Low carbon manufacturing: Fundamentals, methodology and application case studies

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The requirement and awareness of the carbon emissions reduction in several scales and application of sustainable manufacturing have been now critically reviewed as important manufacturing trends in the 21st century. The key requirements for carbon emissions reduction in this context are energy efficiency, resource utilization, waste minimization and even the reduction of total carbon footprint. The recent approaches tend to only analyse and evaluate carbon emission contents of interested engineering systems. However, a systematic approach based on strategic decision making has not been officially defined with no standards or guidelines further formulated yet. The above requirements demand a fundamentally new approach to future applications of sustainable low carbon manufacturing. Energy and resource efficiencies and effectiveness based low carbon manufacturing (EREEbased LCM) is thus proposed in this research. The proposed EREE-based LCM is able to provide the systematic approach for integrating three key elements (energy efficiency, resource utilization and waste minimization) and taking account of them comprehensively in a scientific manner. The proposed approach demonstrates the solution for reducing carbon emissions in manufacturing systems at both the machine and shop floor levels. An integrated framework has been developed to demonstrate the feasible approach to achieve effective EREE-based LCM at different manufacturing levels including machine, shop floor, enterprise and supply chains. The framework is established in the matrix form with appropriate tools and methodologies related to the three keys elements at each manufacturing level. The theoretical model for EREE-based LCM is also presented, which consists of three essential elements including carbon dioxide emissions evaluation, an optimization method and waste reduction methodology. The preliminary experiment and simulations are carried out to evaluate the proposed concept. The modelling of EREE-based LCM has been developed for both the machine and shop floor levels. At the machine level, the modelling consists of the simulation of energy consumption due to the effect of machining set-up, the optimization model and waste minimization related to the optimized machining set-up. The simulation is established using sugeno type fuzzy logic. The learning method uses on experimental data (cutting trials) while the optimization model is created using mamdani type fuzzy logic with grey relational grade technique. At the shop floor level, the modelling is designed dependent on the cooperation with machine level modelling. The determination of the work assignment including machining set-up depends on fuzzy integer linear programming for several objectives with the evaluation of energy consumption data from machine level modelling. The simulation method is applied as the part of shop floor level modelling in order to maximize resource utilization and minimize undesired waste. The output from the shop floor level modelling is machine production a planning with preventive plan that can minimize the total carbon footprint. The axiomatic design theory has been applied to generate the comprehensive conceptual model E-R-W-C (energy, resource, waste and carbon footprint) of EREE-based LCM as a generic perspective of the systematic modelling. The implementation of EREE-based LCM on both the machine and shop floor levels are demonstrated using MATLAB toolbox and ProModel based simulation. The proposed concept, framework and modelling have been further evaluated and validated through case studies and experimental results.This work is financially supported by The Royal Thai Government

Low carbon manufacturing : fundamentals, methodology and application case studies

The requirement and awareness of the carbon emissions reduction in several scales and application of sustainable manufacturing have been now critically reviewed as important manufacturing trends in the 21st century. The key requirements for carbon emissions reduction in this context are energy efficiency, resource utilization, waste minimization and even the reduction of total carbon footprint. The recent approaches tend to only analyse and evaluate carbon emission contents of interested engineering systems. However, a systematic approach based on strategic decision making has not been officially defined with no standards or guidelines further formulated yet. The above requirements demand a fundamentally new approach to future applications of sustainable low carbon manufacturing. Energy and resource efficiencies and effectiveness based low carbon manufacturing (EREEbased LCM) is thus proposed in this research. The proposed EREE-based LCM is able to provide the systematic approach for integrating three key elements (energy efficiency, resource utilization and waste minimization) and taking account of them comprehensively in a scientific manner. The proposed approach demonstrates the solution for reducing carbon emissions in manufacturing systems at both the machine and shop floor levels. An integrated framework has been developed to demonstrate the feasible approach to achieve effective EREE-based LCM at different manufacturing levels including machine, shop floor, enterprise and supply chains. The framework is established in the matrix form with appropriate tools and methodologies related to the three keys elements at each manufacturing level. The theoretical model for EREE-based LCM is also presented, which consists of three essential elements including carbon dioxide emissions evaluation, an optimization method and waste reduction methodology. The preliminary experiment and simulations are carried out to evaluate the proposed concept. The modelling of EREE-based LCM has been developed for both the machine and shop floor levels. At the machine level, the modelling consists of the simulation of energy consumption due to the effect of machining set-up, the optimization model and waste minimization related to the optimized machining set-up. The simulation is established using sugeno type fuzzy logic. The learning method uses on experimental data (cutting trials) while the optimization model is created using mamdani type fuzzy logic with grey relational grade technique. At the shop floor level, the modelling is designed dependent on the cooperation with machine level modelling. The determination of the work assignment including machining set-up depends on fuzzy integer linear programming for several objectives with the evaluation of energy consumption data from machine level modelling. The simulation method is applied as the part of shop floor level modelling in order to maximize resource utilization and minimize undesired waste. The output from the shop floor level modelling is machine production a planning with preventive plan that can minimize the total carbon footprint. The axiomatic design theory has been applied to generate the comprehensive conceptual model E-R-W-C (energy, resource, waste and carbon footprint) of EREE-based LCM as a generic perspective of the systematic modelling. The implementation of EREE-based LCM on both the machine and shop floor levels are demonstrated using MATLAB toolbox and ProModel based simulation. The proposed concept, framework and modelling have been further evaluated and validated through case studies and experimental results.EThOS - Electronic Theses Online ServiceRoyal Thai GovernmentGBUnited Kingdo

Application of ”ART SIMULATOR” for Manufacturing Similarity Identification in Group Technology Design - Chapter 10

This chapter 10 carried out the exceptional implementation of ART-1 neural network in the analysis of the manufacturing similarity of the cylindrical parts within the group technology design. Established concept of the group technology design begins from the complex part of the group or the group representative. Group representative has all the geometrical elements of the parts in group, and manufacturing procedure may be applied to the machining of any part in the group. The complex part may be realistic or a hypothetical one. The ART-1 artificial neural network provided manufacturing classification according to the geometrical similarities of work-pieces for the group of cylindrical parts. For the manufacturing similarity identification within the group technology design, software package "ART Simulator" is developed and presented in this chapter

Integrated process planning and scheduling for common prismatic parts in a 5-axis CNC environment

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Daydreaming factories

Optimisation of factories, a cornerstone of production engineering for the past half century, relies on formulating the challenges with limited degrees of freedom. In this paper, technological advances are reviewed to propose a “daydreaming” framework for factories that use their cognitive capacity for looking into the future or “foresighting”. Assessing and learning from the possible eventualities enable breakthroughs with many degrees of freedom and make daydreaming factories antifragile. In these factories with augmented and reciprocal learning and foresighting processes, revolutionary reactions to external and internal stimuli are unnecessary and industrial co-evolution of people, processes and products will replace industrial revolutions

Mass Production Processes

It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes