5,806 research outputs found
Bandwidth EfïŹcient Root Nyquist Pulses for Optical Intensity Channels
Indoor diffuse optical intensity channels are bandwidth constrained due to the multiple reflected paths between the transmitter and the receiver which cause considerable inter-symbol interference (ISI). The transmitted signal amplitude is inherently non-negative, being a light intensity signal. All optical intensity root Nyquist pulses are time-limited to a single symbol interval which eliminates the possibility of finding bandlimited root Nyquist pulses. However, potential exists to design bandwidth efficient pulses. This paper investigates the modified hermite polynomial functions and prolate spheroidal wave functions as candidate waveforms for designing spectrally efficient optical pulses. These functions yield orthogonal pulses which have constant pulse duration irrespective of the order of the function, making them ideal for designing an ISI free pulse. Simulation results comparing the two pulses and challenges pertaining to their design and implementation are discussed
Application of Expurgated PPM to Indoor Visible Light Communications - Part I: Single-User Systems
Visible light communications (VLC) in indoor environments suffer from the
limited bandwidth of LEDs as well as from the inter-symbol interference (ISI)
imposed by multipath. In this work, transmission schemes to improve the
performance of indoor optical wireless communication (OWC) systems are
introduced. Expurgated pulse-position modulation (EPPM) is proposed for this
application since it can provide a wide range of peak to average power ratios
(PAPR) needed for dimming of the indoor illumination. A correlation decoder
used at the receiver is shown to be optimal for indoor VLC systems, which are
shot noise and background-light limited. Interleaving applied on EPPM in order
to decrease the ISI effect in dispersive VLC channels can significantly
decrease the error probability. The proposed interleaving technique makes EPPM
a better modulation option compared to PPM for VLC systems or any other
dispersive OWC system. An overlapped EPPM pulse technique is proposed to
increase the transmission rate when bandwidth-limited white LEDs are used as
sources.Comment: Journal of Lightwave Technolog
Optical Time-Frequency Packing: Principles, Design, Implementation, and Experimental Demonstration
Time-frequency packing (TFP) transmission provides the highest achievable
spectral efficiency with a constrained symbol alphabet and detector complexity.
In this work, the application of the TFP technique to fiber-optic systems is
investigated and experimentally demonstrated. The main theoretical aspects,
design guidelines, and implementation issues are discussed, focusing on those
aspects which are peculiar to TFP systems. In particular, adaptive compensation
of propagation impairments, matched filtering, and maximum a posteriori
probability detection are obtained by a combination of a butterfly equalizer
and four 8-state parallel Bahl-Cocke-Jelinek-Raviv (BCJR) detectors. A novel
algorithm that ensures adaptive equalization, channel estimation, and a proper
distribution of tasks between the equalizer and BCJR detectors is proposed. A
set of irregular low-density parity-check codes with different rates is
designed to operate at low error rates and approach the spectral efficiency
limit achievable by TFP at different signal-to-noise ratios. An experimental
demonstration of the designed system is finally provided with five
dual-polarization QPSK-modulated optical carriers, densely packed in a 100 GHz
bandwidth, employing a recirculating loop to test the performance of the system
at different transmission distances.Comment: This paper has been accepted for publication in the IEEE/OSA Journal
of Lightwave Technolog
A fast-initializing digital equalizer with on-line tracking for data communications
A theory is developed for a digital equalizer for use in reducing intersymbol interference (ISI) on high speed data communications channels. The equalizer is initialized with a single isolated transmitter pulse, provided the signal-to-noise ratio (SNR) is not unusually low, then switches to a decision directed, on-line mode of operation that allows tracking of channel variations. Conditions for optimal tap-gain settings are obtained first for a transversal equalizer structure by using a mean squared error (MSE) criterion, a first order gradient algorithm to determine the adjustable equalizer tap-gains, and a sequence of isolated initializing pulses. Since the rate of tap-gain convergence depends on the eigenvalues of a channel output correlation matrix, convergence can be improved by making a linear transformation on to obtain a new correlation matrix
Improving the Spectral Efficiency of Nonlinear Satellite Systems through Time-Frequency Packing and Advanced Processing
We consider realistic satellite communications systems for broadband and
broadcasting applications, based on frequency-division-multiplexed linear
