Convolutional Pitch Target Approximation Model for Speech Synthesis

In this paper, we investigate pitch contour modelling in speech synthesis based on segmental units. A convolutional pitch target approximation model is proposed. This model allows jointly stochastic modelling of framewise pitch and pitch contour of longer units, of which the intuitive relations are revealed by a convolutional target approximation filter. The pitch contour is stylized by a linear representation called pitch target. In synthesis stage, the likelihood of the framewise model and the pitch target model are jointly maximized using a Toeplitz matrix representing the discrete convolutional filter

Advances in Probabilistic Deep Learning

This thesis is concerned with methodological advances in probabilistic inference and their application to core challenges in machine perception and AI. Inferring a posterior distribution over the parameters of a model given some data is a central challenge that occurs in many fields ranging from finance and artificial intelligence to physics. Exact calculation is impossible in all but the simplest cases and a rich field of approximate inference has been developed to tackle this challenge. This thesis develops both an advance in approximate inference and an application of these methods to the problem of speech synthesis. In the first section of this thesis we develop a novel framework for constructing Markov Chain Monte Carlo (MCMC) kernels that can efficiently sample from high dimensional distributions such as the posteriors, that frequently occur in machine perception. We provide a specific instance of this framework and demonstrate that it can match or exceed the performance of Hamiltonian Monte Carlo without requiring gradients of the target distribution. In the second section of the thesis we focus on the application of approximate inference techniques to the task of synthesising human speech from text. By using advances in neural variational inference we are able to construct a state of the art speech synthesis system in which it is possible to control aspects of prosody such as emotional expression from significantly less supervised data than previously existing state of the art methods

Subspace Gaussian Mixture Models for Language Identification and Dysarthric Speech Intelligibility Assessment

En esta Tesis se ha investigado la aplicación de técnicas de modelado de subespacios de mezclas de Gaussianas en dos problemas relacionados con las tecnologías del habla, como son la identificación automática de idioma (LID, por sus siglas en inglés) y la evaluación automática de inteligibilidad en el habla de personas con disartria. Una de las técnicas más importantes estudiadas es el análisis factorial conjunto (JFA, por sus siglas en inglés). JFA es, en esencia, un modelo de mezclas de Gaussianas en el que la media de cada componente se expresa como una suma de factores de dimensión reducida, y donde cada factor representa una contribución diferente a la señal de audio. Esta factorización nos permite compensar nuestros modelos frente a contribuciones indeseadas presentes en la señal, como la información de canal. JFA se ha investigado como clasficador y como extractor de parámetros. En esta última aproximación se modela un solo factor que representa todas las contribuciones presentes en la señal. Los puntos en este subespacio se denominan i-Vectors. Así, un i-Vector es un vector de baja dimensión que representa una grabación de audio. Los i-Vectors han resultado ser muy útiles como vector de características para representar señales en diferentes problemas relacionados con el aprendizaje de máquinas. En relación al problema de LID, se han investigado dos sistemas diferentes de acuerdo al tipo de información extraída de la señal. En el primero, la señal se parametriza en vectores acústicos con información espectral a corto plazo. En este caso, observamos mejoras de hasta un 50% con el sistema basado en i-Vectors respecto al sistema que utilizaba JFA como clasificador. Se comprobó que el subespacio de canal del modelo JFA también contenía información del idioma, mientras que con los i-Vectors no se descarta ningún tipo de información, y además, son útiles para mitigar diferencias entre los datos de entrenamiento y de evaluación. En la fase de clasificación, los i-Vectors de cada idioma se modelaron con una distribución Gaussiana en la que la matriz de covarianza era común para todos. Este método es simple y rápido, y no requiere de ningún post-procesado de los i-Vectors. En el segundo sistema, se introdujo el uso de información prosódica y formántica en un sistema de LID basado en i-Vectors. La precisión de éste estaba por debajo de la del sistema acústico. Sin embargo, los dos sistemas son complementarios, y se obtuvo hasta un 20% de mejora con la fusión de los dos respecto al sistema acústico solo. Tras los buenos resultados obtenidos para LID, y dado que, teóricamente, los i-Vectors capturan toda la información presente en la señal, decidimos usarlos para la evaluar de manera automática la inteligibilidad en el habla de personas con disartria. Los logopedas están muy interesados en esta tecnología porque permitiría evaluar a sus pacientes de una manera objetiva y consistente. En este caso, los i-Vectors se obtuvieron a partir de información espectral a corto plazo de la señal, y la inteligibilidad se calculó a partir de los i-Vectors obtenidos para un conjunto de palabras dichas por el locutor evaluado. Comprobamos que los resultados eran mucho mejores si en el entrenamiento del sistema se incorporaban datos de la persona que iba a ser evaluada. No obstante, esta limitación podría aliviarse utilizando una mayor cantidad de datos para entrenar el sistema.In this Thesis, we investigated how to effciently apply subspace Gaussian mixture modeling techniques onto two speech technology problems, namely automatic spoken language identification (LID) and automatic intelligibility assessment of dysarthric speech. One of the most important of such techniques in this Thesis was joint factor analysis (JFA). JFA is essentially a Gaussian mixture model where the mean of the components is expressed as a sum of low-dimension factors that represent different contributions to the speech signal. This factorization makes it possible to compensate for undesired sources of variability, like the channel. JFA was investigated as final classiffer and as feature extractor. In the latter approach, a single subspace including all sources of variability is trained, and points in this subspace are known as i-Vectors. Thus, one i-Vector is defined as a low-dimension representation of a single utterance, and they are a very powerful feature for different machine learning problems. We have investigated two different LID systems according to the type of features extracted from speech. First, we extracted acoustic features representing short-time spectral information. In this case, we observed relative improvements with i-Vectors with respect to JFA of up to 50%. We realized that the channel subspace in a JFA model also contains language information whereas i-Vectors do not discard any language information, and moreover, they help to reduce mismatches between training and testing data. For classification, we modeled the i-Vectors of each language with a Gaussian distribution with covariance matrix shared among languages. This method is simple and fast, and it worked well without any post-processing. Second, we introduced the use of prosodic and formant information with the i-Vectors system. The performance was below the acoustic system but both were found to be complementary and we obtained up to a 20% relative improvement with the fusion with respect to the acoustic system alone. Given the success in LID and the fact that i-Vectors capture all the information that is present in the data, we decided to use i-Vectors for other tasks, specifically, the assessment of speech intelligibility in speakers with different types of dysarthria. Speech therapists are very interested in this technology because it would allow them to objectively and consistently rate the intelligibility of their patients. In this case, the input features were extracted from short-term spectral information, and the intelligibility was assessed from the i-Vectors calculated from a set of words uttered by the tested speaker. We found that the performance was clearly much better if we had available data for training of the person that would use the application. We think that this limitation could be relaxed if we had larger databases for training. However, the recording process is not easy for people with disabilities, and it is difficult to obtain large datasets of dysarthric speakers open to the research community. Finally, the same system architecture for intelligibility assessment based on i-Vectors was used for predicting the accuracy that an automatic speech recognizer (ASR) system would obtain with dysarthric speakers. The only difference between both was the ground truth label set used for training. Predicting the performance response of an ASR system would increase the confidence of speech therapists in these systems and would diminish health related costs. The results were not as satisfactory as in the previous case, probably because an ASR is a complex system whose accuracy can be very difficult to be predicted only with acoustic information. Nonetheless, we think that we opened a door to an interesting research direction for the two problems

