Source localization via time difference of arrival

Accurate localization of a signal source, based on the signals collected by a number of receiving sensors deployed in the source surrounding area is a problem of interest in various fields. This dissertation aims at exploring different techniques to improve the localization accuracy of non-cooperative sources, i.e., sources for which the specific transmitted symbols and the time of the transmitted signal are unknown to the receiving sensors. With the localization of non-cooperative sources, time difference of arrival (TDOA) of the signals received at pairs of sensors is typically employed. A two-stage localization method in multipath environments is proposed. During the first stage, TDOA of the signals received at pairs of sensors is estimated. In the second stage, the actual location is computed from the TDOA estimates. This later stage is referred to as hyperbolic localization and it generally involves a non-convex optimization. For the first stage, a TDOA estimation method that exploits the sparsity of multipath channels is proposed. This is formulated as an f1-regularization problem, where the f1-norm is used as channel sparsity constraint. For the second stage, three methods are proposed to offer high accuracy at different computational costs. The first method takes a semi-definite relaxation (SDR) approach to relax the hyperbolic localization to a convex optimization. The second method follows a linearized formulation of the problem and seeks a biased estimate of improved accuracy. A third method is proposed to exploit the source sparsity. With this, the hyperbolic localization is formulated as an an f1-regularization problem, where the f1-norm is used as source sparsity constraint. The proposed methods compare favorably to other existing methods, each of them having its own advantages. The SDR method has the advantage of simplicity and low computational cost. The second method may perform better than the SDR approach in some situations, but at the price of higher computational cost. The l1-regularization may outperform the first two methods, but is sensitive to the choice of a regularization parameter. The proposed two-stage localization approach is shown to deliver higher accuracy and robustness to noise, compared to existing TDOA localization methods. A single-stage source localization method is explored. The approach is coherent in the sense that, in addition to the TDOA information, it utilizes the relative carrier phases of the received signals among pairs of sensors. A location estimator is constructed based on a maximum likelihood metric. The potential of accuracy improvement by the coherent approach is shown through the Cramer Rao lower bound (CRB). However, the technique has to contend with high peak sidelobes in the localization metric, especially at low signal-to-noise ratio (SNR). Employing a small antenna array at each sensor is shown to lower the sidelobes level in the localization metric. Finally, the performance of time delay and amplitude estimation from samples of the received signal taken at rates lower than the conventional Nyquist rate is evaluated. To this end, a CRB is developed and its variation with system parameters is analyzed. It is shown that while with noiseless low rate sampling there is no estimation accuracy loss compared to Nyquist sampling, in the presence of additive noise the performance degrades significantly. However, increasing the low sampling rate by a small factor leads to significant performance improvement, especially for time delay estimation

Improvement of detection and tracking techniques in multistatic passive radar systems. (Mejora de técnicas de detección y seguimiento en sistemas radar pasivos multiestáticos)

Esta tesis doctoral es el resultado de una intensa actividad investigadora centrada en los sensores radar pasivos para la mejora de las capacidades de detección y seguimiento en escenarios complejos con blancos terrestres y pequeños drones. El trabajo de investigación se ha llevado a cabo en el grupo de investigación coordinado por la Dra. María Pilar Jarabo Amores, dentro del marco diferentes proyectos: IDEPAR (“Improved DEtection techniques for PAssive Radars”), MASTERSAT (“MultichAnnel paSsive radar receiver exploiting TERrestrial and SATellite Illuminators”) y KRIPTON (“A Knowledge based appRoach to passIve radar detection using wideband sPace adapTive prOcessiNg”) financiados por el Ministerio de Economía y Competitividad de España; MAPIS (Multichannel passive ISAR imaging for military applications) y JAMPAR (“JAMmer-based PAssive Radar”), financiados por la Agencia Europea de Defensa (EDA) . El objetivo principal es la mejora de las técnicas de detección y seguimiento en radares pasivos con configuraciones biestáticas y multiestaticas. En el documento se desarrollan algoritmos para el aprovechamiento de señales procedentes de distintos iluminadores de oportunidad (transmisores DVB-T, satélites DVB-S y señales GPS). Las soluciones propuestas han sido integradas en el demostrador tecnológico IDEPAR, desarrollado y actualizado bajo los proyectos mencionados, y validadas en escenarios reales declarados de interés por potenciales usuarios finales (Direccion general de armamento y material, instituto nacional de tecnología aeroespacial y la armada española). Para el desarrollo y evaluación de cadenas de las cadenas de procesado, se plantean dos casos de estudio: blancos terrestres en escenarios semiurbanos edificios y pequeños blancos aéreos en escenarios rurales y costeros. Las principales contribuciones se pueden resumir en los siguientes puntos: • Diseño de técnicas de seguimiento 2D en el espacio de trabajo rango biestático-frecuencia Doppler: se desarrollan técnicas de seguimiento para los dos casos de estudio, localización de blancos terrestres y pequeños drones. Para es último se implementan técnicas capaces de seguir tanto el movimiento del dron como su firma Doppler, lo que permite implementar técnicas de clasificación de blancos. • Diseño de técnicas de seguimiento de blancos capaces de integrar información en el espacio 3D (rango, Doppler y acimut): se diseñan técnicas basadas en procesado en dos etapas, una primera con seguimiento en 2D para el filtrado de falsas alarmas y la segunda para el seguimiento en 3D y la conversión de coordenadas a un plano local cartesiano. Se comparan soluciones basadas en filtros de Kalman para sistemas tanto lineales como no lineales. • Diseño de cadenas de procesado para sistemas multiestáticos: la información estimada del blanco sobre múltiples geometrías biestáticas es utilizada para incremento de las capacidades de localización del blanco en el plano cartesiano local. Se presentan soluciones basadas en filtros de Kalman para sistemas no lineales explotando diferentes medidas biestáticas en el proceso de transformación de coordenadas, analizando las mejoras de precisión en la localización del blanco. • Diseño de etapas de procesado para radares pasivos basados en señales satelitales de las constelaciones GPS DVB-S. Se estudian las características de las señales satelitales identificando sus inconvenientes y proponiendo cadenas de procesado que permitan su utilización para la detección y seguimiento de blancos terrestres. • Estudio del uso de señales DVB-T multicanal con gaps de transmisión entre los diferentes canales en sistemas radares pasivos. Con ello se incrementa la resolución del sistema, y las capacidades de detección, seguimiento y localización. Se estudia el modelo de señal multicanal, sus efectos sobre el procesado coherente y se proponen cadenas de procesado para paliar los efectos adversos de este tipo de señales

Algorithms for propagation-aware underwater ranging and localization

Mención Internacional en el título de doctorWhile oceans occupy most of our planet, their exploration and conservation are one of the crucial research problems of modern time. Underwater localization stands among the key issues on the way to the proper inspection and monitoring of this significant part of our world. In this thesis, we investigate and tackle different challenges related to underwater ranging and localization. In particular, we focus on algorithms that consider underwater acoustic channel properties. This group of algorithms utilizes additional information about the environment and its impact on acoustic signal propagation, in order to improve the accuracy of location estimates, or to achieve a reduced complexity, or a reduced amount of resources (e.g., anchor nodes) compared to traditional algorithms. First, we tackle the problem of passive range estimation using the differences in the times of arrival of multipath replicas of a transmitted acoustic signal. This is a costand energy- effective algorithm that can be used for the localization of autonomous underwater vehicles (AUVs), and utilizes information about signal propagation. We study the accuracy of this method in the simplified case of constant sound speed profile (SSP) and compare it to a more realistic case with various non-constant SSP. We also propose an auxiliary quantity called effective sound speed. This quantity, when modeling acoustic propagation via ray models, takes into account the difference between rectilinear and non-rectilinear sound ray paths. According to our evaluation, this offers improved range estimation results with respect to standard algorithms that consider the actual value of the speed of sound. We then propose an algorithm suitable for the non-invasive tracking of AUVs or vocalizing marine animals, using only a single receiver. This algorithm evaluates the underwater acoustic channel impulse response differences induced by a diverse sea bottom profile, and proposes a computationally- and energy-efficient solution for passive localization. Finally, we propose another algorithm to solve the issue of 3D acoustic localization and tracking of marine fauna. To reach the expected degree of accuracy, more sensors are often required than are available in typical commercial off-the-shelf (COTS) phased arrays found, e.g., in ultra short baseline (USBL) systems. Direct combination of multiple COTS arrays may be constrained by array body elements, and lead to breaking the optimal array element spacing, or the desired array layout. Thus, the application of state-of-the-art direction of arrival (DoA) estimation algorithms may not be possible. We propose a solution for passive 3D localization and tracking using a wideband acoustic array of arbitrary shape, and validate the algorithm in multiple experiments, involving both active and passive targets.Part of the research in this thesis has been supported by the EU H2020 program under project SYMBIOSIS (G.A. no. 773753).This work has been supported by IMDEA Networks InstitutePrograma de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Paul Daniel Mitchell.- Secretario: Antonio Fernández Anta.- Vocal: Santiago Zazo Bell

Effects of the Sensors Arrangement on the Efficiency of Multi-Transmitter and Multi-Receiver Passive Radar

883-889Passive radar is of interest in many aspects. These radars accomplish target localization by receiver sensors. In this paper, we investigate the effect of the sensors arrangement on the performance of multi-transmitter and multi-receiver passive radar and present a method to maximize target localization accuracy on the important locations by the optimal arrangement of receiver sensors. The proposed method is based on the Cramer-Rao lower band. The optimal placement of receiver sensors can be achieved with the help of the proposed method. We investigate the types of sensors arrangement for better accuracy in the surveillance area. The provided Cramer-Rao lower band is developed for the use of time difference of arrival measurements and the angle of arrival measurements. As illustrated in the simulations results, the joint use of both the time difference of arrival and the angle of arrival is better than the use of them alone. Furthermore, the blind areas caused by the receiver sensors arrangement are eliminated by the joint use of measurement. On the other hand, the target localization efficiency increases with the increasing distance between sensors and their dispersion in the environment

