Optimisation of Mobile Communication Networks - OMCO NET

The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University. The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing

On the Development of Distributed Estimation Techniques for Wireless Sensor Networks

Wireless sensor networks (WSNs) have lately witnessed tremendous demand, as evidenced by the increasing number of day-to-day applications. The sensor nodes aim at estimating the parameters of their corresponding adaptive filters to achieve the desired response for the event of interest. Some of the burning issues related to linear parameter estimation in WSNs have been addressed in this thesis mainly focusing on reduction of communication overhead and latency, and robustness to noise. The first issue deals with the high communication overhead and latency in distributed parameter estimation techniques such as diffusion least mean squares (DLMS) and incremental least mean squares (ILMS) algorithms. Subsequently the poor performance demonstrated by these distributed techniques in presence of impulsive noise has been dealt separately. The issue of source localization i.e. estimation of source bearing in WSNs, where the existing decentralized algorithms fail to perform satisfactorily, has been resolved in this thesis. Further the same issue has been dealt separately independent of nodal connectivity in WSNs. This thesis proposes two algorithms namely the block diffusion least mean squares (BDLMS) and block incremental least mean squares (BILMS) algorithms for reducing the communication overhead in WSNs. The theoretical and simulation studies demonstrate that BDLMS and BILMS algorithms provide the same performances as that of DLMS and ILMS, but with significant reduction in communication overheads per node. The latency also reduces by a factor as high as the block-size used in the proposed algorithms. With an aim to develop robustness towards impulsive noise, this thesis proposes three robust distributed algorithms i.e. saturation nonlinearity incremental LMS (SNILMS), saturation nonlinearity diffusion LMS (SNDLMS) and Wilcoxon norm diffusion LMS (WNDLMS) algorithms. The steady-state analysis of SNILMS algorithm is carried out based on spatial-temporal energy conservation principle. The theoretical and simulation results show that these algorithms are robust to impulsive noise. The SNDLMS algorithm is found to provide better performance than SNILMS and WNDLMS algorithms. In order to develop a distributed source localization technique, a novel diffusion maximum likelihood (ML) bearing estimation algorithm is proposed in this thesis which needs less communication overhead than the centralized algorithms. After forming a random array with its neighbours, each sensor node estimates the source bearing by optimizing the ML function locally using a diffusion particle swarm optimization algorithm. The simulation results show that the proposed algorithm performs better than the centralized multiple signal classification (MUSIC) algorithm in terms of probability of resolution and root mean square error. Further, in order to make the proposed algorithm independent of nodal connectivity, a distributed in-cluster bearing estimation technique is proposed. Each cluster of sensors estimates the source bearing by optimizing the ML function locally in cooperation with other clusters. The simulation results demonstrate improved performance of the proposed method in comparison to the centralized and decentralized MUSIC algorithms, and the distributed in-network algorith

A Study on Intrusion Detection System in Wireless Sensor Networks

The technology of Wireless Sensor Networks (WSNs) has become most significant in present day. WSNs are extensively used in applications like military, industry, health, smart homes and smart cities. All the applications of WSN require secure communication between the sensor nodes and the base station. Adversary compromises at the sensor nodes to introduce different attacks into WSN. Hence, suitable Intrusion Detection System (IDS) is essential in WSN to defend against the security attack. IDS approaches for WSN are classified based on the mechanism used to detect the attacks. In this paper, we present the taxonomy of security attacks, different IDS mechanisms for detecting attacks and performance metrics used to assess the IDS algorithm for WSNs. Future research directions on IDS in WSN are also discussed

Fully Connected Neural Networks Ensemble with Signal Strength Clustering for Indoor Localization in Wireless Sensor Networks

The paper introduces a method which improves localization accuracy of the signal strength fingerprinting approach. According to the proposed method, entire localization area is divided into regions by clustering the fingerprint database. For each region a prototype of the received signal strength is determined and a dedicated artificial neural network (ANN) is trained by using only those fingerprints that belong to this region (cluster). Final estimation of the location is obtained by fusion of the coordinates delivered by selected ANNs. Sensor nodes have to store only the signal strength prototypes and synaptic weights of the ANNs in order to estimate their locations. This approach significantly reduces the amount of memory required to store a received signal strength map. Various ANN topologies were considered in this study. Improvement of the localization accuracy as well as speed-up of learning process was achieved by employing fully connected neural networks. The proposed method was verified and compared against state-of-the-art localization approaches in realworld indoor environment by using both stationary andmobile sensor nodes

Mitigating Denial of Service Attacks in Fog-Based Wireless Sensor Networks Using Machine Learning Techniques

Wireless sensor networks are considered to be among the most significant and innovative technologies in the 21st century due to their wide range of industrial applications. Sensor nodes in these networks are susceptible to a variety of assaults due to their special qualities and method of deployment. In WSNs, denial of service attacks are common attacks in sensor networks. It is difficult to design a detection and prevention system that would effectively reduce the impact of these attacks on WSNs. In order to identify assaults on WSNs, this study suggests using two machine learning models: decision trees and XGBoost. The WSNs dataset was the subject of extensive tests to identify denial of service attacks. The experimental findings demonstrate that the XGBoost model, when applied to the entire dataset, has a higher true positive rate (98.3%) than the Decision tree approach (97.3%) and a lower false positive rate (1.7%) than the Decision tree technique (2.7%). Like this, with selected dataset assaults, the XGBoost approach has a higher true positive rate (99.01%) than the Decision tree technique (97.50%) and a lower false positive rate (0.99%) than the Decision tree technique (2.50%)

Implement DNN technology by using wireless sensor network system based on IOT applications

The smart Internet of Things-based system suggested in this research intends to increase network and application accuracy by controlling and monitoring the network. This is a deep learning network. The invisible layer's structure permits it to learn more. Improved quality of service supplied by each sensor node thanks to element-modified deep learning and network buffer capacity management. A customized deep learning technique can be used to train a system that can focus better on tasks. The researchers were able to implement wireless sensor calculations with 98.68 percent precision and the fastest execution time. With a sensor-based system and a short execution time, this article detects and classifies the proxy with 99.21 percent accuracy. However, we were able to accurately detect and classify intrusions and real-time proxy types in this study, which is a significant improvement over previous research

IoT and Sensor Networks in Industry and Society

The exponential progress of Information and Communication Technology (ICT) is one of the main elements that fueled the acceleration of the globalization pace. Internet of Things (IoT), Artificial Intelligence (AI) and big data analytics are some of the key players of the digital transformation that is affecting every aspect of human's daily life, from environmental monitoring to healthcare systems, from production processes to social interactions. In less than 20 years, people's everyday life has been revolutionized, and concepts such as Smart Home, Smart Grid and Smart City have become familiar also to non-technical users. The integration of embedded systems, ubiquitous Internet access, and Machine-to-Machine (M2M) communications have paved the way for paradigms such as IoT and Cyber Physical Systems (CPS) to be also introduced in high-requirement environments such as those related to industrial processes, under the forms of Industrial Internet of Things (IIoT or I2oT) and Cyber-Physical Production Systems (CPPS). As a consequence, in 2011 the German High-Tech Strategy 2020 Action Plan for Germany first envisioned the concept of Industry 4.0, which is rapidly reshaping traditional industrial processes. The term refers to the promise to be the fourth industrial revolution. Indeed, the first industrial revolution was triggered by water and steam power. Electricity and assembly lines enabled mass production in the second industrial revolution. In the third industrial revolution, the introduction of control automation and Programmable Logic Controllers (PLCs) gave a boost to factory production. As opposed to the previous revolutions, Industry 4.0 takes advantage of Internet access, M2M communications, and deep learning not only to improve production efficiency but also to enable the so-called mass customization, i.e. the mass production of personalized products by means of modularized product design and flexible processes. Less than five years later, in January 2016, the Japanese 5th Science and Technology Basic Plan took a further step by introducing the concept of Super Smart Society or Society 5.0. According to this vision, in the upcoming future, scientific and technological innovation will guide our society into the next social revolution after the hunter-gatherer, agrarian, industrial, and information eras, which respectively represented the previous social revolutions. Society 5.0 is a human-centered society that fosters the simultaneous achievement of economic, environmental and social objectives, to ensure a high quality of life to all citizens. This information-enabled revolution aims to tackle today’s major challenges such as an ageing population, social inequalities, depopulation and constraints related to energy and the environment. Accordingly, the citizens will be experiencing impressive transformations into every aspect of their daily lives. This book offers an insight into the key technologies that are going to shape the future of industry and society. It is subdivided into five parts: the I Part presents a horizontal view of the main enabling technologies, whereas the II-V Parts offer a vertical perspective on four different environments. The I Part, dedicated to IoT and Sensor Network architectures, encompasses three Chapters. In Chapter 1, Peruzzi and Pozzebon analyse the literature on the subject of energy harvesting solutions for IoT monitoring systems and architectures based on Low-Power Wireless Area Networks (LPWAN). The Chapter does not limit the discussion to Long Range Wise Area Network (LoRaWAN), SigFox and Narrowband-IoT (NB-IoT) communication protocols, but it also includes other relevant solutions such as DASH7 and Long Term Evolution MAchine Type Communication (LTE-M). In Chapter 2, Hussein et al. discuss the development of an Internet of Things message protocol that supports multi-topic messaging. The Chapter further presents the implementation of a platform, which integrates the proposed communication protocol, based on Real Time Operating System. In Chapter 3, Li et al. investigate the heterogeneous task scheduling problem for data-intensive scenarios, to reduce the global task execution time, and consequently reducing data centers' energy consumption. The proposed approach aims to maximize the efficiency by comparing the cost between remote task execution and data migration. The II Part is dedicated to Industry 4.0, and includes two Chapters. In Chapter 4, Grecuccio et al. propose a solution to integrate IoT devices by leveraging a blockchain-enabled gateway based on Ethereum, so that they do not need to rely on centralized intermediaries and third-party services. As it is better explained in the paper, where the performance is evaluated in a food-chain traceability application, this solution is particularly beneficial in Industry 4.0 domains. Chapter 5, by De Fazio et al., addresses the issue of safety in workplaces by presenting a smart garment that integrates several low-power sensors to monitor environmental and biophysical parameters. This enables the detection of dangerous situations, so as to prevent or at least reduce the consequences of workers accidents. The III Part is made of two Chapters based on the topic of Smart Buildings. In Chapter 6, Petroșanu et al. review the literature about recent developments in the smart building sector, related to the use of supervised and unsupervised machine learning models of sensory data. The Chapter poses particular attention on enhanced sensing, energy efficiency, and optimal building management. In Chapter 7, Oh examines how much the education of prosumers about their energy consumption habits affects power consumption reduction and encourages energy conservation, sustainable living, and behavioral change, in residential environments. In this Chapter, energy consumption monitoring is made possible thanks to the use of smart plugs. Smart Transport is the subject of the IV Part, including three Chapters. In Chapter 8, Roveri et al. propose an approach that leverages the small world theory to control swarms of vehicles connected through Vehicle-to-Vehicle (V2V) communication protocols. Indeed, considering a queue dominated by short-range car-following dynamics, the Chapter demonstrates that safety and security are increased by the introduction of a few selected random long-range communications. In Chapter 9, Nitti et al. present a real time system to observe and analyze public transport passengers' mobility by tracking them throughout their journey on public transport vehicles. The system is based on the detection of the active Wi-Fi interfaces, through the analysis of Wi-Fi probe requests. In Chapter 10, Miler et al. discuss the development of a tool for the analysis and comparison of efficiency indicated by the integrated IT systems in the operational activities undertaken by Road Transport Enterprises (RTEs). The authors of this Chapter further provide a holistic evaluation of efficiency of telematics systems in RTE operational management. The book ends with the two Chapters of the V Part on Smart Environmental Monitoring. In Chapter 11, He et al. propose a Sea Surface Temperature Prediction (SSTP) model based on time-series similarity measure, multiple pattern learning and parameter optimization. In this strategy, the optimal parameters are determined by means of an improved Particle Swarm Optimization method. In Chapter 12, Tsipis et al. present a low-cost, WSN-based IoT system that seamlessly embeds a three-layered cloud/fog computing architecture, suitable for facilitating smart agricultural applications, especially those related to wildfire monitoring. We wish to thank all the authors that contributed to this book for their efforts. We express our gratitude to all reviewers for the volunteering support and precious feedback during the review process. We hope that this book provides valuable information and spurs meaningful discussion among researchers, engineers, businesspeople, and other experts about the role of new technologies into industry and society

FCS-MBFLEACH: Designing an Energy-Aware Fault Detection System for Mobile Wireless Sensor Networks

Wireless sensor networks (WSNs) include large-scale sensor nodes that are densely distributed over a geographical region that is completely randomized for monitoring, identifying, and analyzing physical events. The crucial challenge in wireless sensor networks is the very high dependence of the sensor nodes on limited battery power to exchange information wirelessly as well as the non-rechargeable battery of the wireless sensor nodes, which makes the management and monitoring of these nodes in terms of abnormal changes very difficult. These anomalies appear under faults, including hardware, software, anomalies, and attacks by raiders, all of which affect the comprehensiveness of the data collected by wireless sensor networks. Hence, a crucial contraption should be taken to detect the early faults in the network, despite the limitations of the sensor nodes. Machine learning methods include solutions that can be used to detect the sensor node faults in the network. The purpose of this study is to use several classification methods to compute the fault detection accuracy with different densities under two scenarios in regions of interest such as MB-FLEACH, one-class support vector machine (SVM), fuzzy one-class, or a combination of SVM and FCS-MBFLEACH methods. It should be noted that in the study so far, no super cluster head (SCH) selection has been performed to detect node faults in the network. The simulation outcomes demonstrate that the FCS-MBFLEACH method has the best performance in terms of the accuracy of fault detection, false-positive rate (FPR), average remaining energy, and network lifetime compared to other classification methods

Emerging Routing Method Using Path Arbitrator in Web Sensor Networks

Sophisticated Routing has a big impact on wireless sensor network performance and data delivery. Because nodes join and leave the network on a whim, routing in WSN is not as simple a task as it is throughout sensor networks that are wireless. The fact that the most of WSN devices are resource constrained is another restriction on how routing is implemented in WSN. The WSN uses a variety of routing protocols. However, the primary goal of this research is to determine the best route from the source to the destination using wireless sensor networks and machine learning techniques Which is Particle Swarm Optimization. In this study, an innovative and intelligent machine dubbed the Path Arbitrator or selector, which will store all sensor data and use machine learning methods, is used to develop a new routing mechanism