335 research outputs found

    Open, Closed, and Shared Access Femtocells in the Downlink

    Full text link
    A fundamental choice in femtocell deployments is the set of users which are allowed to access each femtocell. Closed access restricts the set to specifically registered users, while open access allows any mobile subscriber to use any femtocell. Which one is preferable depends strongly on the distance between the macrocell base station (MBS) and femtocell. The main results of the paper are lemmas which provide expressions for the SINR distribution for various zones within a cell as a function of this MBS-femto distance. The average sum throughput (or any other SINR-based metric) of home users and cellular users under open and closed access can be readily determined from these expressions. We show that unlike in the uplink, the interests of home and cellular users are in conflict, with home users preferring closed access and cellular users preferring open access. The conflict is most pronounced for femtocells near the cell edge, when there are many cellular users and fewer femtocells. To mitigate this conflict, we propose a middle way which we term shared access in which femtocells allocate an adjustable number of time-slots between home and cellular users such that a specified minimum rate for each can be achieved. The optimal such sharing fraction is derived. Analysis shows that shared access achieves at least the overall throughput of open access while also satisfying rate requirements, while closed access fails for cellular users and open access fails for the home user.Comment: 26 pages, 8 figures, Submitted to IEEE Transactions on Wireless Communication

    Modeling and Optimization of Next-Generation Wireless Access Networks

    Get PDF
    The ultimate goal of the next generation access networks is to provide all network users, whether they are fixed or mobile, indoor or outdoor, with high data rate connectivity, while ensuring a high quality of service. In order to realize this ambitious goal, delay, jitter, error rate and packet loss should be minimized: a goal that can only be achieved through integrating different technologies, including passive optical networks, 4th generation wireless networks, and femtocells, among others. This thesis focuses on medium access control and physical layers of future networks. In this regard, the first part of this thesis discusses techniques to improve the end-to-end quality of service in hybrid optical-wireless networks. In these hybrid networks, users are connected to a wireless base station that relays their data to the core network through an optical connection. Hence, by integrating wireless and optical parts of these networks, a smart scheduler can predict the incoming traffic to the optical network. The prediction data generated herein is then used to propose a traffic-aware dynamic bandwidth assignment algorithm for reducing the end-to-end delay. The second part of this thesis addresses the challenging problem of interference management in a two-tier macrocell/femtocell network. A high quality, high speed connection for indoor users is ensured only if the network has a high signal to noise ratio. A requirement that can be fulfilled with using femtocells in cellular networks. However, since femtocells generate harmful interference to macrocell users in proximity of them, careful analysis and realistic models should be developed to manage the introduced interference. Thus, a realistic model for femtocell interference outside suburban houses is proposed and several performance measures, e.g., signal to interference and noise ratio and outage probability are derived mathematically for further analysis. The quality of service of cellular networks can be degraded by several factors. For example, in industrial environments, simultaneous fading and strong impulsive noise significantly deteriorate the error rate performance. In the third part of this thesis, a technique to improve the bit error rate of orthogonal frequency division multiplexing systems in industrial environments is presented. This system is the most widely used technology in next-generation networks, and is very susceptible to impulsive noise, especially in fading channels. Mathematical analysis proves that the proposed method can effectively mitigate the degradation caused by impulsive noise and significantly improve signal to interference and noise ratio and bit error rate, even in frequency-selective fading channels

    Green Femtocell Based on UWB Technologies

    Get PDF

    From fixed to mobile femtocells in LTE systems: issues and challenges

    Get PDF
    This paper investigates the concept of Mobile Femtocell which is the extension of implementing Mobile Relays and Fixed Femtocells. Mobile Femtocells can be deployed in public transportation vehicles such as trains, buses or private cars that form its own cell inside vehicles to serve vehicular and mobile User Equipments. This study intends to help cell-edge users to have better signal strength. An investigation into Long Term Evolution cell-edge users' performance is being conducted by investigating the deployment of Mobile Femtocells in LTE system. The throughput for cell edge users can be improved by deploying Fixed/Mobile Femtocells. This paper is considering several scenarios namely; Fixed Femtocells with Fixed users, Mobile Femtocells with fixed users, Fixed Femtocells with mobile users and Finally Mobile Femtocells with mobile users. The achieved results via Matlab simulation showed that Mobile Femtocells' users have enjoyed better Quality of Services than Fixed Femtocells' users. The improved performance has been noticed through the improvement of the Mobile Femtocells UEs' spectral efficiency, throughput and SINR over the Fixed Femtocells' users

    Mitigation of Redundant Handovers to Femtocells by Estimation of throughput Gain

    Get PDF

    OFDMA Femtocells: A Roadmap on Interference Avoidance

    Get PDF
    [EN] OFDMA femtocells have been pointed Out by the industry as a good solution not only to overcome the indoor coverage problem but also to deal with the growth of traffic within macrocells. However, the deployment of a new femtocell layer may have an undesired impact on the performance of the macrocell layer. The allocation of spectrum resources and the avoidance of electromagnetic interference are some of the more Urgent challenges that operators face before femtocells become widely deployed. In this article a coverage and interference analysis based on a realistic OFDMA macro/femtocell scenario is provided, as well as some guidelines on how the spectrum allocation and interference mitigation problems can be approached in these networks. Special attention is paid to the use Of self-configuration and self-optimization techniques for the avoidance of interference.This work is supported by the EU FP6 RAN-PLAN-HEC project on 3G/4G Radio Access Network Design under grant number MEST-CT2005-020958.López-Pérez, D.; Valcarce, A.; De La Roche, G.; Zhang, J. (2009). OFDMA Femtocells: A Roadmap on Interference Avoidance. IEEE Communications Magazine. 47(9):41-48. https://doi.org/10.1109/MCOM.2009.5277454414847

    Small Cells for Broadband Internet Access in Low-Income Suburban Areas in Emerging Market Environments

    Get PDF
    Mobile broadband technologies are providing the best and most commonly used broadband connectivity in many emerging markets. In some regions such as Africa, mobile networks provide the only feasible ways for extending the socio-economic benefits of broadband Internet access to the masses. The use of small cell technologies, like femtocells provide an attractive solution for such areas as femtocells are most cost – effective option for coverage and capacity expansion. Furthermore, femtocells are operator managed access points which can be easily deployed and operated by the end user. It is well known that increased densification of cell sites is the most effective means for broadband mobile network capacity and coverage enhancements. However, cell densification through adding new macrocell sites by operators is usually a costly option. Therefore, this thesis will investigate methods to achieve mobile broadband capacity and coverage enhancements in low – income informal settlements or slum area, through more cost – effective cell densification using femtocells. Moreover this thesis will validate the performance gains of small cell concept for the case study through extensive simulations. The impacts of femtocell in the network, the performance gain from femtocell and gain provided by different deployment strategies have been studied. Simulation results highlight the potential benefits of using femtocells in the network for extended broadband connectivity. With the femto increment the network performance increases up to a great extent

    Techno-economical Analysis of Indoor Enterprise Solutions

    Get PDF
    corecore