21 research outputs found

    High-speed biped walking using swinging-arms based on principle of up-and-down wobbling mass

    Get PDF
    In this paper, we propose a novel speeding-up method for biped walking using a swinging-arms motion based on the principle of an up-and-down wobbling mass. We have shown that biped robots with a wobbling mass can achieve fast walking using an active up-and-down motion of the wobbling mass. We have also shown that the active up-and-down motion increases walking speed of biped robots. We apply this principle to a biped robot with two linked arms like humans for achieving high-speed limit cycle walking. We show that the proposed method achieves high-speed limit cycle walking of biped robots with arms.2015 IEEE International Conference on Robotics and Automation (ICRA), 26-30 May 2015, Seattle, WA, US

    Effect of the Dynamics of a Horizontally Wobbling Mass on Biped Walking Performance

    Full text link
    We have developed biped robots with a passive dynamic walking mechanism. This study proposes a compass model with a wobbling mass connected to the upper body and oscillating in the horizontal direction to clarify the influence of the horizontal dynamics of the upper body on bipedal walking. The limit cycles of the model were numerically searched, and their stability and energy efficiency was investigated. Several qualitatively different limit cycles were obtained depending mainly on the spring constant that supports the wobbling mass. Specific types of solutions decreased the stability while reducing the risk of accidental falling and improving the energy efficiency. The obtained results were attributed to the wobbling mass moving in the opposite direction to the upper body, thereby preventing large changes in acceleration and deceleration while walking. The relationship between the locomotion of the proposed model and the actual biped robot and human gaits was investigated.Comment: 6 pages, 8 figures, accepted to IEEE International Conference on Robotics and Automation (ICRA 2023

    Analysis of fast bipedal walking using mechanism of actively controlled wobbling mass

    Get PDF
    In this study, a novel approach was developed to achieve fast bipedal walking by using an actively controlled wobbling mass. Bipedal robots capable of achieving energy efficient limit cycle walking have been developed, and researchers have studied methods to increase their walking speed. When humans walk, their arm swinging is coordinated with the walking phases, generating a regular symmetrical motion about the torso. The bipedal robots with a wobbling mass in the torso mimicked the arm swinging by the proposed control method. We demonstrated that the proposed method is capable of increasing the bipedal walking speed

    Asymmetric swing-leg motions for speed-up of biped walking

    Get PDF
    This study presents a novel swing-leg control strategy for speed-up of biped robot walking. The trajectory of tip of the swing-leg is asymmetric at the center line of the torso in the sagittal plane for this process. A methodology is proposed that enables robots to achieve the synchronized asymmetric swing-leg motions with the stance-leg angle to accelerate their walking speed. The effectiveness of the proposed method was simulated using numerical methods

    High-Speed Biped Walking Using Swinging-Arms Based on Principle of Up-and-Down Wobbling Mass

    No full text
    In this paper, we propose a novel speeding-up method for biped walking using a swinging-arms motion based on the principle of an up-and-down wobbling mass. We have shown that biped robots with a wobbling mass can achieve fast walking using an active up-and-down motion of the wobbling mass. We have also shown that the active up-and-down motion increases walking speed of biped robots. We apply this principle to a biped robot with two linked arms like humans for achieving high-speed limit cycle walking. We show that the proposed method achieves high-speed limit cycle walking of biped robots with arms.2015 IEEE International Conference on Robotics and Automation (ICRA), 26-30 May 2015, Seattle, WA, US

    Humanoid Robot Soccer Locomotion and Kick Dynamics: Open Loop Walking, Kicking and Morphing into Special Motions on the Nao Robot

    Get PDF
    Striker speed and accuracy in the RoboCup (SPL) international robot soccer league is becoming increasingly important as the level of play rises. Competition around the ball is now decided in a matter of seconds. Therefore, eliminating any wasted actions or motions is crucial when attempting to kick the ball. It is common to see a discontinuity between walking and kicking where a robot will return to an initial pose in preparation for the kick action. In this thesis we explore the removal of this behaviour by developing a transition gait that morphs the walk directly into the kick back swing pose. The solution presented here is targeted towards the use of the Aldebaran walk for the Nao robot. The solution we develop involves the design of a central pattern generator to allow for controlled steps with realtime accuracy, and a phase locked loop method to synchronise with the Aldebaran walk so that precise step length control can be activated when required. An open loop trajectory mapping approach is taken to the walk that is stabilized statically through the use of a phase varying joint holding torque technique. We also examine the basic princples of open loop walking, focussing on the commonly overlooked frontal plane motion. The act of kicking itself is explored both analytically and empirically, and solutions are provided that are versatile and powerful. Included as an appendix, the broader matter of striker behaviour (process of goal scoring) is reviewed and we present a velocity control algorithm that is very accurate and efficient in terms of speed of execution

    Adaptive motion synthesis and motor invariant theory.

