Improving MIMO Sphere Detection Through Antenna Detection Order Scheduling

This paper proposes a novel scalable Multiple-Input Multiple-Output (MIMO) detector that does not require preprocessing to achieve good bit error rate (BER) performance. MIMO processing is a key technology in broadband wireless technologies such as 3G LTE, WiMAX, and 802.11n. Existing detectors such as Flexsphere use preprocessing before MIMO detection to improve performance. Instead of costly preprocessing, the proposed detector schedules multiple search passes, where each search pass detects the transmit stream with a different permuted detection order. By changing the number of parallel search passes, we show that this scalable detector can achieve comparable performance to Flexsphere with reduced resource requirement, or can eliminate LLR clipping and achieve BER performance within 0.25 dB of exhaustive search with increased resource requirement

Low complexity scalable MIMO sphere detection through antenna detection reordering

This paper describes a novel low complexity scalable multiple-input multiple-output (MIMO) detector that does not require preprocessing and the optimal squared l2-norm computations to achieve good bit error (BER) performance. Unlike existing detectors such as Flexsphere that use preprocessing before MIMO detection to improve performance, the proposed detector instead performs multiple search passes, where each search pass detects the transmit stream with a different permuted detection order. In addition, to reduce the number of multipliers required in the design, we use l1-norm in place of the optimal squared l2-norm. To ameliorate the BER performance loss due to l1- norm, we propose squaring then scaling the l1-norm. By changing the number of parallel search passes and using norm scaling, we show that this design achieves comparable performance to Flexsphere with reduced resource requirement or achieves BER performance close to exhaustive search with increased resource requirement.National Science Foundatio

VLSI architectures design for encoders of High Efficiency Video Coding (HEVC) standard

The growing popularity of high resolution video and the continuously increasing demands for high quality video on mobile devices are producing stronger needs for more efficient video encoder. Concerning these desires, HEVC, a newest video coding standard, has been developed by a joint team formed by ISO/IEO MPEG and ITU/T VCEG. Its design goal is to achieve a 50% compression gain over its predecessor H.264 with an equal or even higher perceptual video quality. Motion Estimation (ME) being as one of the most critical module in video coding contributes almost 50%-70% of computational complexity in the video encoder. This high consumption of the computational resources puts a limit on the performance of encoders, especially for full HD or ultra HD videos, in terms of coding speed, bit-rate and video quality. Thus the major part of this work concentrates on the computational complexity reduction and improvement of timing performance of motion estimation algorithms for HEVC standard. First, a new strategy to calculate the SAD (Sum of Absolute Difference) for motion estimation is designed based on the statistics on property of pixel data of video sequences. This statistics demonstrates the size relationship between the sum of two sets of pixels has a determined connection with the distribution of the size relationship between individual pixels from the two sets. Taking the advantage of this observation, only a small proportion of pixels is necessary to be involved in the SAD calculation. Simulations show that the amount of computations required in the full search algorithm is reduced by about 58% on average and up to 70% in the best case. Secondly, from the scope of parallelization an enhanced TZ search for HEVC is proposed using novel schemes of multiple MVPs (motion vector predictor) and shared MVP. Specifically, resorting to multiple MVPs the initial search process is performed in parallel at multiple search centers, and the ME processing engine for PUs within one CU are parallelized based on the MVP sharing scheme on CU (coding unit) level. Moreover, the SAD module for ME engine is also parallelly implemented for PU size of 32×32. Experiments indicate it achieves an appreciable improvement on the throughput and coding efficiency of the HEVC video encoder. In addition, the other part of this thesis is contributed to the VLSI architecture design for finding the first W maximum/minimum values targeting towards high speed and low hardware cost. The architecture based on the novel bit-wise AND scheme has only half of the area of the best reference solution and its critical path delay is comparable with other implementations. While the FPCG (full parallel comparison grid) architecture, which utilizes the optimized comparator-based structure, achieves 3.6 times faster on average on the speed and even 5.2 times faster at best comparing with the reference architectures. Finally the architecture using the partial sorting strategy reaches a good balance on the timing performance and area, which has a slightly lower or comparable speed with FPCG architecture and a acceptable hardware cost

LTE performance evaluation with realistic channel quality indicator feedback

In the context of mobile communications, the availability of new services and mobile applications along with the constant evolution in terminals run up the need of higher data rates. In order to fulfill such expectations, mobile operators are continually optimizing and upgrading their networks. The Long Term Evolution (LTE) of the Universal Mobile Telecommunications System (UMTS) seems to be the path to follow in a very short term. The objective of this project is to study the behaviour of the radio resource assignment in LTE under realistic conditions. The scheduling is a key process in the functioning of the radio interface. Thus, two types of schedulers can be identified, the opportunistic, where the scheduler considers the state of the radio channel to make the best allocation possible, and the non-opportunistic, where the allocation has no knowledge of the radio channel‘s state. As the opportunistic option adapts to the radio channel conditions it requires the transmission of a certain level of signalling from users informing about how the channel evolves along time. One of the objectives of this project is to evaluate the system performance under different degrees of feedback. To do this, different CQI reporting methods have been programmed and simulated. So, to achieve this objective it is obvious that a second one is necessary: program and simulate in a more realistic way the LTE radio channel. The followed methodology has been fundamentally the programming of different mathematical models and algorithms, as well as its simulation. In concrete, one of the main tasks in this work has been to extent a software platform of the research group Wicomtec to obtain more realistic results through dynamic simulations over a dynamic radio channel

Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems

206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo