52,420 research outputs found
MIMO radar space–time adaptive processing using prolate spheroidal wave functions
In the traditional transmitting beamforming radar system, the transmitting antennas send coherent waveforms which form a highly focused beam. In the multiple-input multiple-output (MIMO) radar system, the transmitter sends noncoherent (possibly orthogonal) broad (possibly omnidirectional) waveforms. These waveforms can be extracted at the receiver by a matched filterbank. The extracted signals can be used to obtain more diversity or to improve the spatial resolution for clutter. This paper focuses on space–time adaptive processing (STAP) for MIMO radar systems which improves the spatial resolution for clutter. With a slight modification, STAP methods developed originally for the single-input multiple-output (SIMO) radar (conventional radar) can also be used in MIMO radar. However, in the MIMO radar, the rank of the jammer-and-clutter subspace becomes very large, especially the jammer subspace. It affects both the complexity and the convergence of the STAP algorithm. In this paper, the clutter space and its rank in the MIMO radar are explored. By using the geometry of the problem rather than data, the clutter subspace can be represented using prolate spheroidal wave functions (PSWF). A new STAP algorithm is also proposed. It computes the clutter space using the PSWF and utilizes the block-diagonal property of the jammer covariance matrix. Because of fully utilizing the geometry and the structure of the covariance matrix, the method has very good SINR performance and low computational complexity
Achieving Large Multiplexing Gain in Distributed Antenna Systems via Cooperation with pCell Technology
In this paper we present pCellTM technology, the first commercial-grade
wireless system that employs cooperation between distributed transceiver
stations to create concurrent data links to multiple users in the same
spectrum. First we analyze the per-user signal-to-interference-plus-noise ratio
(SINR) employing a geometrical spatial channel model to define volumes in space
of coherent signal around user antennas (or personal cells, i.e., pCells). Then
we describe the system architecture consisting of a general-purpose-processor
(GPP) based software-defined radio (SDR) wireless platform implementing a
real-time LTE protocol stack to communicate with off-the-shelf LTE devices.
Finally we present experimental results demonstrating up to 16 concurrent
spatial channels for an aggregate average spectral efficiency of 59.3 bps/Hz in
the downlink and 27.5 bps/Hz in the uplink, providing data rates of 200 Mbps
downlink and 25 Mbps uplink in 5 MHz of TDD spectrum.Comment: IEEE Asilomar Conference on Signals, Systems, and Computers, Nov.
8-11th 2015, Pacific Grove, CA, US
Massive MIMO-based Localization and Mapping Exploiting Phase Information of Multipath Components
In this paper, we present a robust multipath-based localization and mapping
framework that exploits the phases of specular multipath components (MPCs)
using a massive multiple-input multiple-output (MIMO) array at the base
station. Utilizing the phase information related to the propagation distances
of the MPCs enables the possibility of localization with extraordinary accuracy
even with limited bandwidth. The specular MPC parameters along with the
parameters of the noise and the dense multipath component (DMC) are tracked
using an extended Kalman filter (EKF), which enables to preserve the
distance-related phase changes of the MPC complex amplitudes. The DMC comprises
all non-resolvable MPCs, which occur due to finite measurement aperture. The
estimation of the DMC parameters enhances the estimation quality of the
specular MPCs and therefore also the quality of localization and mapping. The
estimated MPC propagation distances are subsequently used as input to a
distance-based localization and mapping algorithm. This algorithm does not need
prior knowledge about the surrounding environment and base station position.
The performance is demonstrated with real radio-channel measurements using an
antenna array with 128 ports at the base station side and a standard cellular
signal bandwidth of 40 MHz. The results show that high accuracy localization is
possible even with such a low bandwidth.Comment: 14 pages (two columns), 13 figures. This work has been submitted to
the IEEE Transaction on Wireless Communications for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
Scaling up MIMO: Opportunities and Challenges with Very Large Arrays
This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an
order of magnitude more elements than in systems being built today, say a
hundred antennas or more. Very large MIMO entails an unprecedented number of
antennas simultaneously serving a much smaller number of terminals. The
disparity in number emerges as a desirable operating condition and a practical
one as well. The number of terminals that can be simultaneously served is
limited, not by the number of antennas, but rather by our inability to acquire
channel-state information for an unlimited number of terminals. Larger numbers
of terminals can always be accommodated by combining very large MIMO technology
with conventional time- and frequency-division multiplexing via OFDM. Very
large MIMO arrays is a new research field both in communication theory,
propagation, and electronics and represents a paradigm shift in the way of
thinking both with regards to theory, systems and implementation. The ultimate
vision of very large MIMO systems is that the antenna array would consist of
small active antenna units, plugged into an (optical) fieldbus.Comment: Accepted for publication in the IEEE Signal Processing Magazine,
October 201
Principal component analysis and perturbation theory–based robust damage detection of multifunctional aircraft structure
A fundamental problem in structural damage detection is to define an efficient feature to calculate a damage index. Furthermore, due to perturbations from various sources, we also need to define a rigorous threshold whose overtaking indicates the presence of damages. In this article, we develop a robust damage detection methodology based on principal component analysis. We first present an original damage index based on projection of the separation matrix, and then, we drive a novel adaptive threshold that does not rely on statistical assumptions. This threshold is analytic, and it is based on matrix perturbation theory. The efficiency of the method is illustrated using simulations of a composite smart structure and experimental results performed on a conformal load-bearing antenna structure laboratory test
High-Rate Space Coding for Reconfigurable 2x2 Millimeter-Wave MIMO Systems
Millimeter-wave links are of a line-of-sight nature. Hence, multiple-input
multiple-output (MIMO) systems operating in the millimeter-wave band may not
achieve full spatial diversity or multiplexing. In this paper, we utilize
reconfigurable antennas and the high antenna directivity in the millimeter-wave
band to propose a rate-two space coding design for 2x2 MIMO systems. The
proposed scheme can be decoded with a low complexity maximum-likelihood
detector at the receiver and yet it can enhance the bit-error-rate performance
of millimeter-wave systems compared to traditional spatial multiplexing
schemes, such as the Vertical Bell Laboratories Layered Space-Time Architecture
(VBLAST). Using numerical simulations, we demonstrate the efficiency of the
proposed code and show its superiority compared to existing rate-two space-time
block codes
- …