdgeON aiming at reducing the overall expenses when deploying and operating an Edge Computing network, taking into account the usage and characteristics of the in-place backhaul network and the strict requirements of a 5G-EC ecosystem. The developed framework implements several placement and optimization strategies thoroughly assessing its suitability to solve the network-aware ENPP. The core of the framework is an in-house developed heuristic called Hybrid Simulated Annealing (HSA), seeking to address the high complexity of the ENPP while avoiding the non-convergent behavior of other traditional heuristics (i.e., when applied to similar problems). The findings of this work validate our approach to solve the network-aware ENPP, the effectiveness of the heuristic proposed and the overall applicability of EdgeON. Thorough performance evaluations were conducted on the core placement solutions implemented revealing the superiority of HSA when compared to widely used heuristics and common edge placement approaches (i.e., a MEC-based strategy). Furthermore, the practicality of EdgeON was tested through two main case studies placing services and virtual network functions over the previously optimally placed edge nodes. Overall, our proposal is an easy-to-use, effective and fully extensible tool that can be used by operators seeking to optimize the placement of computing, storage and networking infrastructure at the users’ vicinity. Therefore, our main contributions not only set strong foundations towards a cost-effective deployment and operation of an Edge Computing network, but directly impact the feasibility of upcoming 5G services/use cases and the extensive existing research regarding the placement of services and even network service chains at the edge

Towards delay-aware container-based Service Function Chaining in Fog Computing

Recently, the fifth-generation mobile network (5G) is getting significant attention. Empowered by Network Function Virtualization (NFV), 5G networks aim to support diverse services coming from different business verticals (e.g. Smart Cities, Automotive, etc). To fully leverage on NFV, services must be connected in a specific order forming a Service Function Chain (SFC). SFCs allow mobile operators to benefit from the high flexibility and low operational costs introduced by network softwarization. Additionally, Cloud computing is evolving towards a distributed paradigm called Fog Computing, which aims to provide a distributed cloud infrastructure by placing computational resources close to end-users. However, most SFC research only focuses on Multi-access Edge Computing (MEC) use cases where mobile operators aim to deploy services close to end-users. Bi-directional communication between Edges and Cloud are not considered in MEC, which in contrast is highly important in a Fog environment as in distributed anomaly detection services. Therefore, in this paper, we propose an SFC controller to optimize the placement of service chains in Fog environments, specifically tailored for Smart City use cases. Our approach has been validated on the Kubernetes platform, an open-source orchestrator for the automatic deployment of micro-services. Our SFC controller has been implemented as an extension to the scheduling features available in Kubernetes, enabling the efficient provisioning of container-based SFCs while optimizing resource allocation and reducing the end-to-end (E2E) latency. Results show that the proposed approach can lower the network latency up to 18% for the studied use case while conserving bandwidth when compared to the default scheduling mechanism