Secondary techniques for increasing fault coverage of fault detection test sequences for asynchronous sequential networks

The generation of fault detection sequences for asynchronous sequential networks is considered here. Several techniques exist for the generation of fault detection sequences on combinational and clocked sequential networks. Although these techniques provide closed solutions for combinational and clocked networks, they meet with much less success when used as strategies on asynchronous networks. It is presently assumed that the general asynchronous problem defies closed solution. For this reason, a secondary procedure is presented here to facilitate increased fault coverage by a given fault detection test sequence. This procedure is successful on all types of logic networks but is, perhaps, most useful in the asynchronous case since this is the problem on which other techniques fail. The secondary procedure has been designed to improve the fault coverage accomplished by any fault detection sequence regardless of the origin of the sequence. The increased coverage is accomplished by a minimum amount of additional internal hardware and/or a minimum of additional package outputs. The procedure presented here will function as part of an overall digital fault detection system, which will be composed of: 1) a compatible digital logic simulator, 2) a set of fault detection sequence generators, 3) secondary procedures for increasing fault coverage, 4) procedures to allow for diagnosis to a variable level. This research is directed at presenting a complete solution to the problems involved with developing secondary procedures for increasing the fault coverage of fault detection sequences --Abstract, pages ii-iii

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Investigations into the feasibility of an on-line test methodology

This thesis aims to understand how information coding and the protocol that it supports can affect the characteristics of electronic circuits. More specifically, it investigates an on-line test methodology called IFIS (If it Fails It Stops) and its impact on the design, implementation and subsequent characteristics of circuits intended for application specific lC (ASIC) technology. The first study investigates the influences of information coding and protocol on the characteristics of IFIS systems. The second study investigates methods of circuit design applicable to IFIS cells and identifies the· technique possessing the characteristics most suitable for on-line testing. The third study investigates the characteristics of a 'real-life' commercial UART re-engineered using the techniques resulting from the previous two studies. The final study investigates the effects of the halting properties endowed by the protocol on failure diagnosis within IFIS systems. The outcome of this work is an identification and characterisation of the factors that influence behaviour, implementation costs and the ability to test and diagnose IFIS designs

New Techniques to Reduce the Execution Time of Functional Test Programs

The compaction of test programs for processor-based systems is of utmost practical importance: Software-Based Self-Test (SBST) is nowadays increasingly adopted, especially for in-field test of safety-critical applications, and both the size and the execution time of the test are critical parameters. However, while compacting the size of binary test sequences has been thoroughly studied over the years, the reduction of the execution time of test programs is still a rather unexplored area of research. This paper describes a family of algorithms able to automatically enhance an existing test program, reducing the time required to run it and, as a side effect, its size. The proposed solutions are based on instruction removal and restoration, which is shown to be computationally more efficient than instruction removal alone. Experimental results demonstrate the compaction capabilities, and allow analyzing computational costs and effectiveness of the different algorithms

Static Compaction of Test Sequences for Synchronous Sequential Circuits

Today, VLSI design has progressed to a stage where it needs to incorporate methods of testing circuits. The Automatic Test Pattern Generation (ATPG) is a very attractive method and feasible on almost any combinational and sequential circuit. Currently available automatic test pattern generators (ATPGs) generate test sets that may be excessively long. Because a cost of testing depends on the test length. compaction techniques have been used to reduce that length. The motivation for studying test compaction is twofold. Firstly, by reducing the test sequence length. the memory requirements during the test application and the test application time are reduced. Secondly, the extent of test compaction possible for deterministic test sequences indicates that test pattern generators spend a significant amount of time generating test vectors that are not necessary. The compacted test sequences provide a target for more efficient deterministic test generators. Two types of compaction techniques exist: dynamic and static. The dynamic test sequence compaction performs compaction concurrently with the test generation process and often requires modification of the test generator. The static test sequence compaction is done in a post-processing step to the test generation and is independent of the test generation algorithm and process. In the thesis, a new idea for static compaction of test sequences for synchronous sequential circuits has been proposed. Our new method - SUSEM (Set Up Sequence Elimination Method) uses the circuit state information to eliminate some setup sequences for the target faults and consequently reduce the test sequence length. The technique has been used for the test sequences generated by HITEC test generator. ISCAS89 benchmark circuits were used in our experiments, for some circuits which have a large number of target faults and relatively small number of flip-flops, the very significant compactions have been obtained. The more important is that this method can be used to improve the test generation procedure unlike most static compaction methods which blindly or randomly remove parts of test vectors and cannot be used to improve the test generators

