Reconfigurable computing for large-scale graph traversal algorithms

This thesis proposes a reconfigurable computing approach for supporting parallel processing in large-scale graph traversal algorithms. Our approach is based on a reconfigurable hardware architecture which exploits the capabilities of both FPGAs (Field-Programmable Gate Arrays) and a multi-bank parallel memory subsystem. The proposed methodology to accelerate graph traversal algorithms has been applied to three case studies, revealing that application-specific hardware customisations can benefit performance. A summary of our four contributions is as follows. First, a reconfigurable computing approach to accelerate large-scale graph traversal algorithms. We propose a reconfigurable hardware architecture which decouples computation and communication while keeping multiple memory requests in flight at any given time, taking advantage of the high bandwidth of multi-bank memory subsystems. Second, a demonstration of the effectiveness of our approach through two case studies: the breadth-first search algorithm, and a graphlet counting algorithm from bioinformatics. Both case studies involve graph traversal, but each of them adopts a different graph data representation. Third, a method for using on-chip memory resources in FPGAs to reduce off-chip memory accesses for accelerating graph traversal algorithms, through a case-study of the All-Pairs Shortest-Paths algorithm. This case study has been applied to process human brain network data. Fourth, an evaluation of an approach based on instruction-set extension for FPGA design against many-core GPUs (Graphics Processing Units), based on a set of benchmarks with different memory access characteristics. It is shown that while GPUs excel at streaming applications, the proposed approach can outperform GPUs in applications with poor locality characteristics, such as graph traversal problems.Open Acces

Schnelle Löser für partielle Differentialgleichungen

[no abstract available

A Brief Review on Mathematical Tools Applicable to Quantum Computing for Modelling and Optimization Problems in Engineering

Since its emergence, quantum computing has enabled a wide spectrum of new possibilities and advantages, including its efficiency in accelerating computational processes exponentially. This has directed much research towards completely novel ways of solving a wide variety of engineering problems, especially through describing quantum versions of many mathematical tools such as Fourier and Laplace transforms, differential equations, systems of linear equations, and optimization techniques, among others. Exploration and development in this direction will revolutionize the world of engineering. In this manuscript, we review the state of the art of these emerging techniques from the perspective of quantum computer development and performance optimization, with a focus on the most common mathematical tools that support engineering applications. This review focuses on the application of these mathematical tools to quantum computer development and performance improvement/optimization. It also identifies the challenges and limitations related to the exploitation of quantum computing and outlines the main opportunities for future contributions. This review aims at offering a valuable reference for researchers in fields of engineering that are likely to turn to quantum computing for solutions. Doi: 10.28991/ESJ-2023-07-01-020 Full Text: PD

Time series forecasting using wavelet and support vector machine

Master'sMASTER OF ENGINEERIN

Automatic generation of high-throughput systolic tree-based solvers for modern FPGAs

Tree-based models are a class of numerical methods widely used in financial option pricing, which have a computational complexity that is quadratic with respect to the solution accuracy. Previous research has employed reconfigurable computing with small degrees of parallelism to provide faster hardware solutions compared with general-purpose processing software designs. However, due to the nature of their vector hardware architectures, they cannot scale their compute resources efficiently, leaving them with pricing latency figures which are quadratic with respect to the problem size, and hence to the solution accuracy. Also, their solutions are not productive as they require hardware engineering effort, and can only solve one type of tree problems, known as the standard American option. This thesis presents a novel methodology in the form of a high-level design framework which can capture any common tree-based problem, and automatically generates high-throughput field-programmable gate array (FPGA) solvers based on proposed scalable hardware architectures. The thesis has made three main contributions. First, systolic architectures were proposed for solving binomial and trinomial trees, which due to their custom systolic data-movement mechanisms, can scale their compute resources efficiently to provide linear latency scaling for medium-size trees and improved quadratic latency scaling for large trees. Using the proposed systolic architectures, throughput speed-ups of up to 5.6X and 12X were achieved for modern FPGAs, compared to previous vector designs, for medium and large trees, respectively. Second, a productive high-level design framework was proposed, that can capture any common binomial and trinomial tree problem, and a methodology was suggested to generate high-throughput systolic solvers with custom data precision, where the methodology requires no hardware design effort from the end user. Third, a fully-automated tool-chain methodology was proposed that, compared to previous tree-based solvers, improves user productivity by removing the manual engineering effort of applying the design framework to option pricing problems. Using the productive design framework, high-throughput systolic FPGA solvers have been automatically generated from simple end-user C descriptions for several tree problems, such as American, Bermudan, and barrier options.Open Acces