    Get PDF
    Generating natural-looking motion for virtual characters is a challenging research topic. It becomes even harder when adapting synthesized motion to interact with the environment. Current methods are tedious to use, computationally expensive and fail to capture natural looking features. These difficulties seem to suggest that artificial control techniques are inferior to their natural counterparts. Recent advances in biology research point to a new motor control principle: utilizing the natural dynamics. The interaction of body and environment forms some patterns, which work as primary elements for the motion repertoire: Motion Primitives. These elements serve as templates, tweaked by the neural system to satisfy environmental constraints or motion purposes. Complex motions are synthesized by connecting motion primitives together, just like connecting alphabets to form sentences. Based on such ideas, this thesis proposes a new dynamic motion synthesis method. A key contribution is the insight into dynamic reason behind motion primitives: template motions are stable and energy efficient. When synthesizing motions from templates, valuable properties like stability and efficiency should be perfectly preserved. The mathematical formalization of this idea is the Motor Invariant Theory and the preserved properties are motor invariant In the process of conceptualization, newmathematical tools are introduced to the research topic. The Invariant Theory, especially mathematical concepts of equivalence and symmetry, plays a crucial role. Motion adaptation is mathematically modelled as topological conjugacy: a transformation which maintains the topology and results in an analogous system. The Neural Oscillator and Symmetry Preserving Transformations are proposed for their computational efficiency. Even without reference motion data, this approach produces natural looking motion in real-time. Also the new motor invariant theory might shed light on the long time perception problem in biological research

    Structural attributes contributing to locomotor performance in the ostrich

    Get PDF
    As the fastest long-endurance runner, the bipedal ostrich (Struthio camelus) was selected as a prime model organism to investigate the physical attributes underlying this advanced locomotor performance. A specific integrative approach combining morphological, morphometric, kinematic and pedobarographic methods was developed. The comparative morphometric analysis of the hind limbs of all ratite species revealed that leg segment ratios in the ostrich are the most specialised for efficient locomotion, especially when taking into consideration its unique supra-jointed toe posture. In addition, the crural muscle mass is more concentrated towards the hip joint in the ostrich than in its ratite relatives. According to the Law of the Pendulum, this concentration of mass towards the pivot point – in concert with the relatively longest and lightest distal leg elements – represents a mechanical optimisation of limb swinging capacities. While musculature clearly drives limb movement, the passive guidance and constraint of motion range by ligamentous structures combined with joint surface contours allows a high level of energy output efficiency during all stages of locomotion and ensures articular stability during slow locomotion as well as high-speed performance. So far, the influence of these passive effects in locomotion has been largely ignored. In order to quantify the guiding effect of these anatomical structures, kinematic data of adult ostriches during walking and running were collected. Subsequently, these data were compared with results from manual manipulation experiments performed with the limbs of anatomical specimens – both fully intact and with muscles removed – leaving only the ligament system intact. This investigation revealed that the range of motion among leg segments was nearly identical in all sample groups, especially in regard to maximum extension values. This indicates that ostrich hind limb dynamics are managed to a significant degree by passive elements that ensure a controlled swing-plane with minimal deviation from an optimal attitude. Further dissections allowed some of these features to be described in detail, with an emphasis on functional-morphological examination of the intertarsal joint. The intertarsal joint contains a significant locking mechanism, briefly mentioned in historical documents, but described and functionally analysed herein for the first time. The functional examination qualified the interplay of three collateral ligaments, the tendinous M. fibularis brevis and specific joint surface protrusions as the basis for this effect which remains absent in smaller ground-dwelling bird species. A proximate quantification, based on comparative morphological and kinematic data, revealed function of Struthio's passively locked intertarsal joint as a potent stabiliser in the supporting limb during the ground-contact phase of locomotion. During stance phase, it is crucial that the supporting limb is stabilised internally and in relation to the substrate. As yet, no study exists concerning use and loading of the actual ground contact elements. The toes must absorb body mass, guarantee stable grip and provide energetic push off. Obvious specialisations of the ostrich's phalangeal complex include toe reduction (leaving only 3rd and 4th toe), claw reduction (only at 3rd toe) and a permanently elevated metatarsophalangeal joint. Using a relatively new methodology to examine in vivo toe function, pedobarography was employed on specifically trained ostriches to allow extensive collection of Centre of Pressure (CoP) and load distribution (LD) data. In contrast to a relatively predictable CoP trajectory at all speeds, conspicuous LD differences were observed between slow and fast trials. Load was distributed rather inconsistently during walking, while a typical tripod-like toe-print occurred in all running trials to presumably deliver additional stability during the comparatively short stance phase. Significant grip is provided by the highly directed impact of the 3rd toe claw-tip, suggesting its important function as a positional anchor during running. Pedobarographic analysis further showed the importance of the 4th toe as an outrigger to maintain balance, rendering a future reduction highly unlikely. In conclusion, the application of interdisciplinary methodologies allowed comprehensive data collection and integration of the model organism within its ecological context. The data gained from this thesis increases the current knowledge about ostrich locomotion by identifying distinct structural attributes as essential elements for extreme cursorial performance. The present data may alter existing models for calculation of the metabolic cost of terrestrial locomotion and aid in the reconstruction of theropod locomotion, as these branch sciences often overlook the important role of ligaments and passively-coupled motion cycles in reducing the cost of locomotion

