Whether and Where to Code in the Wireless Relay Channel

The throughput benefits of random linear network codes have been studied extensively for wirelined and wireless erasure networks. It is often assumed that all nodes within a network perform coding operations. In energy-constrained systems, however, coding subgraphs should be chosen to control the number of coding nodes while maintaining throughput. In this paper, we explore the strategic use of network coding in the wireless packet erasure relay channel according to both throughput and energy metrics. In the relay channel, a single source communicates to a single sink through the aid of a half-duplex relay. The fluid flow model is used to describe the case where both the source and the relay are coding, and Markov chain models are proposed to describe packet evolution if only the source or only the relay is coding. In addition to transmission energy, we take into account coding and reception energies. We show that coding at the relay alone while operating in a rateless fashion is neither throughput nor energy efficient. Given a set of system parameters, our analysis determines the optimal amount of time the relay should participate in the transmission, and where coding should be performed.Comment: 11 pages, 12 figures, to be published in the IEEE JSAC Special Issue on Theories and Methods for Advanced Wireless Relay

Bilayer Low-Density Parity-Check Codes for Decode-and-Forward in Relay Channels

This paper describes an efficient implementation of binning for the relay channel using low-density parity-check (LDPC) codes. We devise bilayer LDPC codes to approach the theoretically promised rate of the decode-and-forward relaying strategy by incorporating relay-generated information bits in specially designed bilayer graphical code structures. While conventional LDPC codes are sensitively tuned to operate efficiently at a certain channel parameter, the proposed bilayer LDPC codes are capable of working at two different channel parameters and two different rates: that at the relay and at the destination. To analyze the performance of bilayer LDPC codes, bilayer density evolution is devised as an extension of the standard density evolution algorithm. Based on bilayer density evolution, a design methodology is developed for the bilayer codes in which the degree distribution is iteratively improved using linear programming. Further, in order to approach the theoretical decode-and-forward rate for a wide range of channel parameters, this paper proposes two different forms bilayer codes, the bilayer-expurgated and bilayer-lengthened codes. It is demonstrated that a properly designed bilayer LDPC code can achieve an asymptotic infinite-length threshold within 0.24 dB gap to the Shannon limits of two different channels simultaneously for a wide range of channel parameters. By practical code construction, finite-length bilayer codes are shown to be able to approach within a 0.6 dB gap to the theoretical decode-and-forward rate of the relay channel at a block length of $10^5$ and a bit-error probability (BER) of $10^{-4}$. Finally, it is demonstrated that a generalized version of the proposed bilayer code construction is applicable to relay networks with multiple relays.Comment: Submitted to IEEE Trans. Info. Theor

V2X Content Distribution Based on Batched Network Coding with Distributed Scheduling

Content distribution is an application in intelligent transportation system to assist vehicles in acquiring information such as digital maps and entertainment materials. In this paper, we consider content distribution from a single roadside infrastructure unit to a group of vehicles passing by it. To combat the short connection time and the lossy channel quality, the downloaded contents need to be further shared among vehicles after the initial broadcasting phase. To this end, we propose a joint infrastructure-to-vehicle (I2V) and vehicle-to-vehicle (V2V) communication scheme based on batched sparse (BATS) coding to minimize the traffic overhead and reduce the total transmission delay. In the I2V phase, the roadside unit (RSU) encodes the original large-size file into a number of batches in a rateless manner, each containing a fixed number of coded packets, and sequentially broadcasts them during the I2V connection time. In the V2V phase, vehicles perform the network coded cooperative sharing by re-encoding the received packets. We propose a utility-based distributed algorithm to efficiently schedule the V2V cooperative transmissions, hence reducing the transmission delay. A closed-form expression for the expected rank distribution of the proposed content distribution scheme is derived, which is used to design the optimal BATS code. The performance of the proposed content distribution scheme is evaluated by extensive simulations that consider multi-lane road and realistic vehicular traffic settings, and shown to significantly outperform the existing content distribution protocols.Comment: 12 pages and 9 figure

Decode-and-Forward Relaying via Standard AWGN Coding and Decoding

A framework is developed for decode-and-forward based relaying using standard coding and decoding that are good for the single-input single-output (SISO) additive white Gaussian noise channel. The framework is applicable to various scenarios and demonstrated for several important cases. Each of these scenarios is transformed into an equivalent Gaussian multiple-input multiple-output (MIMO) common-message broadcast problem, which proves useful even when all links are SISO ones. Over the effective MIMO broadcast channel, a recently developed Gaussian MIMO common-message broadcast scheme is applied. This scheme transforms the MIMO links into a set of parallel SISO channels with no loss of mutual information, using linear pre- and post-processing combined with successive decoding. Over these resulting SISO channels, “off-the-shelf” scalar codes may be used

Performance Analysis of NOMA Multicast Systems Based on Rateless Codes with Delay Constraints

To achieve an efficient and reliable data transmission in time-varying conditions, a novel non-orthogonal multiple access (NOMA) transmission scheme based on rateless codes (NOMA-RC) is proposed in the multicast system in this paper. Using rateless codes at the packet level, the system can generate enough encoded data packets according to users’ requirements to cope with adverse environments. The performance of the NOMA-RC multicast system with delay constraints is analyzed over Rayleigh fading channels. The closed-form expressions for the frame error ratio and the average transmission time are derived for two cases which are a broadcast communication scenario (Scenario 1) and a relay communication scenario (Scenario 2). Under the condition that the quality of service for the edge user is satisfied, an optimization model of power allocation is established to maximize the sum rate. Simulation results show that Scenario 2 can provide better block error ratio performance and exhibit less transmission time than Scenario 1. When compared with orthogonal multiple access (OMA) with rateless codes system, the proposed system can save on the transmission time and improve the system throughput

Buffer-Based Distributed LT Codes

We focus on the design of distributed Luby transform (DLT) codes for erasure networks with multiple sources and multiple relays, communicating to a single destination. The erasure-floor performance of DLT codes improves with the maximum degree of the relay-degree distribution. However, for conventional DLT codes, the maximum degree is upper-bounded by the number of sources. An additional constraint is that the sources are required to have the same information block length. We introduce a $D$-bit buffer for each source-relay link, which allows the relay to select multiple encoded bits from the same source for the relay-encoding process; thus, the number of sources no longer limits the maximum degree at the relay. Furthermore, the introduction of buffers facilitates the use of different information block sizes across sources. Based on density evolution we develop an asymptotic analytical framework for optimization of the relay-degree distribution. We further integrate techniques for unequal erasure protection into the optimization framework. The proposed codes are considered for both lossless and lossy source-relay links. Numerical examples show that there is no loss in erasure performance for transmission over lossy source-relay links as compared to lossless links. Additional delays, however, may occur. The design framework and our contributions are demonstrated by a number of illustrative examples, showing the improvements obtained by the proposed buffer-based DLT codes.Comment: 14 pages, 17 figures, submitte

Precoded Integer-Forcing Universally Achieves the MIMO Capacity to Within a Constant Gap

An open-loop single-user multiple-input multiple-output communication scheme is considered where a transmitter, equipped with multiple antennas, encodes the data into independent streams all taken from the same linear code. The coded streams are then linearly precoded using the encoding matrix of a perfect linear dispersion space-time code. At the receiver side, integer-forcing equalization is applied, followed by standard single-stream decoding. It is shown that this communication architecture achieves the capacity of any Gaussian multiple-input multiple-output channel up to a gap that depends only on the number of transmit antennas.Comment: to appear in the IEEE Transactions on Information Theor