Design and Development of an Affordable Haptic Robot with Force-Feedback and Compliant Actuation to Improve Therapy for Patients with Severe Hemiparesis

The study describes the design and development of a single degree-of-freedom haptic robot, Haptic Theradrive, for post-stroke arm rehabilitation for in-home and clinical use. The robot overcomes many of the weaknesses of its predecessor, the TheraDrive system, that used a Logitech steering wheel as the haptic interface for rehabilitation. Although the original TheraDrive system showed success in a pilot study, its wheel was not able to withstand the rigors of use. A new haptic robot was developed that functions as a drop-in replacement for the Logitech wheel. The new robot can apply larger forces in interacting with the patient, thereby extending the functionality of the system to accommodate low-functioning patients. A new software suite offers appreciably more options for tailored and tuned rehabilitation therapies. In addition to describing the design of the hardware and software, the paper presents the results of simulation and experimental case studies examining the system\u27s performance and usability

Shape sensing of variable stiffness soft robots using electrical impedance tomography

Soft robotic systems offer benefits over traditional rigid systems through reduced contact trauma with soft tissues and by enabling access through tortuous paths in minimally invasive surgery. However, the inherent deformability of soft robots places both a greater onus on accurate modelling of their shape, and greater challenges in realising intraoperative shape sensing. Herein we present a proprioceptive (self-sensing) soft actuator, with an electrically conductive working fluid. Electrical impedance measurements from up to six electrodes enabled tomographic reconstructions using Electrical Impedance Tomography (EIT). A new Frequency Division Multiplexed (FDM) EIT system was developed capable of measurements of 66 dB SNR with 20 ms temporal resolution. The concept was examined in two two-degree-of-freedom designs: a hydraulic hinged actuator and a pneumatic finger actuator with hydraulic beams. Both cases demonstrated that impedance measurements could be used to infer shape changes, and EIT images reconstructed during actuation showed distinct patterns with respect to each degree of freedom (DOF). Whilst there was some mechanical hysteresis observed, the repeatability of the measurements and resultant images was high. The results show the potential of FDM-EIT as a low-cost, low profile shape sensor in soft robots

A flexible sensor technology for the distributed measurement of interaction pressure

We present a sensor technology for the measure of the physical human-robot interaction pressure developed in the last years at Scuola Superiore Sant'Anna. The system is composed of flexible matrices of opto-electronic sensors covered by a soft silicone cover. This sensory system is completely modular and scalable, allowing one to cover areas of any sizes and shapes, and to measure different pressure ranges. In this work we present the main application areas for this technology. A first generation of the system was used to monitor human-robot interaction in upper- (NEUROExos; Scuola Superiore Sant'Anna) and lower-limb (LOPES; University of Twente) exoskeletons for rehabilitation. A second generation, with increased resolution and wireless connection, was used to develop a pressure-sensitive foot insole and an improved human-robot interaction measurement systems. The experimental characterization of the latter system along with its validation on three healthy subjects is presented here for the first time. A perspective on future uses and development of the technology is finally drafted

Explorations in Low-Cost Compliant Robotics

MEng thesisThis thesis presents the findings of exploratory research in low-cost compliant robotics. The most heavily leveraged trade-off is that of mechanical precision for computational power, with the hope that the price of future computation will continue to fall exponentially while the expected price of precision mechanical parts will remain relatively constant. The most novel contribution of this research is the Torsionally Compliant Elastomer Joint (TCEJ) which allows for compliance and sensing in a very small package while using extremely inexpensive components. Computational modeling of hysteresis, signal compression, and backlash are also explored to compensate for the non-idealities often found in cheap mechanical parts. Three proof-of-concept systems are described along with a set of experiments used to test their capabilities. Finally, future work is proposed that will likely shape the next generation of low-cost compliant robotics

Explorations in low-cost compliant robotics

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (p. 97-99).This thesis presents the findings of exploratory research in low-cost compliant robotics. The most heavily leveraged trade-off is that of mechanical precision for computational power, with the hope that the price of future computation will continue to fall exponentially while the expected price of precision mechanical parts will remain relatively constant. The most novel contribution of this research is the Torsionally Compliant Elastomer Joint (TCEJ) which allows for compliance and sensing in a very small package while using extremely inexpensive components. Computational modeling of hysteresis, signal compression, and backlash are also explored to compensate for the non-idealities often found in cheap mechanical parts. Three proof-of-concept systems are described along with a set of experiments used to test their capabilities. Finally, future work is proposed that will likely shape the next generation of low-cost compliant robotics.by Adam Kumpf.M.Eng

Towards an ontology for soft robots: What is soft?

The advent of soft robotics represents a profound change in the forms robots will take in the future. However, this revolutionary change has already yielded such a diverse collection of robots that attempts at defining this group do not reflect many existing ‘soft’ robots. This paper aims to address this issue by scrutinising a number of descriptions of soft robots arising from a literature review with the intention of determining a coherent meaning for soft. We also present a classification of existing soft robots to initiate the development of a soft robotic ontology. Finally, discrepancies in prescribed ranges of Young’s modulus, a frequently used criterion for the selection of soft materials, are explained and discussed. A detailed visual comparison of these ranges and supporting data is also presented

Online Recognition of Environment Properties by Using Bilateral Control

The topic of this thesis is identification of the mechanical impedance of an unknown environment. Through the use of bilateral control based on DOB and RFOB structures, position, speed and force information are gathered and analyzed while performing continuous contact with the environment. The nonlinear Hunt-Crossley model is preferred over the classic Kelvin-Voigt model. Particular attention is given to the precise recognition of contact and the detection of an occurring deformation.ope