A Recursive Calibration Approach for Smart Antenna Beamforming Frontend

In this work, a simple iteration-based approach is proposed for calibration and characterization of the frequency, phase and transmit power relationship in a smart antenna Radio Frequency (RF) beamforming frontend, which has a very low computational complexity. The RF frontend has been experimentally calibrated, and the beamforming results are verified with the 4×4 phased array. The RF frontend has been built using off-the-shelf components for easy realization. The proposed architecture with the closed-loop monitoring and control such as the power control (Pctrl), power detection (Pdet), in addition to the phase control allows an automatic calibration of the beamforming weights, which forms a necessary process to ensure the accuracy of the antenna array beamforming

5G Uniform linear arrays with beamforming and spatial multiplexing at 28 GHz, 37 GHz, 64 GHz and 71 GHz for outdoor urban communication: A two-level approach

Multiple-input multiple-output (MIMO) spatial multiplexing and beamforming are regarded as key technology enablers for the fifth-generation (5G) millimeter wave (mmWave) mobile radio services. Spatial multiplexing requires sufficiently separated and incoherent antenna array elements, while in the case of beamforming, the antenna array elements need to be coherent and closely spaced. Extensive 28-, 60-, and 73-GHz ultra-wideband propagation measurements in cities of New York City and Austin have indicated formation of two or more spatial lobes for the angles-of-departure and angles-of-arrival even for line-of-sight (LOS) transmission, which is an advantageous feature of mmWave channels, indicating that the transmitting and receiving array antenna elements can be co-located, thus enabling a single architecture for both spatial multiplexing and beamforming. In this paper, a two-level beamforming architecture for uniform linear arrays is proposed that leverages the formation of these spatial lobes. The antenna array is composed of sub-arrays, and the impact of sub-array spacing on the spectral efficiency is investigated through simulations using a channel simulator named NYUSIM developed based on extensive measured data at mmWave frequencies. Simulation results indicate spectral efficiencies of 18.5–28.1 bits/s/Hz with a sub-array spacing of 16 wavelengths for an outdoor mmWave urban LOS channel. The spectral efficiencies obtained are for single-user (SU) MIMO transmission at the recently allocated 5G carrier frequencies in July 2016. The method and results in this paper are useful for designing antenna array architectures for 5G wireless systems

Energy Efficiency in 5G Communications – Conventional to Machine Learning Approaches, Journal of Telecommunications and Information Technology, 2020, nr 4

Demand for wireless and mobile data is increasing along with development of virtual reality (VR), augmented reality (AR), mixed reality (MR), and extended reality (ER) applications. In order to handle ultra-high data exchange rates while offering low latency levels, fifth generation (5G) networks have been proposed. Energy efficiency is one of the key objectives of 5G networks. The notion is defined as the ratio of throughput and total power consumption, and is measured using the number of transmission bits per Joule. In this paper, we review state-of-the-art techniques ensuring good energy efficiency in 5G wireless networks. We cover the base-station on/off technique, simultaneous wireless information and power transfer, small cells, coexistence of long term evolution (LTE) and 5G, signal processing algorithms, and the latest machine learning techniques. Finally, a comparison of a few recent research papers focusing on energy-efficient hybrid beamforming designs in massive multiple-input multiple-output (MIMO) systems is presented. Results show that machine learningbased designs may replace best performing conventional techniques thanks to a reduced complexity machine learning encode

A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives

The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain

Esquemas de pré-codificação e equalização para arquiteturas híbridas sub-conectadas na banda de ondas milimétricas

