On secure communication in integrated internet and heterogeneous multi-hop wireless networks.

Integration of the Internet with a Cellular Network, WMAN, WLAN, and MANET presents an exceptional promise by having co-existence of conventional WWANs/WMANs/WLANs with wireless ad hoc networks to provide ubiquitous communication. We call such integrated networks providing internet accessibility for mobile users as heterogeneous multi-hop wireless networks where the Internet and wireless infrastructure such as WLAN access points (APs) and base stations (BSs) constitute the backbone for various emerging wireless networks (e.g., multi-hop WLAN and ad hoc networks. Earlier approaches for the Internet connectivity either provide only unidirectional connectivity for ad hoc hosts or cause high overhead as well as delay for providing full bi-directional connections. In this dissertation, a new protocol is proposed for integrated Internet and ad hoc networks for supporting bi-directional global connectivity for ad hoc hosts. In order to provide efficient mobility management for mobile users in an integrated network, a mobility management protocol called multi-hop cellular IP (MCIP) has been proposed to provide a micro-mobility management framework for heterogeneous multi-hop network. The micro-mobility is achieved by differentiating the local domain from the global domain. At the same time, the MCIP protocol extends Mobile IP protocol for providing macro-mobility support between local domains either for single hop MSs or multi-hop MSs. In the MCIP protocol, new location and mobility management approaches are developed for tracking mobile stations, paging, and handoff management. This dissertation also provides a security protocol for integrated Internet and MANET to establish distributed trust relationships amongst mobile infrastructures. This protocol protects communication between two mobile stations against the attacks either from the Internet side or from wireless side. Moreover, a secure macro/micro-mobility protocol (SM3P) have been introduced and evaluated for preventing mobility-related attacks either for single-hop MSs or multi-hop MSs. In the proposed SM3P, mobile IP security has been extended for supporting macro-mobility across local domains through the process of multi-hop registration and authentication. In a local domain, a certificate-based authentication achieves the effective routing and micro-mobility protection from a range of potential security threats

A cross-layer middleware architecture for time and safety critical applications in MANETs

Mobile Ad hoc Networks (MANETs) can be deployed instantaneously and adaptively, making them highly suitable to military, medical and disaster-response scenarios. Using real-time applications for provision of instantaneous and dependable communications, media streaming, and device control in these scenarios is a growing research field. Realising timing requirements in packet delivery is essential to safety-critical real-time applications that are both delay- and loss-sensitive. Safety of these applications is compromised by packet loss, both on the network and by the applications themselves that will drop packets exceeding delay bounds. However, the provision of this required Quality of Service (QoS) must overcome issues relating to the lack of reliable existing infrastructure, conservation of safety-certified functionality. It must also overcome issues relating to the layer-2 dynamics with causal factors including hidden transmitters and fading channels. This thesis proposes that bounded maximum delay and safety-critical application support can be achieved by using cross-layer middleware. Such an approach benefits from the use of established protocols without requiring modifications to safety-certified ones. This research proposes ROAM: a novel, adaptive and scalable cross-layer Real-time Optimising Ad hoc Middleware framework for the provision and maintenance of performance guarantees in self-configuring MANETs. The ROAM framework is designed to be scalable to new optimisers and MANET protocols and requires no modifications of protocol functionality. Four original contributions are proposed: (1) ROAM, a middleware entity abstracts information from the protocol stack using application programming interfaces (APIs) and that implements optimisers to monitor and autonomously tune conditions at protocol layers in response to dynamic network conditions. The cross-layer approach is MANET protocol generic, using minimal imposition on the protocol stack, without protocol modification requirements. (2) A horizontal handoff optimiser that responds to time-varying link quality to ensure optimal and most robust channel usage. (3) A distributed contention reduction optimiser that reduces channel contention and related delay, in response to detection of the presence of a hidden transmitter. (4) A feasibility evaluation of the ROAM architecture to bound maximum delay and jitter in a comprehensive range of ns2-MIRACLE simulation scenarios that demonstrate independence from the key causes of network dynamics: application setting and MANET configuration; including mobility or topology. Experimental results show that ROAM can constrain end-to-end delay, jitter and packet loss, to support real-time applications with critical timing requirements

Smart handoff technique for internet of vehicles communication using dynamic edge-backup node

© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin

Mobile-IP ad-hoc network MPLS-based with QoS support.

The support for Quality of Service (QoS) is the main focus of this thesis. Major issues and challenges for Mobile-IP Ad-Hoc Networks (MANETs) to support QoS in a multi-layer manner are considered discussed and investigated through simulation setups. Different parameters contributing to the subjective measures of QoS have been considered and consequently, appropriate testbeds were formed to measure these parameters and compare them to other schemes to check for superiority. These parameters are: Maximum Round-Trip Delay (MRTD), Minimum Bandwidth Guaranteed (MBG), Bit Error Rate (BER), Packet Loss Ratio (PER), End-To-End Delay (ETED), and Packet Drop Ratio (PDR) to name a few. For network simulations, NS-II (Network Simulator Version II) and OPNET simulation software systems were used.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .A355. Source: Masters Abstracts International, Volume: 44-03, page: 1444. Thesis (M.Sc.)--University of Windsor (Canada), 2005

PMSS: Producer Mobility Support Scheme Optimization with RWP Mobility Model in Named Data Networking

Abstract: The movement pattern of mobile producer plays an important role in mobility performance analysis of the wireless and mobile network. However, the producer mobility behavior is directly affecting the handoff latency and signaling overhead cost. Many researchers provide analytical investigation to analyze and solve the handoff problems and compared with the simulation result. To justify between simulation and analytical investigation, movement behavior of mobile node needs to be included in the analytical investigation to make it possible to compare with the simulation-based result. This paper incorporated Random WayPoint Mobility (RWPM) model, to determine the behavior of mobile producer, for analytical solution of producer mobility support in NDN. In this paper, we introduce mobility Interest packets to conveyed new prefix or location of mobile producer, a broadcasting strategy to facilitate the handoff process and the immobile anchor router was modified to perform a dual function that is, tagging of anchors and broadcasting of tagged mobility Interest packets. The performance analysis for mobile producer behavior and handoff latency shows that our proposed Producer Mobility Support Scheme (PMSS) reduces handoff latency compared to DNS-like and Home Agent routing approach

An enhanced bridged-based multi-hop wireless network implementation

Proceedings of: 5th Annual ICST Wireless Internet Conference (WICON 2010), 1-3 March 2010, SingaporeIn this paper an enhanced Layer-2 multi-hop wireless network implementation for Infrastructure based Wireless Mesh Networks is presented. This work combines the flexibility of Layer-2 Wireless Bridging with the dynamic self-configuring capabilities of MANET routing. The main contribution of this paper is an investigation of the issues encountered when applying a pure bridging based solution to wireless multi-hop networks and the development of several mechanisms to overcome these problems. This work was implemented and deployed in a real testbed environment using Routerboard hardware and utilising a number of open-source network tools in accordance with the needs of our platform. The developed testbed incorporates self-healing and self-configuration features without requiring a traditional MANET routing protocol. Instead the 802.11 beacon frames sent by the Access Points were extended with link information to allow optimal construction of the mesh topology. Results are presented which demonstrate the automated topology construction mechanism. Further results also show the enhancements made to the normal 802.11 Layer-2 mobility mechanism.European Community's Seventh Framework ProgramPublicad

Design of a UMTS/GPRS Assisted Mesh Network (UAMN)

Wireless Mesh or multi-hop networks (WMNs) are well known thanks to its simplicity on deployment and the lack of infrastructure. These two advantages come with some drawbacks. WMNs have limitations with the support of Quality of Service (QoS), they do not assure coverage or even connectivity, and security, management and monitoring are not considered key requirements. In order to benefit of mesh networks and use them as an operator graded network, it is necessary to either improve mesh networks to fulfill all these requirements or use an alternative network that offers full availability, connectivity and security to assist the mesh network. Considering the two options, the second is the one selected making use of GPRS/UMTS as an assistant network. The document describes a set of requirements and the design of the functionalities needed to build an operator graded network using the cellular GPRS/UMTS. The aspects covered in the design are: security, quality of service, mobility, self configuration and optimization. The last point, optimization, is not directly involved with mesh networking, but it is an improvement easy to achieve when using a gateway node to access the Internet through a GPRS/UMTS connection. The design of the solution not only considers functionality, but also feasibility employing of the shelve elements. The mesh nodes and gateways are built on top of Linux operating system with the aim to reuse previous results and open source software. The final objective of the project is to build a usable system to be used as a proof of concept.Peer Reviewe