Secure Video Streaming Using Dedicated Hardware

Purpose: The purpose of this article is to present a system that enhances the security, efficiency, and reconfigurability of an Internet-of-Things (IoT) system used for surveillance and monitoring. Methods: A Multi-Processor System-On-Chip (MPSoC) composed of Central Processor Unit (CPU) and Field-Programmable Gate Array (FPGA) is proposed for increasing the security and the frame rate of a smart IoT edge device. The private encryption key is safely embedded in the FPGA unit to avoid being exposed in the Random Access Memory (RAM). This allows the edge device to securely store and authenticate the key, protecting the data transmitted from the same Integrated Circuit (IC). Additionally, the edge device can simultaneously publish and route a camera stream using a lightweight communication protocol, achieving a frame rate of 14 frames per Second (fps). The performance of the MPSoC is compared to a NVIDIA Jetson Nano (NJN) and a Raspberry Pi 4 (RPI4) and it is found that the RPI4 is the most cost-effective solution but with lower frame rate, the NJN is the fastest because it can achieve higher frame-rate but it is not secure, and the MPSoC is the optimal solution because it offers a balanced frame rate and it is secure because it never exposes the secure key into the memory. Results: The proposed system successfully addresses the challenges of security, scalability, and efficiency in an IoT system used for surveillance and monitoring. The encryption key is securely stored and authenticated, and the edge device is able to simultaneously publish and route a camera stream feed high-definition images at 14 fps

10281 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 11.07.10 to 16.07.10, Dagstuhl Seminar 10281 ``Dynamically Reconfigurable Architectures \u27\u27 was held in Schloss Dagstuhl~--~Leibniz Center for Informatics. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

Design and Validation for FPGA Trust under Hardware Trojan Attacks

Field programmable gate arrays (FPGAs) are being increasingly used in a wide range of critical applications, including industrial, automotive, medical, and military systems. Since FPGA vendors are typically fabless, it is more economical to outsource device production to off-shore facilities. This introduces many opportunities for the insertion of malicious alterations of FPGA devices in the foundry, referred to as hardware Trojan attacks, that can cause logical and physical malfunctions during field operation. The vulnerability of these devices to hardware attacks raises serious security concerns regarding hardware and design assurance. In this paper, we present a taxonomy of FPGA-specific hardware Trojan attacks based on activation and payload characteristics along with Trojan models that can be inserted by an attacker. We also present an efficient Trojan detection method for FPGA based on a combined approach of logic-testing and side-channel analysis. Finally, we propose a novel design approach, referred to as Adapted Triple Modular Redundancy (ATMR), to reliably protect against Trojan circuits of varying forms in FPGA devices. We compare ATMR with the conventional TMR approach. The results demonstrate the advantages of ATMR over TMR with respect to power overhead, while maintaining the same or higher level of security and performances as TMR. Further improvement in overhead associated with ATMR is achieved by exploiting reconfiguration and time-sharing of resources

Lessons learned from the design of a mobile multimedia system in the Moby Dick project

Recent advances in wireless networking technology and the exponential development of semiconductor technology have engendered a new paradigm of computing, called personal mobile computing or ubiquitous computing. This offers a vision of the future with a much richer and more exciting set of architecture research challenges than extrapolations of the current desktop architectures. In particular, these devices will have limited battery resources, will handle diverse data types, and will operate in environments that are insecure, dynamic and which vary significantly in time and location. The research performed in the MOBY DICK project is about designing such a mobile multimedia system. This paper discusses the approach made in the MOBY DICK project to solve some of these problems, discusses its contributions, and accesses what was learned from the project

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Virtualized Reconfigurable Resources and Their Secured Provision in an Untrusted Cloud Environment

The cloud computing business grows year after year. To keep up with increasing demand and to offer more services, data center providers are always searching for novel architectures. One of them are FPGAs, reconfigurable hardware with high compute power and energy efficiency. But some clients cannot make use of the remote processing capabilities. Not every involved party is trustworthy and the complex management software has potential security flaws. Hence, clients’ sensitive data or algorithms cannot be sufficiently protected. In this thesis state-of-the-art hardware, cloud and security concepts are analyzed and com- bined. On one side are reconfigurable virtual FPGAs. They are a flexible resource and fulfill the cloud characteristics at the price of security. But on the other side is a strong requirement for said security. To provide it, an immutable controller is embedded enabling a direct, confidential and secure transfer of clients’ configurations. This establishes a trustworthy compute space inside an untrusted cloud environment. Clients can securely transfer their sensitive data and algorithms without involving vulnerable software or a data center provider. This concept is implemented as a prototype. Based on it, necessary changes to current FPGAs are analyzed. To fully enable reconfigurable yet secure hardware in the cloud, a new hybrid architecture is required.Das Geschäft mit dem Cloud Computing wächst Jahr für Jahr. Um mit der steigenden Nachfrage mitzuhalten und neue Angebote zu bieten, sind Betreiber von Rechenzentren immer auf der Suche nach neuen Architekturen. Eine davon sind FPGAs, rekonfigurierbare Hardware mit hoher Rechenleistung und Energieeffizienz. Aber manche Kunden können die ausgelagerten Rechenkapazitäten nicht nutzen. Nicht alle Beteiligten sind vertrauenswürdig und die komplexe Verwaltungssoftware ist anfällig für Sicherheitslücken. Daher können die sensiblen Daten dieser Kunden nicht ausreichend geschützt werden. In dieser Arbeit werden modernste Hardware, Cloud und Sicherheitskonzept analysiert und kombiniert. Auf der einen Seite sind virtuelle FPGAs. Sie sind eine flexible Ressource und haben Cloud Charakteristiken zum Preis der Sicherheit. Aber auf der anderen Seite steht ein hohes Sicherheitsbedürfnis. Um dieses zu bieten ist ein unveränderlicher Controller eingebettet und ermöglicht eine direkte, vertrauliche und sichere Übertragung der Konfigurationen der Kunden. Das etabliert eine vertrauenswürdige Rechenumgebung in einer nicht vertrauenswürdigen Cloud Umgebung. Kunden können sicher ihre sensiblen Daten und Algorithmen übertragen ohne verwundbare Software zu nutzen oder den Betreiber des Rechenzentrums einzubeziehen. Dieses Konzept ist als Prototyp implementiert. Darauf basierend werden nötige Änderungen von modernen FPGAs analysiert. Um in vollem Umfang eine rekonfigurierbare aber dennoch sichere Hardware in der Cloud zu ermöglichen, wird eine neue hybride Architektur benötigt