310 research outputs found
Recommended from our members
Improving River Flood Extent Delineation From Synthetic Aperture Radar Using Airborne Laser Altimetry
The agricultural impact of the 2015–2016 floods in Ireland as mapped through Sentinel 1 satellite imagery
peer-reviewedIrish Journal of Agricultural and Food Research | Volume 58: Issue 1
The agricultural impact of the 2015–2016 floods in Ireland as mapped through Sentinel 1 satellite imagery
R. O’Haraemail
, S. Green
and T. McCarthy
DOI: https://doi.org/10.2478/ijafr-2019-0006 | Published online: 11 Oct 2019
PDF
Abstract
Article
PDF
References
Recommendations
Abstract
The capability of Sentinel 1 C-band (5 cm wavelength) synthetic aperture radio detection and ranging (RADAR) (abbreviated as SAR) for flood mapping is demonstrated, and this approach is used to map the extent of the extensive floods that occurred throughout the Republic of Ireland in the winter of 2015–2016. Thirty-three Sentinel 1 images were used to map the area and duration of floods over a 6-mo period from November 2015 to April 2016. Flood maps for 11 separate dates charted the development and persistence of floods nationally. The maximum flood extent during this period was estimated to be ~24,356 ha. The depth of rainfall influenced the magnitude of flood in the preceding 5 d and over more extended periods to a lesser degree. Reduced photosynthetic activity on farms affected by flooding was observed in Landsat 8 vegetation index difference images compared to the previous spring. The accuracy of the flood map was assessed against reports of flooding from affected farms, as well as other satellite-derived maps from Copernicus Emergency Management Service and Sentinel 2. Monte Carlo simulated elevation data (20 m resolution, 2.5 m root mean square error [RMSE]) were used to estimate the flood’s depth and volume. Although the modelled flood height showed a strong correlation with the measured river heights, differences of several metres were observed. Future mapping strategies are discussed, which include high–temporal-resolution soil moisture data, as part of an integrated multisensor approach to flood response over a range of spatial scales
Recommended from our members
Automatic near real-time selection of flood water levels from high resolution Synthetic Aperture Radar images for assimilation into hydraulic models: a case study
Flood extents caused by fluvial floods in urban and rural areas may be predicted by hydraulic models. Assimilation may be used to correct the model state and improve the estimates of the model parameters or external forcing. One common observation assimilated is the water level at various points along the modelled reach. Distributed water levels may be estimated indirectly along the flood extents in Synthetic Aperture Radar (SAR) images by intersecting the extents with the floodplain topography. It is necessary to select a subset of levels for assimilation because adjacent levels along the flood extent will be strongly correlated. A method for selecting such a subset automatically and in near real-time is described, which would allow the SAR water levels to be used in a forecasting model. The method first selects candidate waterline points in flooded rural areas having low slope. The waterline levels and positions are corrected for the effects of double reflections between the water surface and emergent vegetation at the flood edge. Waterline points are also selected in flooded urban areas away from radar shadow and layover caused by buildings, with levels similar to those in adjacent rural areas. The resulting points are thinned to reduce spatial autocorrelation using a top-down clustering approach. The method was developed using a TerraSAR-X image from a particular case study involving urban and rural flooding. The waterline points extracted proved to be spatially uncorrelated, with levels reasonably similar to those determined manually from aerial photographs, and in good agreement with those of nearby gauges
Recommended from our members
The impact of uncertainty in satellite data on the assessment of flood inundation models
The performance of flood inundation models is often assessed using satellite observed data; however these data have inherent uncertainty. In this study we assess the impact of this uncertainty when calibrating a flood inundation model (LISFLOOD-FP) for a flood event in December 2006 on the River Dee, North Wales, UK. The flood extent is delineated from an ERS-2 SAR image of the event using an active contour model (snake), and water levels at the flood margin calculated through intersection of the shoreline vector with LiDAR topographic data. Gauged water levels are used to create a reference water surface slope for comparison with the satellite-derived water levels. Residuals between the satellite observed data points and those from the reference line are spatially clustered into groups of similar values. We show that model calibration achieved using pattern matching of observed and predicted flood extent is negatively influenced by this spatial dependency in the data. By contrast, model calibration using water elevations produces realistic calibrated optimum friction parameters even when spatial dependency is present.
To test the impact of removing spatial dependency a new method of evaluating flood inundation model performance is developed by using multiple random subsamples of the water surface elevation data points. By testing for spatial dependency using Moran’s I, multiple subsamples of water elevations that have no significant spatial dependency are selected. The model is then calibrated against these data and the results averaged. This gives a near identical result to calibration using spatially dependent data, but has the advantage of being a statistically robust assessment of model performance in which we can have more confidence. Moreover, by using the variations found in the subsamples of the observed data it is possible to assess the effects of observational uncertainty on the assessment of flooding risk
Flood modeling and prediction using Earth Observation data
The ability to map floods from satellites has been known for over 40 years. Early images
of floods were rather difficult to obtain, and flood mapping from satellites was thus rather
opportunistic and limited to only a few case studies. However, over the last decade, with a
proliferation of open-access EO data, there has been much progress in the development of
Earth Observation products and services tailored to various end-user needs, as well as its
integration with flood modeling and prediction efforts. This article provides an overview of
the use of satellite remote sensing of floods and outlines recent advances in its application
for flood mapping, monitoring and its integration with flood models. Strengths and limita-
tions are discussed throughput, and the article concludes by looking at new developments
Integrating physical and topographic information into a fuzzy scheme to map flooded area by SAR
A flood mapping procedure based on a fuzzy sets theory has been developed.
The method is based on the integration of Synthetic Aperture Radar (SAR) measurements
with additional data on the inundated area, such as a land cover map and a digital elevation
model (DEM). The information on land cover has allowed us to account for both specular
reflection, typical of open water, and double bounce backscattering, typical of forested and
urban areas. DEM has been exploited to include simple hydraulic considerations on the
dependence of inundation probability on surface characteristics. Contextual information
has been taken into account too. The proposed algorithm has been tested on a flood
occurred in Italy on November 1994. A pair of ERS-1 images, collected before and after
(three days later) the flood, has been used. The results have been compared with the data
provided by a ground survey carried out when the flood reached its maximum extension.
Despite the temporal mismatch between the survey and the post-inundation SAR image,
the comparison has yielded encouraging results, with the 87% of the pixels correctly
classified as inundated
Earth resources: A continuing bibliography with indexes (issue 62)
This bibliography lists 544 reports, articles, and other documents introduced into the NASA scientific and technical information system between April 1 and June 30, 1989. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis
Earth Resources: A continuing bibliography (issue 32)
This bibliography list 580 reports, articles and other documents introduced into the NASA scientific and technical information system. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis
- …