EMG-to-Speech: Direct Generation of Speech from Facial Electromyographic Signals

The general objective of this work is the design, implementation, improvement and evaluation of a system that uses surface electromyographic (EMG) signals and directly synthesizes an audible speech output: EMG-to-speech

Prosody generation for text-to-speech synthesis

The absence of convincing intonation makes current parametric speech synthesis systems sound dull and lifeless, even when trained on expressive speech data. Typically, these systems use regression techniques to predict the fundamental frequency (F0) frame-by-frame. This approach leads to overlysmooth pitch contours and fails to construct an appropriate prosodic structure across the full utterance. In order to capture and reproduce larger-scale pitch patterns, we propose a template-based approach for automatic F0 generation, where per-syllable pitch-contour templates (from a small, automatically learned set) are predicted by a recurrent neural network (RNN). The use of syllable templates mitigates the over-smoothing problem and is able to reproduce pitch patterns observed in the data. The use of an RNN, paired with connectionist temporal classification (CTC), enables the prediction of structure in the pitch contour spanning the entire utterance. This novel F0 prediction system is used alongside separate LSTMs for predicting phone durations and the other acoustic features, to construct a complete text-to-speech system. Later, we investigate the benefits of including long-range dependencies in duration prediction at frame-level using uni-directional recurrent neural networks. Since prosody is a supra-segmental property, we consider an alternate approach to intonation generation which exploits long-term dependencies of F0 by effective modelling of linguistic features using recurrent neural networks. For this purpose, we propose a hierarchical encoder-decoder and multi-resolution parallel encoder where the encoder takes word and higher level linguistic features at the input and upsamples them to phone-level through a series of hidden layers and is integrated into a Hybrid system which is then submitted to Blizzard challenge workshop. We then highlight some of the issues in current approaches and a plan for future directions of investigation is outlined along with on-going work