Reusing RTL assertion checkers for verification of SystemC TLM models

The recent trend towards system-level design gives rise to new challenges for reusing existing RTL intellectual properties (IPs) and their verification environment in TLM. While techniques and tools to abstract RTL IPs into TLM models have begun to appear, the problem of reusing, at TLM, a verification environment originally developed for an RTL IP is still under-explored, particularly when ABV is adopted. Some frameworks have been proposed to deal with ABV at TLM, but they assume a top-down design and verification flow, where assertions are defined ex-novo at TLM level. In contrast, the reuse of existing assertions in an RTL-to-TLM bottom-up design flow has not been analyzed yet, except by using transactors to create a mixed simulation between the TLM design and the RTL checkers corresponding to the assertions. However, the use of transactors may lead to longer verification time due to the need of developing and verifying the transactors themselves. Moreover, the simulation time is negatively affected by the presence of transactors, which slow down the simulation at the speed of the slowest parts (i.e., RTL checkers). This article proposes an alternative methodology that does not require transactors for reusing assertions, originally defined for a given RTL IP, in order to verify the corresponding TLM model. Experimental results have been conducted on benchmarks with different characteristics and complexity to show the applicability and the efficacy of the proposed methodology

Integrating RTL IPs into TLM Designs Through Automatic Transactor Generation

Transaction Level Modeling (TLM) is an emerging design practice forovercoming increasing design complexity. It aims at simplifying thedesign flow of embedded systems by designing and verifying a systemat different abstraction levels. In this context, transactors play afundamental role since they allow communication between the systemcomponents, implemented at different abstraction levels. Reuse ofRTL IPs into TLM systems is a meaningful example of key advantageguaranteed by exploiting transactors. Nevertheless, transactorsimplementation is still manual, tedious and error-prone, and the effortspent to verify their correctness often overcomes the benefits of theTLM-based design flow. In this paper we present a methodology toautomatically generate transactors for RTL IPs. We show how thetransactor code can be automatically generated by exploiting thetestbench of any RTL IP

Simulation multi-moteurs multi-niveaux pour la validation des spécifications système et optimisation de la consommation

This work aims at system-level modelling a defined transceiver for Bluetooth Low energy (BLE) system using SystemC-AMS. The goal is to analyze the relationship between the transceiver performance and the accurate energy consumption. This requires the transceiver model contains system-level simulation speed and the low-level design block power consumption and other RF specifications. The Meet-in-the-Middle approach and the Baseband Equivalent method are chosen to achieve the two requirements above. A global simulation of a complete BLE system is achieved by integrating the transceiver model into a SystemC-TLM described BLE system model which contains the higher-than-PHY levels. The simulation is based on a two BLE devices communication system and is run with different BLE use cases. The transceiver Bit-Error-Rate and the energy estimation are obtained at the end of the simulation. First, we modelled and validated each block of a BT transceiver. In front of the prohibitive simulation time, the RF blocks are rewritten by using the BBE methodology, and then refined in order to take into account the non-linearities, which are going to impact the couple consumption, BER. Each circuit (each model) is separately verified, and then a first BLE system simulation (point-to-point between a transmitter and a receiver) has been executed. Finally, the BER is finally estimated. This platform fulfills our expectations, the simulation time is suitable and the results have been validated with the circuit measurement offered by Riviera Waves Company. Finally, two versions of the same transceiver architecture are modelled, simulated and comparedCe travail vise la modélisation au niveau système, en langage SystemC-AMS, et la simulation d'un émetteur-récepteur au standard Bluetooth Low Energy (BLE). L'objectif est d'analyser la relation entre les performances, en termes de BER et la consommation d'énergie du transceiver. Le temps de simulation d’un tel système, à partir de cas d’étude (use case) réaliste, est un facteur clé pour le développement d’une telle plateforme. De plus, afin d’obtenir des résultats de simulation le plus précis possible, les modèles « haut niveau » doivent être raffinés à partir de modèles plus bas niveau où de mesure. L'approche dite Meet-in-the-Middle, associée à la méthode de modélisation équivalente en Bande Base (BBE, BaseBand Equivalent), a été choisie pour atteindre les deux conditions requises, à savoir temps de simulation « faible » et précision des résultats. Une simulation globale d'un système de BLE est obtenue en intégrant le modèle de l'émetteur-récepteur dans une plateforme existante développée en SystemC-TLM. La simulation est basée sur un système de communication de deux dispositifs BLE, en utilisant différents scénarios (différents cas d'utilisation de BLE). Dans un premier temps nous avons modélisé et validé chaque bloc d’un transceiver BT. Devant le temps de simulation prohibitif, les blocs RF sont réécrits en utilisant la méthodologie BB, puis raffinés afin de prendre en compte les non-linéarités qui vont impacter le couple consommation, BER. Chaque circuit (chaque modèle) est vérifié séparément, puis une première simulation système (point à point entre un émetteur et un récepteur) est effectué