Parallel architectures and runtime systems co-design for task-based programming models

The increasing parallelism levels in modern computing systems has extolled the need for a holistic vision when designing multiprocessor architectures taking in account the needs of the programming models and applications. Nowadays, system design consists of several layers on top of each other from the architecture up to the application software. Although this design allows to do a separation of concerns where it is possible to independently change layers due to a well-known interface between them, it is hampering future systems design as the Law of Moore reaches to an end. Current performance improvements on computer architecture are driven by the shrinkage of the transistor channel width, allowing faster and more power efficient chips to be made. However, technology is reaching physical limitations were the transistor size will not be able to be reduced furthermore and requires a change of paradigm in systems design. This thesis proposes to break this layered design, and advocates for a system where the architecture and the programming model runtime system are able to exchange information towards a common goal, improve performance and reduce power consumption. By making the architecture aware of runtime information such as a Task Dependency Graph (TDG) in the case of dataflow task-based programming models, it is possible to improve power consumption by exploiting the critical path of the graph. Moreover, the architecture can provide hardware support to create such a graph in order to reduce the runtime overheads and making possible the execution of fine-grained tasks to increase the available parallelism. Finally, the current status of inter-node communication primitives can be exposed to the runtime system in order to perform a more efficient communication scheduling, and also creates new opportunities of computation and communication overlap that were not possible before. An evaluation of the proposals introduced in this thesis is provided and a methodology to simulate and characterize the application behavior is also presented.El aumento del paralelismo proporcionado por los sistemas de cómputo modernos ha provocado la necesidad de una visión holística en el diseño de arquitecturas multiprocesador que tome en cuenta las necesidades de los modelos de programación y las aplicaciones. Hoy en día el diseño de los computadores consiste en diferentes capas de abstracción con una interfaz bien definida entre ellas. Las limitaciones de esta aproximación junto con el fin de la ley de Moore limitan el potencial de los futuros computadores. La mayoría de las mejoras actuales en el diseño de los computadores provienen fundamentalmente de la reducción del tamaño del canal del transistor, lo cual permite chips más rápidos y con un consumo eficiente sin apenas cambios fundamentales en el diseño de la arquitectura. Sin embargo, la tecnología actual está alcanzando limitaciones físicas donde no será posible reducir el tamaño de los transistores motivando así un cambio de paradigma en la construcción de los computadores. Esta tesis propone romper este diseño en capas y abogar por un sistema donde la arquitectura y el sistema de tiempo de ejecución del modelo de programación sean capaces de intercambiar información para alcanzar una meta común: La mejora del rendimiento y la reducción del consumo energético. Haciendo que la arquitectura sea consciente de la información disponible en el modelo de programación, como puede ser el grafo de dependencias entre tareas en los modelos de programación dataflow, es posible reducir el consumo energético explotando el camino critico del grafo. Además, la arquitectura puede proveer de soporte hardware para crear este grafo con el objetivo de reducir el overhead de construir este grado cuando la granularidad de las tareas es demasiado fina. Finalmente, el estado de las comunicaciones entre nodos puede ser expuesto al sistema de tiempo de ejecución para realizar una mejor planificación de las comunicaciones y creando nuevas oportunidades de solapamiento entre cómputo y comunicación que no eran posibles anteriormente. Esta tesis aporta una evaluación de todas estas propuestas, así como una metodología para simular y caracterizar el comportamiento de las aplicacionesPostprint (published version

