SysRT: A Modular Multiprocessor RTOS Simulator for Early Design Space Exploration

International audienc

Distributed real-time operating system (DRTOS) modeling in SpecC

System level design of an embedded computing system involves a multi-step process to refine the system from an abstract specification to an actual implementation by defining and modeling the system at various levels of abstraction. System level design supports evaluating and optimizing the system early in design exploration.;Embedded computing systems may consist of multiple processing elements, memories, I/O devices, sensors, and actors. The selection of processing elements includes instruction-set processors and custom hardware units, such as application specific integrated circuit (ASIC) and field programmable gate array (FPGA). Real-time operating systems (RTOS) have been used in embedded systems as an industry standard for years and can offer embedded systems the characteristics such as concurrency and time constraints. Some of the existing system level design languages, such as SpecC, provide the capability to model an embedded system including an RTOS for a single processor. However, there is a need to develop a distributed RTOS modeling mechanism as part of the system level design methodology due to the increasing number of processing elements in systems and to embedded platforms having multiple processors. A distributed RTOS (DRTOS) provides services such as multiprocessor tasks scheduling, interprocess communication, synchronization, and distributed mutual exclusion, etc.;In this thesis, we develop a DRTOS model as the extension of the existing SpecC single RTOS model to provide basic functionalities of a DRTOS implementation, and present the refinement methodology for using our DRTOS model during system level synthesis. The DRTOS model and refinement process are demonstrated in the SpecC SCE environment. The capabilities and limitations of the DRTOS modeling approach are presented

Lightweight asynchronous scheduling in heterogeneous reconfigurable systems

The trend for heterogeneous embedded systems is the integration of accelerators and general-purpose CPU cores on the same die. In these integrated architectures, like the Zynq UltraScale+ board (CPU+FPGA) that we target in this work, hardware support for shared memory and low-overhead synchronization between the accelerator and the CPU cores make the case for exploring strategies that exploit a tight collaboration between the CPUs and the accelerator. In this paper we propose a novel lightweight scheduling strategy, FastFit, targeted to FPGA accelerators, and a new scheduler based on it, named MultiFastFit, which asynchronously tackles heterogeneous systems comprised of a variety of CPU cores and FPGA IPs. Our strategy significantly reduces the overhead to automatically compute the near-optimal chunksizes when compared to a previous state-of-the-art auto-tuned approach, which makes our approach more suitable for fine-grained applications. Additionally, our scheduler MultiFastFit has been designed to enable the efficient co-execution of work among compute devices in such a way that all the devices are busy while minimizing the load unbalance. Our approaches have been evaluated using four benchmarks carefully tuned for the low-power UltraScale+ platform. Our experiments demonstrate that the FastFit strategy always finds the near-optimal FPGA chunksize for any device configuration at a reasonable cost, even for fine-grained and irregular applications, and that heterogeneous CPU+FPGA co-executions that exploit all the compute devices are usually faster and more energy efficient than the CPU-only and FPGA-only executions. We have also compared MultiFastFit with other state-of-the-art scheduling strategies, finding that it outperforms other auto-tuned approach up to 2x and it achieves similar results to manually-tuned schedulers without requiring an offline search of the ideal CPU-FPGA partition or FPGA chunk granularity. © 2022 The Author

Hardware thread management modeling for precision timed processors

Studies recently and currently in progress address timing demands for Cyber Physical Systems (CPS) applications. Certain areas of research seek to modify modern computer architecture to meet the needs of CPS applications. Moreover, specific modifications in current computer architecture have produced newer computer architectures and processors, such as precision timed (PRET) processors. This thesis focuses on identifying, modeling, and simulating thread management methods in hardware used by the current open-source PRET soft processor, the MultiFire

Dynamic time management for improved accuracy and speed in host-compiled multi-core platform models

textWith increasing complexity and software content, modern embedded platforms employ a heterogeneous mix of multi-core processors along with hardware accelerators in order to provide high performance in limited power budgets. Due to complex interactions and highly dynamic behavior, static analysis of real-time performance and other constraints is challenging. As an alternative, full-system simulations have been widely accepted by designers. With traditional approaches being either slow or inaccurate, so-called host-compiled simulators have recently emerged as a solution for rapid evaluation of complete systems at early design stages. In such approaches, a faster simulation is achieved by natively executing application code at the source level, abstracting execution behavior of target platforms, and thus increasing simulation granularity. However, most existing host-compiled simulators often focus on application behavior only while neglecting effects of hardware/software interactions and associated speed and accuracy tradeoffs in platform modeling. In this dissertation, we focus on host-compiled operating system (OS) and processor modeling techniques, and we introduce novel dynamic timing model management approaches that efficiently improve both accuracy and speed of such models via automatically calibrating the simulation granularity. The contributions of this dissertation are twofold: We first establish an infrastructure for efficient host-compiled multi-core platform simulation by developing (a) abstract models of both real-time OSs and processors that replicate timing-accurate hardware/software interactions and enable full-system co-simulation, and (b) quantitative and analytical studies of host-compiled simulation principles to analyze error bounds and investigate possible improvements. Building on this infrastructure, we further propose specific techniques for improving accuracy and speed tradeoffs in host-compiled simulation by developing (c) an automatic timing granularity adjustment technique based on dynamically observing system state to control the simulation, (d) an out-of-order cache hierarchy modeling approach to efficiently reorder memory access behavior in the presence of temporal decoupling, and (e) a synchronized timing model to align platform threads to run efficiently in parallel simulation. Results as applied to industrial-strength platforms confirm that by providing careful abstractions and dynamic timing management, our models can achieve full-system simulations at equivalent speeds of more than a thousand MIPS with less than 3% timing error. Coupled with the capability to easily adjust simulation parameters and configurations, this demonstrates the benefits of our platform models for early application development and exploration.Electrical and Computer Engineerin

Real-time and fault tolerance in distributed control software

Closed loop control systems typically contain multitude of spatially distributed sensors and actuators operated simultaneously. So those systems are parallel and distributed in their essence. But mapping this parallelism onto the given distributed hardware architecture, brings in some additional requirements: safe multithreading, optimal process allocation, real-time scheduling of bus and network resources. Nowadays, fault tolerance methods and fast even online reconfiguration are becoming increasingly important. All those often conflicting requirements, make design and implementation of real-time distributed control systems an extremely difficult task, that requires substantial knowledge in several areas of control and computer science. Although many design methods have been proposed so far, none of them had succeeded to cover all important aspects of the problem at hand. [1] Continuous increase of production in embedded market, makes a simple and natural design methodology for real-time systems needed more then ever