45 research outputs found
Transceiver Design for MIMO DCO-OFDM in Visible Light Communication
Direct current-biased optical-orthogonal frequency-division multiplexing (DCO-OFDM) is a simple yet spectrally efficient multicarrier modulation scheme for visible light communication (VLC). But in multiple-input multiple-output (MIMO) scenario, which is more practical for VLC due to the LED deployment, the research on DCO-OFDM is still limited and calls for in-depth investigation. In this chapter, we first study the basic modulation scheme of DCO-OFDM, including the design of conventional receiver without considering the clipping noise. Secondly, we present a novel receiver for combating clipping distortion in the DCO-OFDM system, which can reconstruct the clipping noise and subtract it from the received signal. Thirdly, we generalize the results to MIMO scenario and investigate the preliminary transceiver design, which is based on the minimum mean-square error (MMSE) criteria. Based on this, we propose a precoding algorithm to further enhance the performance. Finally, the symbol error rate performance is compared through computer simulations to give the reader a whole picture of the performance of MIMO VLC system
DC-Informative Joint Color-Frequency Modulation for Visible Light Communications
In this paper, we consider the problem of constellation design for a visible
light communication (VLC) system using red/green/blue light-emitting diodes
(RGB LED), and propose a method termed DC-informative joint color-frequency
modulation (DCI-JCFM). This method jointly utilizes available diversity
resources including different optical wavelengths, multiple baseband
subcarriers, and adaptive DC-bias. Constellation is designed in a high
dimensional space, where the compact sphere packing advantage over lower
dimensional counterparts is utilized. Taking into account multiple practical
illumination constraints, a non-convex optimization problem is formulated,
seeking the least error rate with a fixed spectral efficiency. The proposed
scheme is compared with a decoupled scheme, where constellation is designed
separately for each LED. Notable gains for DCI-JCFM are observed through
simulations where balanced, unbalanced and very unbalanced color illuminations
are considered.Comment: submitted to Journal of Lightwave Technology, Aug. 5th 201
Joint dimming control and transceiver design for MIMO-aided visible light communication
The multiple-input multiple-output (MIMO) concept has been readily invoked in visible light communication (VLC) for increasing data rate. In this paper, we conceive a general solution of dimming control and MIMO transceiver design for VLC, which is capable of minimizing the mean-squared error between the transmitted and received signals, while at the same time, maintaining a specific indoor illumination level. We take into consideration practical optical constraints in the design, including the LED non-linearity and the specific dimming requirements. An efficient solution of our design problem is derived by conceiving a projected gradient algorithm. Our numerical results show that the proposed scheme achieves better bit error rate (BER) performance as well as significantly higher convergence speed than its benchmarker conceived in 2015
Multi-User Visible Light Communication Broadcast Channels With Zero-Forcing Precoding
This paper studies zero-forcing (ZF) precoding designs for multi-user multiple-input single-output visible light communication (VLC) broadcast channels. In such broadcast systems, the main challenging issue arises from the presence of multi-user interference (MUI) among non-coordinated users. In order to completely suppress the MUI, ZF precoding, which is originally designed for radio frequency (RF) communications, is adopted. Different from RF counterpart, VLC signal is inherently non-negative and has a limited linear range, which leads to an amplitude constraint on the input data signal. Unlike the average power constraint, obtaining the exact capacity for an amplitude-constrained channel is more cumbersome. In this paper, we first investigate lower and upper bounds on the capacity of an amplitude-constrained Gaussian channel, which are especially tight in the high signal-to-noise regime. Based on the derived bounds, optimal beamformer designs for the max-min fairness sum-rate and the maximum sum-rate problems are formulated as convex optimization problems, which then can be efficiently solved by using standard optimization packages
Precoded Chebyshev-NLMS based pre-distorter for nonlinear LED compensation in NOMA-VLC
Visible light communication (VLC) is one of the main technologies driving the
future 5G communication systems due to its ability to support high data rates
with low power consumption, thereby facilitating high speed green
communications. To further increase the capacity of VLC systems, a technique
called non-orthogonal multiple access (NOMA) has been suggested to cater to
increasing demand for bandwidth, whereby users' signals are superimposed prior
to transmission and detected at each user equipment using successive
interference cancellation (SIC). Some recent results on NOMA exist which
greatly enhance the achievable capacity as compared to orthogonal multiple
access techniques. However, one of the performance-limiting factors affecting
VLC systems is the nonlinear characteristics of a light emitting diode (LED).
This paper considers the nonlinear LED characteristics in the design of
pre-distorter for cognitive radio inspired NOMA in VLC, and proposes singular
value decomposition based Chebyshev precoding to improve performance of
nonlinear multiple-input multiple output NOMA-VLC. A novel and generalized
power allocation strategy is also derived in this work, which is valid even in
scenarios when users experience similar channels. Additionally, in this work,
analytical upper bounds for the bit error rate of the proposed detector are
derived for square -quadrature amplitude modulation.Comment: R. Mitra and V. Bhatia are with Indian Institute of Technology
Indore, Indore-453552, India, Email:[email protected],
[email protected]. This work was submitted to IEEE Transactions on
Communications on October 26, 2016, decisioned on March 3, 2017, and revised
on April 25, 2017, and is currently under review in IEEE Transactions on
Communication
Optical Asymmetric Modulation for VLC Systems
The explosive growth of connected devices and the increasing number of broadband users have led to an unprecedented growth in traffic demand. To this effect, the next generation wireless systems are envisioned to meet this growth and offer a potential data rate of 10 Gbps or more. In this context, an attractive solution to the current spectrum crunch issue is to exploit the visible light spectrum for the realization of high-speed commutation systems. However, this requires solutions to certain challenges relating to visible light communications (VLC), such as the stringent requirements of VLC-based intensity modulation and direct detection (IM/DD), which require signals to be real and unipolar. The present work proposes a novel power-domain multiplexing based optical asymmetric modulation (OAM) scheme for indoor VLC systems, which is particularly adapted to transmit high-order modulation signals using linear real and unipolar constellations that fit into the restrictions of IM/DD systems. It is shown that the proposed scheme provides improved system performance that outperforms alternative modulation schemes, at no extra complexity
Channel capacity and performance evaluation of precoded MIMO-OFDM system with large-size constellation
Multiple input-multiple output (MIMO) is a multipath diversity exploring approach which is emerged with orthogonal frequency division multiplexing (OFDM) to produce MIMO-OFDM that is widely used in wireless communications. This paper presents a discrete Hart-ley transform (DHT) precoded MIMO-OFDM system over multipath frequency-selective fading channel with large-size quadrature amplitude modulation (16-QAM, 64-QAM and 256-QAM). A mathematical models for the BER and channel capacity over mutlipath fading channels are also derived in this paper. Average Bit-error-rate (BER) and channel capacity of the presented system is considered and compared with that of the traditional MIMO-OFDM. Simulation results shows that the transmission performance and channel capacity of the proposed schemes is better than that of the traditional MIMO-OFDM without a pre-coder