Hybrid Analog-Digital Co-Processing for Scientific Computation

In the past 10 years computer architecture research has moved to more heterogeneity and less adherence to conventional abstractions. Scientists and engineers hold an unshakable belief that computing holds keys to unlocking humanity's Grand Challenges. Acting on that belief they have looked deeper into computer architecture to find specialized support for their applications. Likewise, computer architects have looked deeper into circuits and devices in search of untapped performance and efficiency. The lines between computer architecture layers---applications, algorithms, architectures, microarchitectures, circuits and devices---have blurred. Against this backdrop, a menagerie of computer architectures are on the horizon, ones that forgo basic assumptions about computer hardware, and require new thinking of how such hardware supports problems and algorithms. This thesis is about revisiting hybrid analog-digital computing in support of diverse modern workloads. Hybrid computing had extensive applications in early computing history, and has been revisited for small-scale applications in embedded systems. But architectural support for using hybrid computing in modern workloads, at scale and with high accuracy solutions, has been lacking. I demonstrate solving a variety of scientific computing problems, including stochastic ODEs, partial differential equations, linear algebra, and nonlinear systems of equations, as case studies in hybrid computing. I solve these problems on a system of multiple prototype analog accelerator chips built by a team at Columbia University. On that team I made contributions toward programming the chips, building the digital interface, and validating the chips' functionality. The analog accelerator chip is intended for use in conjunction with a conventional digital host computer. The appeal and motivation for using an analog accelerator is efficiency and performance, but it comes with limitations in accuracy and problem sizes that we have to work around. The first problem is how to do problems in this unconventional computation model. Scientific computing phrases problems as differential equations and algebraic equations. Differential equations are a continuous view of the world, while algebraic equations are a discrete one. Prior work in analog computing mostly focused on differential equations; algebraic equations played a minor role in prior work in analog computing. The secret to using the analog accelerator to support modern workloads on conventional computers is that these two viewpoints are interchangeable. The algebraic equations that underlie most workloads can be solved as differential equations, and differential equations are naturally solvable in the analog accelerator chip. A hybrid analog-digital computer architecture can focus on solving linear and nonlinear algebra problems to support many workloads. The second problem is how to get accurate solutions using hybrid analog-digital computing. The reason that the analog computation model gives less accurate solutions is it gives up representing numbers as digital binary numbers, and instead uses the full range of analog voltage and current to represent real numbers. Prior work has established that encoding data in analog signals gives an energy efficiency advantage as long as the analog data precision is limited. While the analog accelerator alone may be useful for energy-constrained applications where inputs and outputs are imprecise, we are more interested in using analog in conjunction with digital for precise solutions. This thesis gives novel insight that the trick to do so is to solve nonlinear problems where low-precision guesses are useful for conventional digital algorithms. The third problem is how to solve large problems using hybrid analog-digital computing. The reason the analog computation model can't handle large problems is it gives up step-by-step discrete-time operation, instead allowing variables to evolve smoothly in continuous time. To make that happen the analog accelerator works by chaining hardware for mathematical operations end-to-end. During computation analog data flows through the hardware with no overheads in control logic and memory accesses. The downside is then the needed hardware size grows alongside problem sizes. While scientific computing researchers have for a long time split large problems into smaller subproblems to fit in digital computer constraints, this thesis is a first attempt to consider these divide-and-conquer algorithms as an essential tool in using the analog model of computation. As we enter the post-Moore’s law era of computing, unconventional architectures will offer specialized models of computation that uniquely support specific problem types. Two prominent examples are deep neural networks and quantum computers. Recent trends in computer science research show these unconventional architectures will soon have broad adoption. In this thesis I show another specialized, unconventional architecture is to use analog accelerators to solve problems in scientific computing. Computer architecture researchers will discover other important models of computation in the future. This thesis is an example of the discovery process, implementation, and evaluation of how an unconventional architecture supports specialized workloads