113 research outputs found
A Novel System and Image Processing for Improving 3D Ultrasound-guided Interventional Cancer Procedures
Image-guided medical interventions are diagnostic and therapeutic procedures that focus on minimizing surgical incisions for improving disease management and reducing patient burden relative to conventional techniques. Interventional approaches, such as biopsy, brachytherapy, and ablation procedures, have been used in the management of cancer for many anatomical regions, including the prostate and liver. Needles and needle-like tools are often used for achieving planned clinical outcomes, but the increased dependency on accurate targeting, guidance, and verification can limit the widespread adoption and clinical scope of these procedures. Image-guided interventions that incorporate 3D information intraoperatively have been shown to improve the accuracy and feasibility of these procedures, but clinical needs still exist for improving workflow and reducing physician variability with widely applicable cost-conscience approaches. The objective of this thesis was to incorporate 3D ultrasound (US) imaging and image processing methods during image-guided cancer interventions in the prostate and liver to provide accessible, fast, and accurate approaches for clinical improvements.
An automatic 2D-3D transrectal ultrasound (TRUS) registration algorithm was optimized and implemented in a 3D TRUS-guided system to provide continuous prostate motion corrections with sub-millimeter and sub-degree error in 36 ± 4 ms. An automatic and generalizable 3D TRUS prostate segmentation method was developed on a diverse clinical dataset of patient images from biopsy and brachytherapy procedures, resulting in errors at gold standard accuracy with a computation time of 0.62 s. After validation of mechanical and image reconstruction accuracy, a novel 3D US system for focal liver tumor therapy was developed to guide therapy applicators with 4.27 ± 2.47 mm error. The verification of applicators post-insertion motivated the development of a 3D US applicator segmentation approach, which was demonstrated to provide clinically feasible assessments in 0.246 ± 0.007 s. Lastly, a general needle and applicator tool segmentation algorithm was developed to provide accurate intraoperative and real-time insertion feedback for multiple anatomical locations during a variety of clinical interventional procedures. Clinical translation of these developed approaches has the potential to extend the overall patient quality of life and outcomes by improving detection rates and reducing local cancer recurrence in patients with prostate and liver cancer
Current engineering developments for robotic systems in flexible endoscopy
The past four decades have seen an increase in the incidence of early-onset gastrointestinal cancer. Because early-stage cancer detection is vital to reduce mortality rate, mass screening colonoscopy provides the most effective prevention strategy. However, conventional endoscopy is a painful and technically challenging procedure that requires sedation and experienced endoscopists to be performed. To overcome the current limitations, technological innovation is needed in colonoscopy. In recent years, researchers worldwide have worked to enhance the diagnostic and therapeutic capabilities of endoscopes. The new frontier of endoscopic interventions is represented by robotic flexible endoscopy. Among all options, self-propelling soft endoscopes are particularly promising thanks to their dexterity and adaptability to the curvilinear gastrointestinal anatomy. For these devices to replace the standard endoscopes, integration with embedded sensors and advanced surgical navigation technologies must be investigated. In this review, the progress in robotic endoscopy was divided into the fundamental areas of design, sensing, and imaging. The article offers an overview of the most promising advancements on these three topics since 2018. Continuum endoscopes, capsule endoscopes, and add-on endoscopic devices were included, with a focus on fluid-driven, tendon-driven, and magnetic actuation. Sensing methods employed for the shape and force estimation of flexible endoscopes were classified into model- and sensor-based approaches. Finally, some key contributions in molecular imaging technologies, artificial neural networks, and software algorithms are described. Open challenges are discussed to outline a path toward clinical practice for the next generation of endoscopic devices
Volume 12, issue 3
The mission of CJS is to contribute to the effective continuing medical education of Canadian surgical specialists, using innovative techniques when feasible, and to provide surgeons with an effective vehicle for the dissemination of observations in the areas of clinical and basic science research.
