13,028 research outputs found
Parametric Macromodels of Differential Drivers and Receivers
This paper addresses the modeling of differential drivers and receivers for the analog simulation of high-speed interconnection systems. The proposed models are based on mathematical expressions, whose parameters can be estimated from the transient responses of the modeled devices. The advantages of this macromodeling approach are: improved accuracy with respect to models based on simplified equivalent circuits of devices; improved numerical efficiency with respect to detailed transistor-level models of devices; hiding of the internal structure of devices; straightforward circuit interpretation; or implementations in analog mixed-signal simulators. The proposed methodology is demonstrated on example devices and is applied to the prediction of transient waveforms and eye diagrams of a typical low-voltage differential signaling (LVDS) data link
Parametric Macromodels of Differential Drivers with Pre-Emphasis
This paper discusses the extraction of behavioral models of differential drivers with pre-emphasis for the assessment of signal integrity and electromagnetic compatibility effects in multigigabit data transmission systems. A suitable model structure is derived and the procedure for its estimation from port transient waveforms is illustrated. The proposed methodology is an extension of the macromodeling based on parametric relations applied to plain differential drivers. The obtained models preserve the accuracy and efficiency strengths of behavioral parametric macromodels for conventional devices. A realistic application example involving a high-speed communication path and a 3.125 Gb/s commercial driver model with pre-emphasis is presente
Piezo-electromechanical smart materials with distributed arrays of piezoelectric transducers: Current and upcoming applications
This review paper intends to gather and organize a series of works which discuss the possibility of exploiting the mechanical properties of distributed arrays of piezoelectric transducers. The concept can be described as follows: on every structural member one can uniformly distribute an array of piezoelectric transducers whose electric terminals are to be connected to a suitably optimized electric waveguide. If the aim of such a modification is identified to be the suppression of mechanical vibrations then the optimal electric waveguide is identified to be the 'electric analog' of the considered structural member. The obtained electromechanical systems were called PEM (PiezoElectroMechanical) structures. The authors especially focus on the role played by Lagrange methods in the design of these analog circuits and in the study of PEM structures and we suggest some possible research developments in the conception of new devices, in their study and in their technological application. Other potential uses of PEMs, such as Structural Health Monitoring and Energy Harvesting, are described as well. PEM structures can be regarded as a particular kind of smart materials, i.e. materials especially designed and engineered to show a specific andwell-defined response to external excitations: for this reason, the authors try to find connection between PEM beams and plates and some micromorphic materials whose properties as carriers of waves have been studied recently. Finally, this paper aims to establish some links among some concepts which are used in different cultural groups, as smart structure, metamaterial and functional structural modifications, showing how appropriate would be to avoid the use of different names for similar concepts. © 2015 - IOS Press and the authors
Tensor Computation: A New Framework for High-Dimensional Problems in EDA
Many critical EDA problems suffer from the curse of dimensionality, i.e. the
very fast-scaling computational burden produced by large number of parameters
and/or unknown variables. This phenomenon may be caused by multiple spatial or
temporal factors (e.g. 3-D field solvers discretizations and multi-rate circuit
simulation), nonlinearity of devices and circuits, large number of design or
optimization parameters (e.g. full-chip routing/placement and circuit sizing),
or extensive process variations (e.g. variability/reliability analysis and
design for manufacturability). The computational challenges generated by such
high dimensional problems are generally hard to handle efficiently with
traditional EDA core algorithms that are based on matrix and vector
computation. This paper presents "tensor computation" as an alternative general
framework for the development of efficient EDA algorithms and tools. A tensor
is a high-dimensional generalization of a matrix and a vector, and is a natural
choice for both storing and solving efficiently high-dimensional EDA problems.
This paper gives a basic tutorial on tensors, demonstrates some recent examples
of EDA applications (e.g., nonlinear circuit modeling and high-dimensional
uncertainty quantification), and suggests further open EDA problems where the
use of tensor computation could be of advantage.Comment: 14 figures. Accepted by IEEE Trans. CAD of Integrated Circuits and
System
Recommended from our members
Variable domain transformation for linear PAC analysis of mixed-signal systems
This paper describes a method to perform linear AC analysis on mixed-signal systems which appear strongly nonlinear in the voltage domain but are linear in other variable domains. Common circuits like phase/delay-locked loops and duty-cycle correctors fall into this category, since they are designed to be linear with respect to phases, delays, and duty-cycles of the input and output clocks, respectively. The method uses variable domain translators to change the variables to which the AC perturbation is applied and from which the AC response is measured. By utilizing the efficient periodic AC (PAC) analysis available in commercial RF simulators, the circuitâs linear transfer function in the desired variable domain can be characterized without relying on extensive transient simulations. Furthermore, the variable domain translators enable the circuits to be macromodeled as weakly-nonlinear systems in the chosen domain and then converted to voltage-domain models, instead of being modeled as strongly-nonlinear systems directly
Communication Subsystems for Emerging Wireless Technologies
The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels
- âŠ