Power-Constrained Fuzzy Logic Control of Video Streaming over a Wireless Interconnect

Wireless communication of video, with Bluetooth as an example, represents a compromise between channel conditions, display and decode deadlines, and energy constraints. This paper proposes fuzzy logic control (FLC) of automatic repeat request (ARQ) as a way of reconciling these factors, with a 40% saving in power in the worst channel conditions from economizing on transmissions when channel errors occur. Whatever the channel conditions are, FLC is shown to outperform the default Bluetooth scheme and an alternative Bluetooth-adaptive ARQ scheme in terms of reduced packet loss and delay, as well as improved video quality

Robust H∞ fuzzy output-feedback control with multiple probabilistic delays and multiple missing measurements

Copyright [2010] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.In this paper, the robust H∞-control problem is investigated for a class of uncertain discrete-time fuzzy systems with both multiple probabilistic delays and multiple missing measurements. A sequence of random variables, all of which are mutually independent but obey the Bernoulli distribution, is introduced to account for the probabilistic communication delays. The measurement-missing phenomenon occurs in a random way. The missing probability for each sensor satisfies a certain probabilistic distribution in the interval. Here, the attention is focused on the analysis and design of H∞ fuzzy output-feedback controllers such that the closed-loop Takagi-Sugeno (T-S) fuzzy-control system is exponentially stable in the mean square. The disturbance-rejection attenuation is constrained to a given level by means of the H∞-performance index. Intensive analysis is carried out to obtain sufficient conditions for the existence of admissible output feedback controllers, which ensures the exponential stability as well as the prescribed H∞ performance. The cone-complementarity-linearization procedure is employed to cast the controller-design problem into a sequential minimization one that is solved by the semi-definite program method. Simulation results are utilized to demonstrate the effectiveness of the proposed design technique in this paper.This work was supported in part by the Engineering and Physical Sciences Research Council, U.K., under Grant GR/S27658/01, in part by the Royal Society, U.K., in part by the National Natural Science Foundation of China under Grant 60825303, in part by the National 973 Project of China under Grant 2009CB320600, in part by the Heilongjiang Outstanding Youth Science Fund of China under Grant JC200809, in part by the Youth Science Fund of Heilongjiang Province of China under Grant QC2009C63, and in part by the Alexander von Humboldt Foundation of Germany

A review on analysis and synthesis of nonlinear stochastic systems with randomly occurring incomplete information

Copyright q 2012 Hongli Dong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.In the context of systems and control, incomplete information refers to a dynamical system in which knowledge about the system states is limited due to the difficulties in modeling complexity in a quantitative way. The well-known types of incomplete information include parameter uncertainties and norm-bounded nonlinearities. Recently, in response to the development of network technologies, the phenomenon of randomly occurring incomplete information has become more and more prevalent. Such a phenomenon typically appears in a networked environment. Examples include, but are not limited to, randomly occurring uncertainties, randomly occurring nonlinearities, randomly occurring saturation, randomly missing measurements and randomly occurring quantization. Randomly occurring incomplete information, if not properly handled, would seriously deteriorate the performance of a control system. In this paper, we aim to survey some recent advances on the analysis and synthesis problems for nonlinear stochastic systems with randomly occurring incomplete information. The developments of the filtering, control and fault detection problems are systematically reviewed. Latest results on analysis and synthesis of nonlinear stochastic systems are discussed in great detail. In addition, various distributed filtering technologies over sensor networks are highlighted. Finally, some concluding remarks are given and some possible future research directions are pointed out. © 2012 Hongli Dong et al.This work was supported in part by the National Natural Science Foundation of China under Grants 61273156, 61134009, 61273201, 61021002, and 61004067, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant GR/S27658/01, the Royal Society of the UK, the National Science Foundation of the USA under Grant No. HRD-1137732, and the Alexander von Humboldt Foundation of German

Project scheduling under undertainty – survey and research potentials.

The vast majority of the research efforts in project scheduling assume complete information about the scheduling problem to be solved and a static deterministic environment within which the pre-computed baseline schedule will be executed. However, in the real world, project activities are subject to considerable uncertainty, that is gradually resolved during project execution. In this survey we review the fundamental approaches for scheduling under uncertainty: reactive scheduling, stochastic project scheduling, stochastic GERT network scheduling, fuzzy project scheduling, robust (proactive) scheduling and sensitivity analysis. We discuss the potentials of these approaches for scheduling projects under uncertainty.Management; Project management; Robustness; Scheduling; Stability;

Advancing the state of the art in the modelling and simulation of information systems evaluation

It is widely accepted that Information Systems Evaluation (ISE) is a powerful and useful technique that can be used to assess IT/IS investments in an a-priori or a-posteriori sense. Traditional approaches to ISE have tended to centre upon financial and management accounting frameworks, seeking to reconcile tangible and intangible costs, benefits, risks and value factors. Such techniques, however, do not provide the IS researcher or practitioner with further insight or appreciation of any inherent and implicit inter-relationships, in the investment justification process. Thus, this paper outlines and discusses via a taxonomy and resulting classification, alternative and complementary approaches that can be applied to ISE from the fields of Artificial Intelligence (AI), Operational Research (OR) and Management Science (MS). The paper subsequently concludes that such approaches can be potentially used by researchers and practitioners in the field, as a basis for carrying out further research in the field of applied ISE

A survey of machine learning techniques applied to self organizing cellular networks

In this paper, a survey of the literature of the past fifteen years involving Machine Learning (ML) algorithms applied to self organizing cellular networks is performed. In order for future networks to overcome the current limitations and address the issues of current cellular systems, it is clear that more intelligence needs to be deployed, so that a fully autonomous and flexible network can be enabled. This paper focuses on the learning perspective of Self Organizing Networks (SON) solutions and provides, not only an overview of the most common ML techniques encountered in cellular networks, but also manages to classify each paper in terms of its learning solution, while also giving some examples. The authors also classify each paper in terms of its self-organizing use-case and discuss how each proposed solution performed. In addition, a comparison between the most commonly found ML algorithms in terms of certain SON metrics is performed and general guidelines on when to choose each ML algorithm for each SON function are proposed. Lastly, this work also provides future research directions and new paradigms that the use of more robust and intelligent algorithms, together with data gathered by operators, can bring to the cellular networks domain and fully enable the concept of SON in the near future

Beurteilung der Resttragfähigkeit von Bauwerken mit Hilfe der Fuzzy-Logik und Entscheidungstheorie