Visit the journal website at http://canjsurg.ca/ for more.https://ir.lib.uwo.ca/cjs/1095/thumbnail.jp
Cable-driven parallel mechanisms for minimally invasive robotic surgery
Minimally invasive surgery (MIS) has revolutionised surgery by providing faster recovery times, less post-operative complications, improved cosmesis and reduced pain for the patient. Surgical robotics are used to further decrease the invasiveness of procedures, by using yet smaller and fewer incisions or using natural orifices as entry point. However, many robotic systems still suffer from technical challenges such as sufficient instrument dexterity and payloads, leading to limited adoption in clinical practice. Cable-driven parallel mechanisms (CDPMs) have unique properties, which can be used to overcome existing challenges in surgical robotics. These beneficial properties include high end-effector payloads, efficient force transmission and a large configurable instrument workspace. However, the use of CDPMs in MIS is largely unexplored. This research presents the first structured exploration of CDPMs for MIS and demonstrates the potential of this type of mechanism through the development of multiple prototypes: the ESD CYCLOPS, CDAQS, SIMPLE, neuroCYCLOPS and microCYCLOPS. One key challenge for MIS is the access method used to introduce CDPMs into the body. Three different access methods are presented by the prototypes. By focusing on the minimally invasive access method in which CDPMs are introduced into the body, the thesis provides a framework, which can be used by researchers, engineers and clinicians to identify future opportunities of CDPMs in MIS. Additionally, through user studies and pre-clinical studies, these prototypes demonstrate that this type of mechanism has several key advantages for surgical applications in which haptic feedback, safe automation or a high payload are required. These advantages, combined with the different access methods, demonstrate that CDPMs can have a key role in the advancement of MIS technology.Open Acces
Medical Robotics
The first generation of surgical robots are already being installed in a number of operating rooms around the world. Robotics is being introduced to medicine because it allows for unprecedented control and precision of surgical instruments in minimally invasive procedures. So far, robots have been used to position an endoscope, perform gallbladder surgery and correct gastroesophogeal reflux and heartburn. The ultimate goal of the robotic surgery field is to design a robot that can be used to perform closed-chest, beating-heart surgery. The use of robotics in surgery will expand over the next decades without any doubt. Minimally Invasive Surgery (MIS) is a revolutionary approach in surgery. In MIS, the operation is performed with instruments and viewing equipment inserted into the body through small incisions created by the surgeon, in contrast to open surgery with large incisions. This minimizes surgical trauma and damage to healthy tissue, resulting in shorter patient recovery time. The aim of this book is to provide an overview of the state-of-art, to present new ideas, original results and practical experiences in this expanding area. Nevertheless, many chapters in the book concern advanced research on this growing area. The book provides critical analysis of clinical trials, assessment of the benefits and risks of the application of these technologies. This book is certainly a small sample of the research activity on Medical Robotics going on around the globe as you read it, but it surely covers a good deal of what has been done in the field recently, and as such it works as a valuable source for researchers interested in the involved subjects, whether they are currently “medical roboticists” or not
Evaluation of robotic catheter technology in complex endovascular intervention
The past four decades have witnessed tremendous strides in the evolution of
endovascular devices and techniques. Catheter-based intervention has revolutionized
the management of arterial disease allowing treatment of aortic and peripheral
pathologies via a minimally invasive approach. Despite the exponential advances in
endovascular equipment, devices and techniques, catheter-based endovascular
intervention has certain morphological and technological constraints. Complex patient
anatomy, technological impediments and suboptimal fluoroscopic imaging, can make
endovascular intervention challenging using traditional endovascular means.
Conventional endovascular catheters lack active manoeuvrability of the tip. Manual
control can hinder overall stability and control at key target areas, leading to
significantly prolonged overall procedure and fluoroscopic times. Repeated
instrumentation increases the risk of vessel trauma and distal embolization. More
importantly, guidewire-catheter skills are not necessarily intuitive but must be
developed and are highly dependent on operator skill with long training pathways as a
result.
