Improved thermal management and analysis for stator end-windings of electrical machines

In electrical machine design, thermal management plays a key role in improving performance and reducing size. End-windings are commonly identified as the machine hot-spot. Hence, lowering and predicting end-windings temperature are crucial tasks in thermal management of electrical machines. This paper proposes and investigates a non-invasive but effective cooling method that aims for a uniform cooling of a machine’s winding by implementing direct cooling on its end-windings. Modelling and experimental results show that a 25% hot-spot temperature reduction on a particular application can be achieved. To analyse the proposed technique in detail, an accurate but computationally-economic lumped parameter thermal network is developed. Comparison between a ‘standard’ thermal network and its simplified equivalent (with less nodes) is presented where the models are developed and fine-tuned based on experimental data. All the above is used to investigate the potential of the proposed end-winding cooling method with different configurations of the methodology

Thermally induced mechanical stress in the stator windings of electrical machines

The lifetime of an electrical machine mainly depends on the thermal overloading. Modern day applications of electrical machines on one hand require compact machines with high power density, while on the other hand force electrical machines to undergo frequent temperature cycling. Until recently, in the case of electrical machines, the main factor related to the degradation of the winding insulation was thought to be the thermal oxidization of the insulation materials. It has now been revealed that thermal overloading can also induce mechanical stress in the windings of electrical machines, which over time could lead to fatigue and degradation. In this paper, a comprehensive study of the thermally induced mechanical stress in the windings of an electrical machine is presented. The study is performed using combined thermo-mechanical models. The numerical results are validated by experiments on a segmented stator winding set-up

Towards Fully Additively-Manufactured Permanent Magnet Synchronous Machines: Opportunities and Challenges

With the growing interest in electrification and as hybrid and pure electric powertrains are adopted in more applications, electrical machine design is facing challenges in terms of meeting very demanding performance metrics for example high specific power, harsh environments, etc. This provides clear motivation to explore the impact of advanced materials and manufacturing on the performance of electrical machines. This paper provides an overview of additive manufacturing (AM) approaches that can be used for constructing permanent magnet (PM) machines, with a specific focus on additively-manufactured iron core, winding, insulation, PM as well as cooling systems. Since there has only been a few attempts so far to explore AM in electrical machines (especially when it comes to fully additively-manufactured machines), the benefits and challenges of AM have not been comprehensively understood. In this regard, this paper offers a detailed comparison of multiple multi-material AM methods, showing not only the possibility of fully additively-manufactured PM machines but also the potential significant improvements in their mechanical, electromagnetic and thermal properties. The paper will provide a comprehensive discussion of opportunities and challenges of AM in the context of electrical machines

Thermal management of a high speed permanent magnet machine for an aeroengine

The paper describes the mechanical and thermal design of a high speed, high power density synchronous permanent magnet machine for an aero engine starter generator system with a power rating of 150 kW and maximum speed of 32,000 rpm. As both mechanical and thermal aspects have a direct impact on machine overall performance and weight reduction, a critical design optimisation was carried out. Intensive cooling is guaranteed by direct liquid oil-cooling of stationary components; a stator sleeve is also introduced into the airgap to prevent excessive windage. Thermal investigations were carried out by the means of Computational Fluid Dynamics (CFD) and Lumped Parameter Thermal Network (LPTN) analyses. Experimental validation also allowed the identification of most critical machine temperatures and the validation of the models developed. Finite Element Analysis(FEA) is used for the static structural analyses of the statorsleeve

Comparison and Design Optimization of a Five-Phase Flux-Switching PM Machine for In-Wheel Traction Applications

A comparative study of five-phase outer-rotor flux-switching permanent magnet (FSPM) machines with different topologies for in-wheel traction applications is presented in this paper. Those topologies include double-layer winding, single-layer winding, C-core, and E-core configurations. The electromagnetic performance in the low-speed region, the flux-weakening capability in the high-speed region, and the fault-tolerance capability are all investigated in detail. The results indicate that the E-core FSPM machine has performance advantages. Furthermore, two kinds of E-core FSPM machines with different stator and rotor pole combinations are optimized, respectively. In order to reduce the computational burden during the large-scale optimization process, a mathematical technique is developed based on the concept of computationally efficient finite-element analysis. While a differential evolution algorithm serves as a global search engine to target optimized designs. Subsequently, multiobjective tradeoffs are presented based on a Pareto-set for 20 000 candidate designs. Finally, an optimal design is prototyped, and some experimental results are given to confirm the validity of the simulation results in this paper

Assessment of cooling methods for increased power density in electrical machines

A comprehensive thermal analysis of three different electrical machines is presented, with a view of identifying design aspects that can be exploited to achieve higher power density. A review of some novel cooling methods is initially made. Following this, the stator and rotor thermal resistance paths of the three selected machines are created and the individual components of each resistance path mathematically analysed to identify the parts of the machines that provide greatest potential to reduce stator and rotor temperatures. This is verified with a Design of Experiments analysis on the thermal resistance models of each. Finally, a different novel cooling method is applied to the model of each machine, demonstrating the typical temperature reductions that can be achieved

Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management

This study is the first in a series dedicated to investigating the airflow and thermal management of electrical machines. Owing to the temperature dependent resistive losses in the machine's windings, any improvement in cooling provides a direct reduction in losses and an increase in efficiency. This study focuses on the airflow which is intrinsically linked to the thermal behaviour of the machine as well as the windage power consumed to drive the air through the machine. A full computational fluid dynamics (CFD) model has been used to analyse the airflow around all major components of the machine. Results have been experimentally validated and investigated. At synchronous speed the experimentally tested mass flow rate and windage torque were under predicted by 4% and 7%, respectively, by the CFD. A break-down of torque by component shows that the fan consumes approximately 87% of the windage torque

Trade-off analysis and design of a high power density PM machine for flooded industrial pump

This paper presents the trade-off analysis and design of a high power-density machine for industrial pump applications. The developed permanent magnet synchronous machine drives an electric, oil flooded pump. Different slot/pole combination and winding configuration have been investigated in order to identify the optimal combination that satisfies the electromagnetic and thermal constraint while keeping the losses as small as possible. Several strategies such as the use of the Cobalt iron material for the stator core lamination and the adoption of Halbach array have been investigated in this work to improve the performance capabilities of the designed machine. The electromagnetic performances have been evaluated by using a finite element method. Thermal behaviour has been determined using a lumped parameter network. The outcome of the thermal analysis helped to identify the optimal cooling configurations. The final results are presented highlighting the achieved design targets

Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry

Here, a typical small low-voltage totally enclosed fan-cooled (TEFC) motor (output power ∼10 kW) has been studied using computational fluid dynamics. The complexity of the end-winding geometries, often consisting of several insulated copper strands bound together, provides a challenge to the modelling and analysis of heat transfer and fluid flow phenomena occurring in the end region, which typically is an area of most interest for thermal management. Approximated geometries are usually employed in order to model the end windings to reduce the analysis time and cost. This paper presents a comparison of two cases, a typical simplified geometry and a more realistic geometry of end windings, and uses these cases to highlight the challenges and impact on predicted heat transfer. A comparison of the two models indicate that the different representations of end winding geometries can affect the heat dissipation rate through the outer housing by up to 45%