PAPR Reduction and Sidelobe Suppression in Cognitive OFDM - A Survey

Cognitive radio (CR) is one of the key technology providing a new way to enhance the utilization of available spectrum effectively. The multicarrier modulation (MCM) technique which is widely used is Orthogonal Frequency Division Multiplexing (OFDM) system, is an excellent choice for high data rate application. The main two limitations of this technology is the high peak-to-average power ratio (PAPR) of transmission signal and large spectrum sidelobe. This article describes some of the important PAPR reduction techniques and sidelobe suppression techniques

PAPR Reduction and Sidelobe Suppression in Cognitive OFDM - A Survey

Cognitive radio (CR) is one of the key technology providing a new way to enhance the utilization of available spectrum effectively. The multicarrier modulation (MCM) technique which is widely used is Orthogonal Frequency Division Multiplexing (OFDM) system, is an excellent choice for high data rate application. The main two limitations of this technology is the high peak-to-average power ratio (PAPR) of transmission signal and large spectrum sidelobe. This article describes some of the important PAPR reduction techniques and sidelobe suppression techniques

Joint time-frequency alignment for PAPR and OOBE suppression of OFDM-based waveforms

WOS: 000418138700009Orthogonal frequency division multiplexing (OFDM) waveform has been adopted by many wireless standards due to its numerous advantages. However, OFDM symbols have two critical drawbacks: high out-of-band emission (OOBE) and high peak-to-average power ratio (PAPR). Cyclic prefix (CP) alignment is one of the promising methods that jointly suppresses the OOBE and PAPR of OFDM symbols without introducing extra receiver complexity. However, its suppression performance remains limited in practical scenarios as it only exploits the degrees of freedom (DoFs) provided by the CP part of the OFDM symbols. In this letter, we propose a novel approach which jointly exploits the time domain resources, i.e., CP, and the frequency domain resources that are not effectively used by the receiver, i.e., guard tones and the subcarriers faded by the multipath channel. Thus, the available DoFs are substantially increased and more efficiently utilized for alignment purpose. It is shown that the OOBE and PAPR suppression performance is significantly enhanced with the proposed method as compared with the original approach

Suppression of Mutual Interference in OFDM Based Overlay Systems

A promising appraoch for overcoming spectrum scarcity are overlay systems that share a frequency band with already existing licensed systems by using the spectral gaps left by the licensed systems. Due to its spectral efficiency and flexibility orthogonal frequency-division multiplexing (OFDM) is an appropriate modulation technique for overlay systems. To enable a successful co-existence, techniques for suppressing mutual interferences between the overlay and the licensed system are proposed

Joint design of PAPR, PICR and OBP in OFDM systems

Orthogonal frequency division multiplexing (OFDM) technique has been adopted by many existing and future wireless communication systems for high-speed data transmission. However, a major problem of OFDM systems is the high peak-to-average power ratio (PAPR) of OFDM signals, which results in inefficient operations of nonlinear devices in the system such as power amplifiers (PAs). On the other hand, at the receiver end, frequency offset, caused by Doppler frequency shifts, mismatched oscillators, or a fast fading channel, destroys the orthogonality among subcarriers and results in inter-carrier interference (ICI), thus degrades the detection performance of OFDM systems. Analogous to the definition of PAPR, the peak interference-to-carrier ratio (PICR) is defined to represent the effect of ICI. In addition, due to the sidelobes of modulated subcarriers, OFDM systems also suffer from high out-of-band power (OBP) radiations. High OBP results in the need for wide guard band and thus inefficient usage of frequency band

Waveform Design for Ground-Penetrating Radar

A ground-penetrating radar is being designed to find subterranean structures. This is difficult to do because of varying mediums. Having more bandwidth can help mitigate this problem. Because the frequency spectrum is so cluttered, one method to do this is to use non-contiguous orthogonal frequency division multiplexing (NC-OFDM) to occupy several free areas of the spectrum. An NC-OFDM waveform was designed and optimized with respect to peak-to-average-power ratio, orthogonality, spectral leakage and autocorrelation sidelobes. Techniques such as the use of a Zadoff-Chu sequence and a gap filling algorithm were implemented to do this. The waveform was tested in simulation to show that while computationally expensive, this may be a viable waveform for ground-penetrating radar