modulations, where spectral efficiency is one of the main figures of merit. For
these systems, we investigate their ultimate performance limits by using a
framework to compute the spectral efficiency when suboptimal receivers are
adopted and evaluating the performance improvements that can be obtained
through the adoption of the time-frequency packing technique. Our analysis
reveals that introducing controlled interference can significantly increase the
efficiency of these systems. Moreover, if a receiver which is able to account
for the interference and the nonlinear impairments is adopted, rather than a
classical predistorter at the transmitter coupled with a simpler receiver, the
benefits in terms of spectral efficiency can be even larger. Finally, we
consider practical coded schemes and show the potential advantages of the
optimized signaling formats when combined with iterative detection/decoding.Comment: 8 pages, 8 figure
Non-data-aided frequency offset and symbol timing estimation for binary CPM: performance bounds
The use of (spectrally efficient) CPM modulations may lead to a serious performance degradation of the classical non-data-aided (NDA) frequency and timing estimators due to the presence of self noise. The actual performance of these estimators is usually much worse than that predicted by the classical modified Cramer-Rao bound. We apply some well known results in the field of signal processing to these two important problems of synchronization. In particular we propose and explain the meaning of the unconditional CRB in the synchronization task. Simulation results for MSK and GMSK, along with the performance of some classical and previously proposed synchronizers, show that the proposed bound (along with the MCRB) is useful for a better prediction of the ultimate performance of the NDA estimators.Peer ReviewedPostprint (published version
A Suboptimal Receiver with Turbo Block Coding for Ultra-Wideband Communications
In this paper, the performance of adaptive equalization and turbo product coding is investigated for pulse-based UWB communications in short-range indoor environments. The sensitivity of adaptive LMS linear and nonlinear (decision-feedback) equalizers with respect to the number of training symbols and number of taps is considered. To reduce the error performance variation with respect to changing channel conditions, a turbo product code (TPC) with two component (31,26,3) Hamming codes is proposed. We report simulation results showing that channel coding not only improves error performance, but also reduces significantly the sensitivity of UWB systems in short-range indoor wireless communications
Performance of the wavelet-transform-neural network based receiver for DPIM in diffuse indoor optical wireless links in presence of artificial light interference
Artificial neural network (ANN) has application in communication engineering in diverse areas such as channel equalization, channel modeling, error control code because of its capability of nonlinear processing, adaptability, and parallel processing. On the other hand, wavelet transform (WT) with both the time and the frequency resolution provides the exact representation of signal in both domains. Applying these signal processing tools for channel compensation and noise reduction can provide an enhanced performance compared to the traditional tools. In this paper, the slot error rate (SER) performance of digital pulse interval modulation (DPIM) in diffuse indoor optical wireless (OW) links subjected to the artificial light interference (ALI) is reported with new receiver structure based on the discrete WT (DWT) and ANN. Simulation results show that the DWT-ANN based receiver is very effective in reducing the effect of multipath induced inter-symbol interference (ISI) and ALI
Design of FIR digital filters for pulse shaping and channel equalization using time-domain optimization
Three algorithms are developed for designing finite impulse response digital filters to be used for pulse shaping and channel equalization. The first is the Minimax algorithm which uses linear programming to design a frequency-sampling filter with a pulse shape that approximates the specification in a minimax sense. Design examples are included which accurately approximate a specified impulse response with a maximum error of 0.03 using only six resonators. The second algorithm is an extension of the Minimax algorithm to design preset equalizers for channels with known impulse responses. Both transversal and frequency-sampling equalizer structures are designed to produce a minimax approximation of a specified channel output waveform. Examples of these designs are compared as to the accuracy of the approximation, the resultant intersymbol interference (ISI), and the required transmitted energy. While the transversal designs are slightly more accurate, the frequency-sampling designs using six resonators have smaller ISI and energy values
- âŠ