    Towards understanding human locomotion

    Get PDF
    Die zentrale Frage, die in der vorliegenden Arbeit untersucht wurde, ist, wie man die komplizierte Dynamik des menschlichen Laufens besser verstehen kann. In der wissenschaftlichen Literatur werden zur Beschreibung von Laufbewegungen (Gehen und Rennen) oftmals minimalistische "Template"-Modelle verwendet. Diese sehr einfachen Modelle beschreiben nur einen ausgewählten Teil der Dynamik, meistens die Schwerpunktsbahn. In dieser Arbeit wird nun versucht, mittels Template-Modellen das Verständnis des Laufens voranzubringen. Die Analyse der Schwerpunktsbewegung durch Template-Modelle setzt eine präzise Bestimmung der Schwerpunktsbahn im Experiment voraus. Hierfür wird in Kapitel 2.3 eine neue Methode vorgestellt, welche besonders robust gegen die typischen Messfehler bei Laufexperimenten ist. Die am häfigsten verwendeten Template-Modelle sind das Masse-Feder-Modell und das inverse Pendel, welche zur Beschreibung der Körperschwerpunktsbewegung gedacht sind und das Drehmoment um den Schwerpunkt vernachlässigen. Zur Beschreibung der Stabilisierung der Körperhaltung (und damit der Drehimpulsbilanz) wird in Abschnitt 3.3 das Template-Modell "virtuelles Pendel" für das menschliche Gehen eingeführt und mit experimentellen Daten verglichen. Die Diskussion möglicher Realisierungsmechanismen legt dabei nahe, dass die Aufrichtung des menschlichen Gangs im Laufe der Evolution keine große mechanische Hürde war. In der Literatur wird oft versucht, Eigenschaften der Bewegung wie Stabilität durch Eigenschaften der Template-Modelle zu erklären. Dies wird in modifizierter Form auch in der vorliegen Arbeit getan. Hierzu wird zunächst eine experimentell bestimmte Schwerpunktsbewegung auf das Masse-Feder-Modell übertragen. Anschließend wird die Kontrollvorschrift der Schritt-zu-Schritt-Anpassung der Modellparameter identifiziert sowie eine geeignete Näherung angegeben, um die Stabilität des Modells, welches mit dieser Kontrollvorschrift ausgestattet wird, zu analysieren. Der Vergleich mit einer direkten Bestimmung der Stabilität aus einem Floquet-Modell zeigt qualitativ gute Übereinstimmung. Beide Ansätze führen auf das Ergebnis, dass beim langsamen menschlichen Rennen Störungen innerhalb von zwei Schritten weitgehend abgebaut werden. Zusammenfassend wurde gezeigt, wie Template-Modelle zum Verständnis der Laufbewegung beitragen können. Gerade die Identifikation der individuellen Kontrollvorschrift auf der Abstraktionsebene des Masse-Feder-Modells erlaubt zukünftig neue Wege, aktive Prothesen oder Orthesen in menschenähnlicher Weise zu steuern und ebnet den Weg, menschliches Rennen auf Roboter zu übertragen.Human locomotion is part of our everyday life, however the mechanisms are not well enough understood to be transferred into technical devices like orthoses, protheses or humanoid robots. In biomechanics often minimalistic so-called template models are used to describe locomotion. While these abstract models in principle offer a language to describe both human behavior and technical control input, the relation between human locomotion and locomotion of these templates was long unclear. This thesis focusses on how human locomotion can be described and analyzed using template models. Often, human running is described using the SLIP template. Here, it is shown that SLIP (possibly equipped with any controller) cannot show human-like disturbance reactions, and an appropriate extension of SLIP is proposed. Further, a new template to describe postural stabilization is proposed. Summarizing, this theses shows how simple template models can be used to enhance the understanding of human gait
    corecore