Open source software development: some historical perspectives

software development, historical

Process analysis of pressurized oxy-coal power cycle for carbon capture application integrated with liquid air power generation and binary cycle engines

In this paper, the thermodynamic advantage of integrating liquid air power generation (LAPG) process and binary cycle waste heat recovery technology to a standalone pressurized oxy-coal combustion supercritical steam power generation cycle is investigated through modeling and simulation using Aspen Plus® simulation software version 8.4. The study shows that the integration of LAPG process and the use of binary cycle heat engine which convert waste heat from compressor exhaust to electricity, in a standalone pressurized oxy-coal combustion supercritical steam power generation cycle improves the thermodynamic efficiency of the pressurized oxy-coal process. The analysis indicates that such integration can give about 12–15% increase in thermodynamic efficiency when compared with a standalone pressurized oxy-coal process with or without CO2 capture. It was also found that in a pressurized oxy-coal process, it is better to pump the liquid oxygen from the cryogenic ASU to a very high pressure prior to vapourization in the cryogenic ASU main heat exchanger and subsequently expand the gaseous oxygen to the required combustor pressure than either compressing the atmospheric gaseous oxygen produced from the cryogenic ASU directly to the combustor pressure or pumping the liquid oxygen to the combustor pressure prior to vapourization in the cryogenic ASU main heat exchanger. The power generated from the compressor heat in the flue gas purification, carbon capture and compression unit using binary cycle heat engine was also found to offset about 65% of the power consumed in the flue gas cleaning and compression process. The work presented here shows that there is a synergistic and thermodynamic advantage of utilizing the nitrogen-rich stream from the cryogenic ASU of an oxy-fuel power generation process for power generation instead of discarding it as a waste stream

Effect of steam addition on the flow field and NOx emissions for Jet-A in an aircraft combustor

The steam injection technology for aircraft engines is gaining rising importance because of the strong limitations imposed by the legislation for NOx reduction in airports. In order to investigate the impact of steam addition on combustion and NOx emissions, an integrated performance-CFD-chemical reactor network (CRN) methodology was developed. The CFD results showed steam addition reduced the high temperature size and the radical pool moved downstream. Then different post-processing techniques are employed and CRN is generated to predict NOx emissions. This network consists of 14 chemical reactor elements and the results were in close agreement with the ICAO databank. The established CRN model was then used for steam addition study and the results showed under air/steam mixture atmosphere, high steam content could push the NOx formation region to the post-flame zone and a large amount of the NOx emission could be reduced when the steam mass fraction is quite high

Effect of steam addition on gas turbine combustor design and performance

Adding steam influences the combustion process inside the combustor, which should be taken into account during combustor design. The design of combustor has long been the most challenging process. This study integrated the gas turbine performance with the combustor design, and formulated a detailed procedure for single annular combustors with steam addition consideration in particular. To accomplish this, a computer code has been developed based on the design procedures. The design model could provide the combustor geometry and the combustor performance. The inlet parameters for combustor design are obtained and validated through the calculation of gas turbine engine performance provided by our own home code. The model predictions are compared with operational and configuration data from two real engines and show reasonably good accuracy. The influence of steam addition on combustor design is investigated and results showed the variation of geometrical size is highest for components where intense combustion takes place while the design is almost kept the same for components where only pure flow exists. After conforming the feasibility of the combustor design code, we investigated the effects of steam addition on combustor performance. It revealed that steam injection is an effective way to reduce the temperature in the burner while other performance like the total pressure loss would be slightly deteriorated

Advanced cogeneration research study: Executive summary

This study provides a broad based overview of selected areas relevant to the development of a comprehensive Southern California Edison (SCE) advanced cogeneration project. The areas studied are: (1) Cogeneration potential in the SCE service territory; (2) Advanced cogeneration technologies; and (3) Existing cogeneration computer models. An estimated 3700 MW sub E could potentially be generated from existing industries in the Southern California Edison service territory using cogeneration technology. Of this total, current technology could provide 2600 MW sub E and advanced technology could provide 1100 MW sub E. The manufacturing sector (SIC Codes 20-39) was found to have the highest average potential for current cogeneration technology. The mining sector (SIC Codes 10-14) was found to have the highest potential for advanced technology

Cogeneration computer model assessment: Advanced cogeneration research study

Cogeneration computer simulation models to recommend the most desirable models or their components for use by the Southern California Edison Company (SCE) in evaluating potential cogeneration projects was assessed. Existing cogeneration modeling capabilities are described, preferred models are identified, and an approach to the development of a code which will best satisfy SCE requirements is recommended. Five models (CELCAP, COGEN 2, CPA, DEUS, and OASIS) are recommended for further consideration

Collective Invention during the British Industrial Revolution The Case of the Cornish Pumping Engine

In this paper, we argue that together with individual inventors and firms, what Robert C. Allen (1983) has termed as collective invention settings (that is settings in which rival firms freely release each other pertinent technical information), were also a crucial source of innovation in the industrial revolution period. Until now, this has been very little considered in the literature. This paper focuses on one of these cases: the Cornish mining district. In Cornwall, during the early nineteenth century, a notable collective invention setting, gradually emerged. This case is particularly remarkable because it was capable of generating a continuous and sustained flow of improvements in steam pumping technology which in the end greatly contributed to improve the thermodynamic efficiency of the steam engine. In this paper we study in detail the specific economic circumstances that led to the formation of this collective invention setting and we analyses its consequences for the rate of technological innovationCollective inventions, information sharing, case study

A comparative assessment of solar thermal electric power plants in the 1-10 MWe range

The candidate power system technologies were ranked in terms of the cost of electric energy each system produces. In all cases, it was assumed that development programs would result in mature power plant systems that could be commercially manufactured. The results of the study, a brief description of the systems examined, and the methodologies used are presented

Technological Breakthroughs and Productivity Growth

This study consists of an examination of productivity growth following three major technological breakthroughs: the steam power revolution, electrification and the ICT revolution. The distinction between sectors producing and sectors using the new technology is emphasized. A major finding for all breakthroughs is that there is a long lag from the time of the original invention until a substantial increase in the rate of productivity growth can be observed. There is also strong evidence of rapid price decreases for steam engines, electricity, electric motors and ICT products. However, there is no persuasive direct evidence that the steam engine producing industry and electric machinery had particularly high productivity growth rates. For the ICT revolution the highest productivity growth rates are found in the ICT-producing industries. We suggest that one explanation could be that hedonic price indexes are not used for the steam engine and the electric motor. Still, it is likely that the rate of technological development has been much more rapid during the ICT revolution compared to any of the previous breakthroughs.electrification; general purpose technologies; ICT revolution; productivity growth; steam power; Technological breakthroughs