Whereas the design of new structures is almost completely regulated by codes, there are no objective ways for the evaluation of existing facilities. Experts often are not familiar with the new tasks in system identification and try to retrieve at least some information from available documents. They therefore make compromises which, for many stakeholders, are not satisfying. Consequently, this publication presents a more objective and more realistic method for condition assessment. Necessary basics for this task are fracture mechanics combined with computational analysis, methods and techniques for geometry recording and material investigation, ductility and energy dissipation, risk analysis and uncertainty consideration. Present tools for evaluation perform research on how to analytically conceptualize a structure directly from given loads and measured response. Since defects are not necessarily visible or in a direct way detectable, several damage indices are combined and integrated in a model of the real system. Fuzzy-sets are ideally suited to illustrate parametric/data uncertainty and system- or model uncertainty. Trapezoidal membership functions may very well represent the condition state of structural components as function of damage extent or performance. Tthe residual load-bearing capacity can be determined by successively performing analyses in three steps. The "Screening assessment" shall eliminate a large majority of structures from detailed consideration and advise on immediate precautions to save lives and high economic values. Here, the defects have to be explicitly defined and located. If this is impossible, an "approximate evaluation" should follow describing system geometry, material properties and failure modes in detail. Here, a fault-tree helps investigate defaults in a systematic way avoiding random search or negligence of important features or damage indices. In order to inform about the structural system it is deemed essential not only due to its conceptual clarity, but also due to its applicational simplicity. It therefore represents an important prerequisite in condition assessment though special circumstances might require "fur-ther investigations" to consider the actual material parameters and unaccounted reserves due to spatial or other secondary contributions. Here, uncertainties with respect to geometry, material, loading or modeling should in no case be neglected, but explicitly quantified. Postulating a limited set of expected failure modes is not always sufficient, since detectable signature changes are seldom directly attributable and every defect might -together with other unforeseen situations- become decisive. So, a determination of all possible scenarios to consider every imaginable influence would be required. Risk is produced by a combination of various and ill-defined failure modes. Due to the interaction of many variables there is no simple and reliable way to predict which failure mode is dominant. Risk evaluation therefore comprises the estimation of the prognostic factor with respect to undesir-able events, component importance and the expected damage extent.Während die Bemessung von Tragwerken im allgemeinen durch Vorschriften geregelt ist, gibt es für die Zustandsbewertung bestehender Bauwerken noch keine objektiven Richtlinien. Viele Experten sind mit der neuen Problematik (Systemidentifikation anhand von Belastung und daraus entstehender Strukturantwort) noch nicht vertraut und begnügen sich daher mit Kompromißlösungen. Für viele Bauherren ist dies unbefriedigend, weshalb hier eine objektivere und wirklichkeitsnähere Zustandsbewertung vorgestellt wird. Wichtig hierfür sind theoretische Grundlagen der Schadensanalyse, Methoden und Techniken zur Geometrie- und Materialerkundung, Duktilität und Energieabsorption, Risikoanalyse und Beschreibung von Unsicherheiten. Da nicht alle Schäden offensichtlich sind, kombiniert man zur Zeit mehrere Zustandsindikatoren, bereitet die registrierten Daten gezielt auf, und integriert sie vor einer endgültigen Bewertung in ein validiertes Modell. Werden deterministische Nachweismethoden mit probabilstischen kombiniert, lassen sich nur zufällige Fehler problemlos minimieren. Systematische Fehler durch ungenaue Modellierung oder vagem Wissen bleiben jedoch bestehen. Daß Entscheidungsträger mit unsicheren, oft sogar widersprüchlichen Angaben subjektiv urteilen, ist also nicht zu vermeiden. In dieser Arbeit wird gezeigt, wie mit Hilfe eines dreistufigen Bewertungsverfahrens Tragglieder in Qualitätsklassen eingestuft werden können. Abhängig von ihrem mittleren Schadensausmaß, ihrer Strukturbedeutung I (wiederum von ihrem Stellenwert bzw. den Konsequenzen ihrer Schädigung abhängig) und ihrem Prognosefaktor L ergibt sich ihr Versagensrisiko mit. Das Risiko für eine Versagen der Gesamtstruktur wird aus der Topologie ermittelt. Wenn das mittlere Schadensausmaß nicht eindeutig festgelegt werden kann, oder wenn die Material-, Geometrie- oder Lastangaben vage sind, wird im Rahmen "Weitergehender Untersuchungen" ein mathematisches Verfahren basierend auf der Fuzzy-Logik vorgeschlagen. Es filtert auch bei komplexen Ursache-Wirkungsbeziehungen die dominierende Schadensursache heraus und vermeidet, daß mit Unsicherheiten behaftete Parameter für zuverlässige Absolutwerte gehalten werden. Um den mittleren Schadensindex und daraus das Risiko zu berechnen, werden die einzelnen Schadensindizes (je nach Fehlermodus) abhängig von ihrer Bedeutung mit Wichtungsfaktoren belegt,und zusätzlich je nach Art, Bedeutung und Zuverlässigkeit der erhaltenen Information durch Gamma dividiert. Hiermit wurde ein neues Verfahren zur Analyse komplexer Versagensmechanismen vorgestellt, welches nachvollziehbare Schlußfolgerungen ermöglicht