Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Cooperation of unmanned systems for agricultural applications: A theoretical framework

Agriculture 4.0 comprises a set of technologies that combines sensors, information systems, enhanced machinery, and informed management with the objective of optimising production by accounting for variabilities and uncertainties within agricultural systems. Autonomous ground and aerial vehicles can lead to favourable improvements in management by performing in-field tasks in a time-effective way. In particular, greater benefits can be achieved by allowing cooperation and collaborative action among unmanned vehicles, both aerial and ground, to perform in-field operations in precise and time-effective ways. In this work, the preliminary and crucial step of analysing and understanding the technical and methodological challenges concerning the main problems involved is performed. An overview of the agricultural scenarios that can benefit from using collaborative machines and the corresponding cooperative schemes typically adopted in this framework are presented. A collection of kinematic and dynamic models for different categories of autonomous aerial and ground vehicles is provided, which represents a crucial step in understanding the vehicles behaviour when full autonomy is desired. Last, a collection of the state-of-the-art technologies for the autonomous guidance of drones is provided, summarising their peculiar characteristics, and highlighting their advantages and shortcomings with a specific focus on the Agriculture 4.0 framework. A companion paper reports the application of some of these techniques in a complete case study in sloped vineyards, applying the proposed multi-phase collaborative scheme introduced here

Real-time control architecture for a multi UAV test bed

The purpose of this thesis is to develop a control architecture running at real-time for a multi unmanned aerial vehicle test bed formed by three AscTec Hummingbird mini quadrotors. The reliable and reconfigurable architecture presented here has a FPGA-based embedded system as main controller. Under the implemented control system, different practical applications have been performed in the MARHES Lab at the University of New Mexico as part of its research in cooperative control of mobile aerial agents. This thesis also covers the quadrotor modeling, the design of a position controller, the real-time architecture implementation and the experimental flight tests. A hybrid approach combining first-principles with system identification techniques is used for modeling the quadrotor due to the lack of information around the structure of the onboard controller designed by AscTec. The complete quadrotor model structure is formed by a black-box subsystem and a point-mass submodel. Experimental data have been gathered for system identification and black-box submodel validation purposes; while the point-mass submodel is found applying rigid-body dynamics. Using the dynamical model, a position control block based in lead-lag and PI compensators is developed and simulated. Improvements in trajectory tracking performance are achieved estimating the linear velocity of the aerial robot and incorporating velocity lead-lag compensators to the control approach. The velocity of the aerial robot is computed by numerical differentiation of position data. Simulation results to a variety of input signals of the control block in cascade with the complete dynamic model of the quadrotor are included. The control block together with the velocity estimation is fully programmed in the embedded controller. A graphical user interface, GUI, as part of the architecture is designed to display real-time data of position and orientation streamed from the motion tracking system as well as to contain useful user controllers. This GUI facilitates that a single operator conducts and oversees all aspects of the different applications where one or multiple quadrotors are used. Experimental tests have helped to tune the control parameters determined by simulation. The performance of the whole architecture has been validated through a variety of practical applications. Autonomous take off, hovering and landing, target surveillance, trajectory tracking and suspended payload transportation are just some of the applications carried out employing the real-time control architecture proposed in this thesis

Modeling, identification and navigation of autonomous air vehicles

The main interest of this work is autonomous navigation of autonomous air vehicles, specifically quadrotor helicopters (quadrocopters), and the focus is on convergence to a target destination with collision avoidance. The controller computes a collision-free path leading to the target position and is based on a navigation function approach and waypoints are followed exploiting PID controller

Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults