1,039 research outputs found
Design and Development of an Affordable Haptic Robot with Force-Feedback and Compliant Actuation to Improve Therapy for Patients with Severe Hemiparesis
The study describes the design and development of a single degree-of-freedom haptic robot, Haptic Theradrive, for post-stroke arm rehabilitation for in-home and clinical use. The robot overcomes many of the weaknesses of its predecessor, the TheraDrive system, that used a Logitech steering wheel as the haptic interface for rehabilitation. Although the original TheraDrive system showed success in a pilot study, its wheel was not able to withstand the rigors of use. A new haptic robot was developed that functions as a drop-in replacement for the Logitech wheel. The new robot can apply larger forces in interacting with the patient, thereby extending the functionality of the system to accommodate low-functioning patients. A new software suite offers appreciably more options for tailored and tuned rehabilitation therapies. In addition to describing the design of the hardware and software, the paper presents the results of simulation and experimental case studies examining the system\u27s performance and usability
Pointing control for the SPIDER balloon-borne telescope
We present the technology and control methods developed for the pointing
system of the SPIDER experiment. SPIDER is a balloon-borne polarimeter designed
to detect the imprint of primordial gravitational waves in the polarization of
the Cosmic Microwave Background radiation. We describe the two main components
of the telescope's azimuth drive: the reaction wheel and the motorized pivot. A
13 kHz PI control loop runs on a digital signal processor, with feedback from
fibre optic rate gyroscopes. This system can control azimuthal speed with <
0.02 deg/s RMS error. To control elevation, SPIDER uses stepper-motor-driven
linear actuators to rotate the cryostat, which houses the optical instruments,
relative to the outer frame. With the velocity in each axis controlled in this
way, higher-level control loops on the onboard flight computers can implement
the pointing and scanning observation modes required for the experiment. We
have accomplished the non-trivial task of scanning a 5000 lb payload
sinusoidally in azimuth at a peak acceleration of 0.8 deg/s, and a peak
speed of 6 deg/s. We can do so while reliably achieving sub-arcminute pointing
control accuracy.Comment: 20 pages, 12 figures, Presented at SPIE Ground-based and Airborne
Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume
914
An Open-Source 7-Axis, Robotic Platform to Enable Dexterous Procedures within CT Scanners
This paper describes the design, manufacture, and performance of a highly
dexterous, low-profile, 7 Degree-of-Freedom (DOF) robotic arm for CT-guided
percutaneous needle biopsy. Direct CT guidance allows physicians to localize
tumours quickly; however, needle insertion is still performed by hand. This
system is mounted to a fully active gantry superior to the patient's head and
teleoperated by a radiologist. Unlike other similar robots, this robot's fully
serial-link approach uses a unique combination of belt and cable drives for
high-transparency and minimal-backlash, allowing for an expansive working area
and numerous approach angles to targets all while maintaining a small in-bore
cross-section of less than . Simulations verified the system's
expansive collision free work-space and ability to hit targets across the
entire chest, as required for lung cancer biopsy. Targeting error is on average
on a teleoperated accuracy task, illustrating the system's sufficient
accuracy to perform biopsy procedures. The system is designed for lung biopsies
due to the large working volume that is required for reaching peripheral lung
lesions, though, with its large working volume and small in-bore
cross-sectional area, the robotic system is effectively a general-purpose
CT-compatible manipulation device for percutaneous procedures. Finally, with
the considerable development time undertaken in designing a precise and
flexible-use system and with the desire to reduce the burden of other
researchers in developing algorithms for image-guided surgery, this system
provides open-access, and to the best of our knowledge, is the first
open-hardware image-guided biopsy robot of its kind.Comment: 8 pages, 9 figures, final submission to IROS 201
Quadrupedal Robotics Platform
The purpose of this project is to take lessons learned from past MQPs, current industry products, and current research to create a quadrupedal platform capable of attaining unsupported walking. The team designed the platform to utilize series elastic actuation, force-sensing feet, and custom hardware to create a modular and easily expandable platform for future project use. CNC milling and water-jetting were used to manufacture the complete platform which was then vigorously tested under its own weight to determine its capabilities
Design of a six degree-of-freedom haptic hybrid platform manipultor
Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2010Includes bibliographical references (leaves: 97-103)Text in English; Abstract: Turkish and Englishxv, 115 leavesThe word Haptic, based on an ancient Greek word called haptios, means related with touch. As an area of robotics, haptics technology provides the sense of touch for robotic applications that involve interaction with human operator and the environment. The sense of touch accompanied with the visual feedback is enough to gather most of the information about a certain environment. It increases the precision of teleoperation and sensation levels of the virtual reality (VR) applications by exerting physical properties of the environment such as forces, motions, textures. Currently, haptic devices find use in many VR and teleoperation applications. The objective of this thesis is to design a novel Six Degree-of-Freedom (DOF) haptic desktop device with a new structure that has the potential to increase the precision in the haptics technology. First, previously developed haptic devices and manipulator structures are reviewed. Following this, the conceptual designs are formed and a hybrid structured haptic device is designed manufactured and tested. Developed haptic device.s control algorithm and VR application is developed in Matlab© Simulink. Integration of the mechanism with mechanical, electromechanical and electronic components and the initial tests of the system are executed and the results are presented. According to the results, performance of the developed device is discussed and future works are addressed
Design and Characterization of a Low-Cost and Efficient Torsional Spring for ES-RSEA
The design of torsional springs for series elastic actuators (SEAs) is challenging, especially when balancing good stiffness characteristics and efficient torque robustness. This study focuses on the design of a lightweight, low-cost, and compact torsional spring for use in the energy storage-rotary series elastic actuator (ES-RSEA) of a lumbar support exoskeleton. The exoskeleton is used as an assistive device to prevent lower back injuries. The torsion spring was designed following design for manufacturability (DFM) principles, focusing on minimal space and weight. The design process involved determining the potential topology and optimizing the selected topology parameters through the finite element method (FEM) to reduce equivalent stress. The prototype was made using a waterjet cutting process with a low-cost material (AISI-4140-alloy) and tested using a custom-made test rig. The results showed that the torsion spring had a linear torque-displacement relationship with 99% linearity, and the deviation between FEM simulation and experimental measurements was less than 2%. The torsion spring has a maximum torque capacity of 45.7 Nm and a 440 Nm/rad stiffness. The proposed torsion spring is a promising option for lumbar support exoskeletons and similar applications requiring low stiffness, low weight-to-torque ratio, and cost-effectiveness
- …