Error probability and capacity analysis of generalised pre-coding aided spatial modulation

The recently proposed multiple input multiple output (MIMO) transmission scheme termed as generalized pre-coding aided spatial modulation (GPSM) is analyzed, where the key idea is that a particular subset of receive antennas is activated and the specific activation pattern itself conveys useful implicit information. We provide the upper bound of both the symbol error ratio (SER) and bit error ratio (BER) expression of the GPSM scheme of a low-complexity decoupled detector. Furthermore, the corresponding discrete-input continuous-output memoryless channel (DCMC) capacity as well as the achievable rate is quantified. Our analytical SER and BER upper bound expressions are confirmed to be tight by our numerical results. We also show that our GPSM scheme constitutes a flexible MIMO arrangement and there is always a beneficial configuration for our GPSM scheme that offers the same bandwidth efficiency as that of its conventional MIMO counterpart at a lower signal to noise ratio (SNR) per bit

Near-capacity MIMOs using iterative detection

In this thesis, Multiple-Input Multiple-Output (MIMO) techniques designed for transmission over narrowband Rayleigh fading channels are investigated. Specifically, in order to providea diversity gain while eliminating the complexity of MIMO channel estimation, a Differential Space-Time Spreading (DSTS) scheme is designed that employs non-coherent detection. Additionally, in order to maximise the coding advantage of DSTS, it is combined with Sphere Packing (SP) modulation. The related capacity analysis shows that the DSTS-SP scheme exhibits a higher capacity than its counterpart dispensing with SP. Furthermore, in order to attain additional performance gains, the DSTS system invokes iterative detection, where the outer code is constituted by a Recursive Systematic Convolutional (RSC) code, while the inner code is a SP demapper in one of the prototype systems investigated, while the other scheme employs a Unity Rate Code (URC) as its inner code in order to eliminate the error floor exhibited by the system dispensing with URC. EXIT charts are used to analyse the convergence behaviour of the iteratively detected schemes and a novel technique is proposed for computing the maximum achievable rate of the system based on EXIT charts. Explicitly, the four-antenna-aided DSTSSP system employing no URC precoding attains a coding gain of 12 dB at a BER of 10-5 and performs within 1.82 dB from the maximum achievable rate limit. By contrast, the URC aidedprecoded system operates within 0.92 dB from the same limit.On the other hand, in order to maximise the DSTS system’s throughput, an adaptive DSTSSP scheme is proposed that exploits the advantages of differential encoding, iterative decoding as well as SP modulation. The achievable integrity and bit rate enhancements of the system are determined by the following factors: the specific MIMO configuration used for transmitting data from the four antennas, the spreading factor used and the RSC encoder’s code rate.Additionally, multi-functional MIMO techniques are designed to provide diversity gains, multiplexing gains and beamforming gains by combining the benefits of space-time codes, VBLASTand beamforming. First, a system employing Nt=4 transmit Antenna Arrays (AA) with LAA number of elements per AA and Nr=4 receive antennas is proposed, which is referred to as a Layered Steered Space-Time Code (LSSTC). Three iteratively detected near-capacity LSSTC-SP receiver structures are proposed, which differ in the number of inner iterations employed between the inner decoder and the SP demapper as well as in the choice of the outer code, which is either an RSC code or an Irregular Convolutional Code (IrCC). The three systems are capable of operating within 0.9, 0.4 and 0.6 dB from the maximum achievable rate limit of the system. A comparison between the three iteratively-detected schemes reveals that a carefully designed two-stage iterative detection scheme is capable of operating sufficiently close to capacity at a lower complexity, when compared to a three-stage system employing a RSC or a two-stage system using an IrCC as an outer code. On the other hand, in order to allow the LSSTC scheme to employ less receive antennas than transmit antennas, while still accommodating multiple users, a Layered Steered Space-Time Spreading (LSSTS) scheme is proposed that combines the benefits of space-time spreading, V-BLAST, beamforming and generalised MC DS-CDMA. Furthermore, iteratively detected LSSTS schemes are presented and an LLR post-processing technique is proposed in order to improve the attainable performance of the iteratively detected LSSTS system.Finally, a distributed turbo coding scheme is proposed that combines the benefits of turbo coding and cooperative communication, where iterative detection is employed by exchanging extrinsic information between the decoders of different single-antenna-aided users. Specifically, the effect of the errors induced in the first phase of cooperation, where the two users exchange their data, on the performance of the uplink in studied, while considering different fading channel characteristics

Enhanced performance and efficiency schemes for generalised spatial modulation.

Doctor of Philosophy in Electronic Engineering. University of KwaZulu-Natal, Durban 2017.Abstract available in PDF file

A Precoding Aided Space Domain Index Modulation Scheme for Downlink Multiuser MIMO Systems

In this correspondence, we propose a space domain index modulation (IM) scheme for the downlink of multiuser multiple-input multiple-output (MU-MIMO) systems. Instead of the most common approach where spatial bits select active receiver antennas, in the presented scheme the spatial information is mapped onto the transmitter side. This allows IM to better exploit large dimensional antenna settings which are typically easier to deploy at the base station. In order to mitigate inter-user interference and allow single user detection, a precoder is adopted at the BS. Furthermore two alternative enhanced signal construction methods are proposed for minimizing the transmitted power or enable an implementation with a reduced number of RF chains. Simulation results for different scenarios show that the proposed approach can be an attractive alternative to conventional precoded MU-MIMO.Comment: submitted to IEEE Transactions on Vehicular Technolog

Iterative signal detection for large scale GSM-MIMO systems

Generalized spatial modulations (GSM) represent a novel multiple input multiple output (MIMO) scheme which can be regarded as a compromise between spatial multiplexing MIMO and conventional spatial modulations (SM), achieving both spectral efficiency (SE) and energy efficiency (EE). Due to the high computational complexity of the maximum likelihood detector (MLD) in large antenna settings and symbol constellations, in this paper we propose a lower complexity iterative suboptimal detector. The derived algorithm comprises a sequence of simple processing steps, namely an unconstrained Euclidean distance minimization problem, an element wise projection over the signal constellation and a projection over the set of valid active antenna combinations. To deal with scenarios where the number of possible active antenna combinations is large, an alternative version of the algorithm which adopts a simpler cardinality projection is also presented. Simulation results show that, compared with other existing approaches, both versions of the proposed algorithm are effective in challenging underdetermined scenarios where the number of receiver antennas is lower than the number of transmitter antennas.info:eu-repo/semantics/acceptedVersio

Precoder and combiner design for generalized spatial modulation based multiuser MIMO systems

Multiple input multiple output (MIMO) schemes based on generalized spatial modulations (GSM) have been widely considered as potential candidate techniques for next-generation wireless networks, as they can improve both spectral and energy efficiency. In this paper we propose a multi-user MIMO system, where a base station transmits precoded GSM symbols to several receivers. In the adopted GSM approach, multiple antennas transmit different high-level QAM symbols simultaneously. The precoder is designed in order to remove interference between users while an iterative algorithm is applied at the receiver to accomplish single-user GSM detection. Simulation results show that the presented GSM MU-MIMO approach is capable to effectively exploit a large number of transmit antennas deployed at the transmitter and also provide performance gains over conventional MU-MIMO schemes with identical spectral efficiencies.info:eu-repo/semantics/acceptedVersio