Cost modelling and concurrent engineering for testable design

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.As integrated circuits and printed circuit boards increase in complexity, testing becomes a major cost factor of the design and production of the complex devices. Testability has to be considered during the design of complex electronic systems, and automatic test systems have to be used in order to facilitate the test. This fact is now widely accepted in industry. Both design for testability and the usage of automatic test systems aim at reducing the cost of production testing or, sometimes, making it possible at all. Many design for testability methods and test systems are available which can be configured into a production test strategy, in order to achieve high quality of the final product. The designer has to select from the various options for creating a test strategy, by maximising the quality and minimising the total cost for the electronic system. This thesis presents a methodology for test strategy generation which is based on consideration of the economics during the life cycle of the electronic system. This methodology is a concurrent engineering approach which takes into account all effects of a test strategy on the electronic system during its life cycle by evaluating its related cost. This objective methodology is used in an original test strategy planning advisory system, which allows for test strategy planning for VLSI circuits as well as for digital electronic systems. The cost models which are used for evaluating the economics of test strategies are described in detail and the test strategy planning system is presented. A methodology for making decisions which are based on estimated costing data is presented. Results of using the cost models and the test strategy planning system for evaluating the economics of test strategies for selected industrial designs are presented

Test and Testability of Asynchronous Circuits

The ever-increasing transistor shrinkage and higher clock frequencies are causing serious clock distribution, power management, and reliability issues. Asynchronous design is predicted to have a significant role in tackling these challenges because of its distributed control mechanism and on-demand, rather than continuous, switching activity. Null Convention Logic (NCL) is a robust and low-power asynchronous paradigm that introduces new challenges to test and testability algorithms because 1) the lack of deterministic timing in NCL complicates the management of test timing, 2) all NCL gates are state-holding and even simple combinational circuits show sequential behaviour, and 3) stuck-at faults on gate internal feedback (GIF) of NCL gates do not always cause an incorrect output and therefore are undetectable by automatic test pattern generation (ATPG) algorithms. Existing test methods for NCL use clocked hardware to control the timing of test. Such test hardware could introduce metastability issues into otherwise highly robust NCL devices. Also, existing test techniques for NCL handle the high-statefulness of NCL circuits by excessive incorporation of test hardware which imposes additional area, propagation delay and power consumption. This work, first, proposes a clockless self-timed ATPG that detects all faults on the gate inputs and a share of the GIF faults with no added design for test (DFT). Then, the efficacy of quiescent current (IDDQ) test for detecting GIF faults undetectable by a DFT-less ATPG is investigated. Finally, asynchronous test hardware, including test points, a scan cell, and an interleaved scan architecture, is proposed for NCL-based circuits. To the extent of our knowledge, this is the first work that develops clockless, self-timed test techniques for NCL while minimising the need for DFT, and also the first work conducted on IDDQ test of NCL. The proposed methods are applied to multiple NCL circuits with up to 2,633 NCL gates (10,000 CMOS Boolean gates), in 180 and 45 nm technologies and show average fault coverage of 88.98% for ATPG alone, 98.52% including IDDQ test, and 99.28% when incorporating test hardware. Given that this fault coverage includes detection of GIF faults, our work has 13% higher fault coverage than previous work. Also, because our proposed clockless test hardware eliminates the need for double-latching, it reduces the average area and delay overhead of previous studies by 32% and 50%, respectively

A Lightweight N-Cover Algorithm For Diagnostic Fail Data Minimization

The increasing design complexity of modern ICs has made it extremely difficult and expensive to test them comprehensively. As the transistor count and density of circuits increase, a large volume of fail data is collected by the tester for a single failing IC. The diagnosis procedure analyzes this fail data to give valuable information about the possible defects that may have caused the circuit to fail. However, without any feedback from the diagnosis procedure, the tester may often collect fail data which is potentially not useful for identifying the defects in the failing circuit. This not only consumes tester memory but also increases tester data logging time and diagnosis run time. In this work, we present an algorithm to minimize the amount of fail data used for high quality diagnosis of the failing ICs. The developed algorithm analyzes outputs at which the tests failed and determines which failing tests can be eliminated from the fail data without compromising diagnosis accuracy. The proposed algorithm is used as a preprocessing step between the tester data logs and the diagnosis procedure. The performance of the algorithm was evaluated using fail data from industry manufactured ICs. Experiments demonstrate that on average, 43% of fail data was eliminated by our algorithm while maintaining an average diagnosis accuracy of 93%. With this reduction in fail data, the diagnosis speed was also increased by 46%

Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network