2,094 research outputs found
Preprint: Using RF-DNA Fingerprints To Classify OFDM Transmitters Under Rayleigh Fading Conditions
The Internet of Things (IoT) is a collection of Internet connected devices
capable of interacting with the physical world and computer systems. It is
estimated that the IoT will consist of approximately fifty billion devices by
the year 2020. In addition to the sheer numbers, the need for IoT security is
exacerbated by the fact that many of the edge devices employ weak to no
encryption of the communication link. It has been estimated that almost 70% of
IoT devices use no form of encryption. Previous research has suggested the use
of Specific Emitter Identification (SEI), a physical layer technique, as a
means of augmenting bit-level security mechanism such as encryption. The work
presented here integrates a Nelder-Mead based approach for estimating the
Rayleigh fading channel coefficients prior to the SEI approach known as RF-DNA
fingerprinting. The performance of this estimator is assessed for degrading
signal-to-noise ratio and compared with least square and minimum mean squared
error channel estimators. Additionally, this work presents classification
results using RF-DNA fingerprints that were extracted from received signals
that have undergone Rayleigh fading channel correction using Minimum Mean
Squared Error (MMSE) equalization. This work also performs radio discrimination
using RF-DNA fingerprints generated from the normalized magnitude-squared and
phase response of Gabor coefficients as well as two classifiers. Discrimination
of four 802.11a Wi-Fi radios achieves an average percent correct classification
of 90% or better for signal-to-noise ratios of 18 and 21 dB or greater using a
Rayleigh fading channel comprised of two and five paths, respectively.Comment: 13 pages, 14 total figures/images, Currently under review by the IEEE
Transactions on Information Forensics and Securit
Estimation of Sparse MIMO Channels with Common Support
We consider the problem of estimating sparse communication channels in the
MIMO context. In small to medium bandwidth communications, as in the current
standards for OFDM and CDMA communication systems (with bandwidth up to 20
MHz), such channels are individually sparse and at the same time share a common
support set. Since the underlying physical channels are inherently
continuous-time, we propose a parametric sparse estimation technique based on
finite rate of innovation (FRI) principles. Parametric estimation is especially
relevant to MIMO communications as it allows for a robust estimation and
concise description of the channels. The core of the algorithm is a
generalization of conventional spectral estimation methods to multiple input
signals with common support. We show the application of our technique for
channel estimation in OFDM (uniformly/contiguous DFT pilots) and CDMA downlink
(Walsh-Hadamard coded schemes). In the presence of additive white Gaussian
noise, theoretical lower bounds on the estimation of SCS channel parameters in
Rayleigh fading conditions are derived. Finally, an analytical spatial channel
model is derived, and simulations on this model in the OFDM setting show the
symbol error rate (SER) is reduced by a factor 2 (0 dB of SNR) to 5 (high SNR)
compared to standard non-parametric methods - e.g. lowpass interpolation.Comment: 12 pages / 7 figures. Submitted to IEEE Transactions on Communicatio
An OFDM Signal Identification Method for Wireless Communications Systems
Distinction of OFDM signals from single carrier signals is highly important
for adaptive receiver algorithms and signal identification applications. OFDM
signals exhibit Gaussian characteristics in time domain and fourth order
cumulants of Gaussian distributed signals vanish in contrary to the cumulants
of other signals. Thus fourth order cumulants can be utilized for OFDM signal
identification. In this paper, first, formulations of the estimates of the
fourth order cumulants for OFDM signals are provided. Then it is shown these
estimates are affected significantly from the wireless channel impairments,
frequency offset, phase offset and sampling mismatch. To overcome these
problems, a general chi-square constant false alarm rate Gaussianity test which
employs estimates of cumulants and their covariances is adapted to the specific
case of wireless OFDM signals. Estimation of the covariance matrix of the
fourth order cumulants are greatly simplified peculiar to the OFDM signals. A
measurement setup is developed to analyze the performance of the identification
method and for comparison purposes. A parametric measurement analysis is
provided depending on modulation order, signal to noise ratio, number of
symbols, and degree of freedom of the underlying test. The proposed method
outperforms statistical tests which are based on fixed thresholds or empirical
values, while a priori information requirement and complexity of the proposed
method are lower than the coherent identification techniques
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Multiuser MIMO-OFDM for Next-Generation Wireless Systems
This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base stationβs or radio portβs coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
- β¦