Spectrum Adaptation in Cognitive Radio Systems with Operating Constraints

The explosion of high-data-rate-demanding wireless applications such as smart-phones and wireless Internet access devices, together with growth of existing wireless services, are creating a shortage of the scarce Radio Frequency (RF) spectrum. However, several spectrum measurement campaigns revealed that current spectrum usage across time and frequency is inefficient, creating the artificial shortage of the spectrum because of the traditional exclusive command-and-control model of using the spectrum. Therefore, a new concept of Cognitive Radio (CR) has been emerging recently in which unlicensed users temporarily borrow spectrum from the licensed Primary Users (PU) based on the Dynamic Spectrum Access (DSA) technique that is also known as the spectrum sharing concept. A CR is an intelligent radio system based on the Software Defined Radio platform with artificial intelligence capability which can learn, adapt, and reconfigure through interaction with the operating environment. A CR system will revolutionize the way people share the RF spectrum, lowering harmful interference to the licensed PU of the spectrum, fostering innovative DSA technology and giving people more choices when it comes to using the wireless-communication-dependent applications without having any spectrum congestion problems. A key technical challenge for enabling secondary access to the licensed spectrum adaptation is to ensure that the CR does not interfere with the licensed incumbent users. However, incumbent user behavior is dynamic and requires CR systems to adapt this behavior in order to maintain smooth information transmission. In this context, the objective of this dissertation is to explore design issues for CR systems focusing on adaptation of physical layer parameters related to spectrum sensing, spectrum shaping, and rate/power control. Specifically, this dissertation discusses dynamic threshold adaptation for energy detector spectrum sensing, spectrum allocation and power control in Orthogonal Frequency Division Multiplexing-(OFDM-)based CR with operating constraints, and adjacent band interference suppression techniques in turbo-coded OFDM-based CR systems

Physical Layer Techniques for OFDM-Based Cognitive Radios

Cognitive radio has recently been proposed as a promising approach for efficient utilization of radio spectrum. However, there are several challenges to be addressed across all layers of a cognitive radio system design, from application to hardware implementation. From the physical layer point-of-view, two key challenges are spectrum sensing and an appropriate signaling scheme for data transmission. The modulation techniques used in cognitive radio not only should be efficient and flexible but also must not cause (harmful) interference to the primary (licensed) users. Among all the proposed signaling schemes for cognitive radio, orthogonal frequency division multiplexing (OFDM) has emerged as a promising one due to its robustness against multipath fading, high spectral efficiency, and capacity for dynamic spectrum use. However, OFDM suffers from high out-of-band radiation which is due to high sidelobes of subcarriers. In this thesis, we consider spectral shaping in OFDM-based cognitive radio systems with focus on reducing interference to primary users created by by out-of-band radiation of secondary users' OFDM signal. In the first part of this research, we first study the trade-o between time-based and frequency-based methods proposed for sidelobe suppression in OFDM. To this end, two recently proposed techniques, active interference cancellation (AIC) and adaptive symbol transition (AST), are considered and a new joint time-frequency scheme is developed for both single-antenna and multi-antenna systems. Furthermore, knowledge of wireless channel is used in the setting of the proposed joint scheme to better minimize interference to the primary user. This scheme enables us to evaluate the trade-o between the degrees of freedom provided by each of the two aforementioned methods. In the second part of this research, a novel low-complexity technique for reducing out-of-band radiation power of OFDM subcarriers for both single-antenna and multi-antenna systems is proposed. In the new technique, referred to as a phase adjustment technique, each OFDM symbol is rotated in the complex plane by an optimal phase such that the interference to primary users is minimized. It is shown that the phase adjustment technique neither reduces the system throughput, nor does increase the bit-error-rate of the system. Moreover, the performance of the technique in interference reduction is evaluated analytically in some special cases and is verified using numerical simulations. Due to high sensitivity of OFDM systems to time and frequency synchronization errors, performance of spectral shaping techniques in OFDM is significantly affected by timing jitter in practical systems. In the last part of this research, we investigate the impact of timing jitter on sidelobe suppression techniques. Considering AIC as the base method of sidelobe suppression, we first propose a mathematical model for OFDM spectrum in presence of timing jitter and evaluate the performance degradation to AIC due to timing jitter. Then, a precautionary scheme based on a minimax approach is proposed to make the technique robust against random timing jitter.4 month