Recognizing the pressing need to address some of the limitations of standard catheter
technology this thesis aims to evaluate the role of advanced robotic endovascular
catheters in the aortic arch and the visceral segment. Clinical use of this technology is
currently limited to transvenous cardiac mapping and ablation procedures. A
comprehensive pre-clinical comparison and analysis of robotic versus manual catheter
techniques is presented to reveal both their advantages and limitations, with particular emphasis on the potential of robotic catheter technology to reduce the manual skill
required for complex tasks, improve stability at key target areas, reduce the risk of
vessel trauma, embolization and radiation exposure, whilst improving overall operator
performance. The worlds first clinical report of robot-assisted aortic aneurysm repair,
a “proof - of - concept” resulting from this research, is also presented, and the
potential for future advanced applications in order to increase the applicability of
endovascular therapy to a larger cohort of patients discussed
Designing a robotic port system for laparo-endoscopic single-site surgery
Current research and development in the field of surgical interventions aim to reduce the invasiveness by using few incisions or natural orifices in the body to access the surgical site. Considering surgeries in the abdominal cavity, the Laparo-Endoscopic Single-site Surgery (LESS) can be performed through a single incision in the navel, reducing blood loss, post-operative trauma, and improving the cosmetic outcome. However, LESS results in less intuitive instrument control, impaired ergonomic, loss of depth and haptic perception, and restriction of
instrument positioning by a single incision. Robot-assisted surgery addresses these shortcomings, by introducing highly articulated, flexible robotic instruments, ergonomic control consoles with 3D visualization, and intuitive instrument control algorithms. The flexible robotic instruments are usually introduced into the abdomen via a rigid straight port, such that the positioning of the tools and therefore the accessibility of anatomical structures is still constrained by the incision location. To address this limitation, articulated ports for LESS are proposed by recent research works. However, they focus on only a few aspects, which are relevant to the surgery, such that a design considering all requirements for LESS has not been
proposed yet. This partially originates in the lack of anatomical data of specific applications. Further, no general design guidelines exist and only a few evaluation metrics are proposed. To target these challenges, this thesis focuses on the design of an articulated robotic port for LESS partial nephrectomy. A novel approach is introduced, acquiring the available abdominal workspace, integrated into the surgical workflow. Based on several generated patient datasets and developed metrics, design parameter optimization is conducted. Analyzing the surgical
procedure, a comprehensive requirement list is established and applied to design a robotic system, proposing a tendon-driven continuum robot as the articulated port structure. Especially, the aspects of stiffening and sterile design are addressed. In various experimental evaluations, the reachability, the stiffness, and the overall design are evaluated. The findings identify layer jamming as the superior stiffening method. Further, the articulated port is proven to enhance the accessibility of anatomical structures and offer a patient and incision location independent
design
METHODOLOGY FOR RESEARCH AND DEVELOPMENT OF NOVEL MEDICAL DEVICES FOR MINIMALLY INVASIVE INTERVENTIONS
The design of innovative medical device requires extensive and hard efforts to reach good results in terms of safety, efficacy and cost effectiveness. First of all the idea has to be set and a wide search of state of the art, both technological and academic, has to be developed. Then the materials, manufacturing processes and design constraints have to be understood. In this work three examples of innovative surgical devices for minimally invasive surgery and assistance have been presented.
The Muneretto Beam catheter is a new device for atrial defibrillation. Starting from a catheter produced by Estech company for the treatment of atrial fibrillation by ablating cardiac tissue during surgery, a system for the magnetic guidance of the same has been implemented. Thanks to finite element analysis of various configurations of magnets and to several in vitro tests, a final configuration which allows a good balance between the sliding of the catheter on the tissues and the magnetic interaction and adhesion to tissues has been found. Further attention has been taken to the development of the cover and the right configuration and method of use of the device.
The VideoDrain system is a new catheter for the monitoring of post-operative wound. After critical surgical procedures it is necessary to monitor the status of the surgical wound for avoiding second look surgical interventions. Therefore a new balloon catheter for allowing the vision of the abdominal cavity has been produced. Several in vitro and in vivo trials have been conducted and the device is at the pre-industrial stage.
The FloSeal GI cath. is a new device for the gastrointestinal release of an haemostatic substance of the Baxter company: the Floseal thrombin matrix. It consists in a balloon catheter suited for the use in the lower and upper gastrointestinal tract in the occurrence of bleedings during endoscopic procedures. This device has been CE labelled and is now on the market.
All the devices described in this work come from ideas of surgeons leader in innovation in the field of minimally invasive interventions. Their collaboration has been fundamental for the several phases of design and tests of the devices.
This Ph.D. thesis is divided into five chapters. In the Introduction chapter the process of research and development of innovative MDs for minimally invasive surgery has been illustrated. The second chapter shows the efforts done to find a working configuration for the Muneretto Beam catheter and the subsequent first prototypes developed. The progress in the design of VideoDrain has been explained in the third chapter; the whole process goes from the idea to the animal test on prototypes and a preliminary risk analysis. The development of the Floseal GI Catheter is depicted in the fourth chapter; all the details of the materials used and tests done to ensure a CE mark have been reported. Finally, in the Conclusion chapter I have reported some lessons learned from the work in the field of MDs, as a student, researcher and engineer at close contact with the world of surgery and minimally invasive technologies. Some papers about a preliminary research activity in the field of minimally invasive surgery and robotic interventions have been also enclosed. These works have been very useful to start the understanding of the complex and amazing world of MIS
- …