Effects of the Sensors Arrangement on the Efficiency of Multi-Transmitter and Multi-Receiver Passive Radar

Passive radar is of interest in many aspects. These radars accomplish target localization by receiver sensors. In this paper, we investigate the effect of the sensors arrangement on the performance of multi-transmitter and multi-receiver passive radar and present a method to maximize target localization accuracy on the important locations by the optimal arrangement of receiver sensors. The proposed method is based on the Cramer-Rao lower band. The optimal placement of receiver sensors can be achieved with the help of the proposed method. We investigate the types of sensors arrangement for better accuracy in the surveillance area. The provided Cramer-Rao lower band is developed for the use of time difference of arrival measurements and the angle of arrival measurements. As illustrated in the simulations results, the joint use of both the time difference of arrival and the angle of arrival is better than the use of them alone. Furthermore, the blind areas caused by the receiver sensors arrangement are eliminated by the joint use of measurement. On the other hand, the target localization efficiency increases with the increasing distance between sensors and their dispersion in the environment

EM Algorithm for Multiple Wideband Source Localization

A computationally efficient algorithm using the expectation-maximization (EM) algorithm for multiple wideband source localization in the near field of a sensor array/area is addressed in this thesis. Our idea is to decompose the observed sensor data, which is a superimposition of multiple sources, into the individual components in the frequency domain and then estimate the corresponding location parameters associated with each component separately. Instead of the conventional alternating projection (AP) method, we propose to adopt the EM algorithm in this work; our new method involves two steps, namely Expectation (E-step) and Maximization (M-step). In the E-step, the individual incident source waveforms are estimated. Then, in the M-step, the maximum likelihood estimates of the source location parameters are obtained. These two steps are executed iteratively and alternatively until the pre-defined convergence is reached. The computational complexity comparison between our proposed EM algorithm and the existing AP scheme is investigated. It is shown through Monte Carlo simulations that the computational complexity of the proposed EM algorithm is significantly lower than that of the existing AP algorithm

Multi-node TOA-DOA cooperative LOS-NLOS localization : enabling high accuracy and reliability

This dissertation investigates high performance cooperative localization in wireless environments based on multi-node time-of-arrival (TOA) and direction-of-arrival (DOA) estimations in line-of-sight (LOS) and non-LOS (NLOS) scenarios. Here, two categories of nodes are assumed: base nodes (BNs) and target nodes (TNs). BNs are equipped with antenna arrays and capable of estimating TOA (range) and DOA (angle). TNs are equipped with Omni-directional antennas and communicate with BNs to allow BNs to localize TNs; thus, the proposed localization is maintained by BNs and TNs cooperation. First, a LOS localization method is proposed, which is based on semi-distributed multi-node TOA-DOA fusion. The proposed technique is applicable to mobile ad-hoc networks (MANETs). We assume LOS is available between BNs and TNs. One BN is selected as the reference BN, and other nodes are localized in the coordinates of the reference BN. Each BN can localize TNs located in its coverage area independently. In addition, a TN might be localized by multiple BNs. High performance localization is attainable via multi-node TOA-DOA fusion. The complexity of the semi-distributed multi-node TOA-DOA fusion is low because the total computational load is distributed across all BNs. To evaluate the localization accuracy of the proposed method, we compare the proposed method with global positioning system (GPS) aided TOA (DOA) fusion, which are applicable to MANETs. The comparison criterion is the localization circular error probability (CEP). The results confirm that the proposed method is suitable for moderate scale MANETs, while GPS-aided TOA fusion is suitable for large scale MANETs. Usually, TOA and DOA of TNs are periodically estimated by BNs. Thus, Kalman filter (KF) is integrated with multi-node TOA-DOA fusion to further improve its performance. The integration of KF and multi-node TOA-DOA fusion is compared with extended-KF (EKF) when it is applied to multiple TOA-DOA estimations made by multiple BNs. The comparison depicts that it is stable (no divergence takes place) and its accuracy is slightly lower than that of the EKF, if the EKF converges. However, the EKF may diverge while the integration of KF and multi-node TOA-DOA fusion does not; thus, the reliability of the proposed method is higher. In addition, the computational complexity of the integration of KF and multi-node TOA-DOA fusion is much lower than that of EKF. In wireless environments, LOS might be obstructed. This degrades the localization reliability. Antenna arrays installed at each BN is incorporated to allow each BN to identify NLOS scenarios independently. Here, a single BN measures the phase difference across two antenna elements using a synchronized bi-receiver system, and maps it into wireless channel’s K-factor. The larger K is, the more likely the channel would be a LOS one. Next, the K-factor is incorporated to identify NLOS scenarios. The performance of this system is characterized in terms of probability of LOS and NLOS identification. The latency of the method is small. Finally, a multi-node NLOS identification and localization method is proposed to improve localization reliability. In this case, multiple BNs engage in the process of NLOS identification, shared reflectors determination and localization, and NLOS TN localization. In NLOS scenarios, when there are three or more shared reflectors, those reflectors are localized via DOA fusion, and then a TN is localized via TOA fusion based on the localization of shared reflectors