In the last years, the demand for high data rates increased substantially and the mobile communications are currently a necessity for our society. Thus, the number of users to access interactive services and applications has increased. The next generation of wireless communications (5G) is expected to be released in 2020 and it is projected to provide extremely high data rates for the users. The millimeter wave communications band and the massive MIMO are two promising keys technologies to achieve the multi Gbps for the future generations of mobile communications, in particular the 5G. The conjugation of these two technologies, allows packing a large number of antennas in the same volume than in the current frequencies and increase the spectral efficiency. However, when we have a large number of antennas, it is not reasonable to have a fully digital architecture due to the hardware constrains. On the other hand, it is not feasible to have a system that works only in the analog domain by employing a full analog beamforming since the performance is poor. Therefore, it is required a design of hybrid analog/digital architectures to reduce the complexity and achieve a good performance. Fully connected and sub-connected schemes are two examples of hybrid architectures. In the fully connected one, all RF chain connect to all antenna elements while in the sub-connected architecture, each RF chain is connected to a group of antennas. Consequently, the sub-connected architecture is more attractive due to the low complexity when compared to the fully connected one. Also, it is expected that millimeter waves be wideband, however, most of the works developed in last years for hybrid architectures are mainly focused in narrowband channels. Therefore, in this dissertation it is designed a low complex analog precoder at the user terminals and a hybrid analog-digital multi-user linear equalizer for broadband sub-connected millimeter wave massive MIMO at the base station. The analog precoder at the transmitter considers a quantized version of the average angle of departure of each cluster for its computation. In order to remove the multi-user interference, it is considered a hybrid sub-connected approach that minimizes the bit error rate (BER). The performance results show that the proposed hybrid sub-connected scheme is close to the hybrid full-connected design. However, due to the large number of connections, the full-connected scheme is slightly better than the proposed sub-connected scheme but with higher complexity. Therefore, the proposed analog precoder and hybrid sub-connected equalizer are more feasible to practical applications due to the good trade-off between performance and complexity.Nos últimos anos, a necessidade por elevadas taxas de transmissão de dados tem vindo a aumentar substancialmente uma vez que as comunicações móveis assumem cada vez mais um papel fundamental na sociedade atual. Por isso, o número de utilizadores que acedem a serviços e aplicações interativas tem vindo a aumentar. A próxima geração de comunicações móveis (5G) é esperada que seja lançada em 2020 e é projetada para fornecer elevadas taxas de transmissão de dados aos seus utilizadores. A comunicação na banda das ondas milimétricas e o MIMO massivo são duas tecnologias promissoras para alcançar os multi Gb/s para as comunicações móveis futuras, em particular o 5G. Conjugando essas duas tecnologias, permite-nos colocar um maior número de antenas no mesmo volume comparativamente às frequências atuais, aumentando assim a eficiência espectral. No entanto, quanto se tem um grande número de antenas, não é viável ter uma arquitetura totalmente digital devido às restrições de hardware. Por outro lado, não é viável ter um sistema que trabalhe apenas no domínio analógico. Assim sendo, é necessária uma arquitetura híbrida analógica-digital de modo a remover a complexidade geral do sistema. É esperado que os sistemas de comunicação baseados em ondas milimétricas sejam de banda larga, no entanto, a maioria dos trabalhos feitos para arquiteturas híbridas são focados em canais de banda estreita. Dois exemplos de soluções híbridas são as arquiteturas completamente conectada e sub-conectada. Na primeira, todas as cadeias RF estão ligadas a todas as antenas enquanto na arquitetura sub-conectada cada cadeia RF é ligada apenas a um grupo de antenas. Consequentemente, a arquitetura sub-conectada é mais interessante do ponto de vista prático devido à sua menor complexidade quando comparada à arquitetura completamente conectada. Nesta dissertação é projetado um pré-codificador analógico de baixa complexidade no terminal móvel, combinado com um equalizador multiutilizador desenhado para uma arquitetura híbrida sub-conectada, implementado na estação base. O pré-codificador no transmissor assume um conhecimento parcial da informação do canal e, de modo a remover eficientemente a interferência multiutilizador, é proposta também uma arquitetura híbrida sub-conectada que minimiza a taxa média de erro. Os resultados de desempenho mostram que o esquema híbrido sub-conectado proposto está próximo da arquitetura híbrida completamente conectada. No entanto, devido ao grande número de conexões, a arquitetura híbrida completamente conectada é ligeiramente melhor que a arquitetura sub-conectada proposta à custa de uma maior complexidade. Assim sendo, o pré-codificador analógico e o equalizador sub-conectado híbrido proposto são mais viáveis para aplicações práticas devido ao compromisso entre o desempenho e a complexidade.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

Técnicas de quantização para sistemas de comunicação híbridos na banda de ondas milimétricas com um número elevado de antenas

Since the appearance of mobile communications, the users of this technology have been growing exponentially every day. The escalating mobile traffic growth it has been imposed by the proliferation of smartphones and tablets. The increasing and more intensive use of wireless communications may lead to a future breaking point, where the traditional systems will fail to support the required capability, spectral and energy efficiency. On the other hand, to cover all this current need to have more and more data it is necessary to provide a new range of data rates around the gigabits per second. Today, almost all mobile communications systems use spectrum in the range of 300MHz – 3GHz. It is needed to start looking to the range of 3GHz – 300GHz spectrum for mobile broadband applications. Millimeter waves are one way to alleviate the spectrum gridlock at lower frequencies. MIMO based systems has been researched for the last 20 years and are now part of the current standards. However, to achieve more gains, a grander view of the MIMO concept envisions the use of a large scale of antennas at each base stations, a concept referred as massive MIMO. The symbiotic combination of these technologies and other ones will lead to the development of a new generation system known as the 5G. The knowledge of the channel state information at the transmitter is very important in real massive MIMO millimeter wave systems. In this dissertation a limited feedback strategy for a hybrid massive MIMO OFDM system is proposed, where only a part of the parameters associated to the link channel are quantized and fed back. The limited feedback strategy employs a uniform-based quantization for channel amplitudes, angle of departure and angle of arrival in time domain. After being fed back, this information is used to reconstruct the overall channel in frequency domain and the transmit antenna array, which are then used to compute the hybrid analog-digital precoders. Numerical results show that the proposed quantization strategy achieve a performance close to the one obtained with perfect full channel, with a low overhead and complexityDesde o aparecimento das comunicações móveis, os utilizadores desta tecnologia têm vindo a crescer exponencialmente todos os dias. A escalada do crescimento do tráfego móvel foi imposta, principalmente, pela proliferação de smartphones e tablets. O uso crescente e intensivo das comunicações sem fios pode levar no futuro a um ponto de rutura, onde os sistemas tradicionais não suportam a capacidade requerida, a eficiência espectral e eficiência enérgica. Por outro lado, para cobrir toda esta necessidade atual de ter mais e mais dados, é necessário fornecer taxas de transmissão mais elevadas, em torno dos gigabits por segundo. Hoje, quase todos os sistemas de comunicações móveis usam espectro na faixa de 300 MHz - 3GHz. É necessário começar a procurar a gama de espectro 3GHz - 300 GHz para aplicações de banda larga móvel. Aqui vamos apresentar as ondas milimétricas, sendo esta uma maneira de aliviar espectro em frequências mais baixas. Os sistemas baseados em MIMO foram alvo de pesquisa nos últimos 20 anos e agora fazem parte dos padrões atuais. No entanto, para obter mais ganhos, uma visão mais ampla do conceito MIMO prevê o uso de uma grande quantidade de antenas em cada estação base, um conceito referido como massive MIMO. A combinação simbiótica destas tecnologias levará ao desenvolvimento de um novo sistema de geração denominado 5G. O desenvolvimento de técnicas de conhecimento da informação do canal no transmissor é muito importante em sistemas massive MIMO millimeter wave reais. Nesta dissertação é proposta e avaliada uma estratégia de envio de informação de canal para o transmissor para sistemas massive MIMO OFDM híbrido, onde apenas uma parte dos parâmetros associados ao canal são quantificados e transmitidos para o transmissor. A estratégia de feedback proposta é baseada numa quantização uniforme das amplitudes de canal, ângulos de partida e de chegada, no domínio do tempo. Depois de serem enviadas, essas informações são usadas para reconstruir o canal geral no domínio da frequência e a matriz da antena de transmissão, que são então usadas para obter os precoders híbridos analógico-digitais. Os resultados numéricos mostram que a estratégia de quantificação proposta atinge um desempenho próximo ao obtido caso se conhecesse o canal perfeito no transmissor, com um baixo overhead e complexidadeMestrado em Engenharia Eletrónica e Telecomunicaçõe

Energy-efficient Heterogeneous Wireless Communication with Extended SDN-Controller

芝浦工業大学2017年