2,379 research outputs found
Recommended from our members
Ontology engineering for simulation component reuse
Commercial-off-the-shelf (COTS) simulation packages (CSPs) are widely used in industry, although they have yet to operate across organizational boundaries. Reuse across organizations is restricted by the same semantic issues that restrict the inter-organizational use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architectures provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontologies to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development of an ontology, connector software and web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organizational simulation, adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Recommended from our members
Semantic web services for simulation component reuse and interoperability: An ontology approach
Commercial-off-the-shelf (COTS) Simulation Packages (CSPs) are widely used in industry primarily due to economic factors associated with developing proprietary software platforms. Regardless of their widespread use, CSPs have yet to operate across organizational boundaries. The limited reuse and interoperability of CSPs are affected by the same semantic issues that restrict the inter-organizational use of software components and web services. The current representations of Web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging Semantic Web. The authors present new research that partially alleviates the problem of limited semantic reuse and interoperability of simulation components in CSPs. Semantic models, in the form of ontologies, utilized by the authors’ Web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through a simulation component ontology that is used to identify required components at varying levels of granularity (i.e. including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The research presented here is based on the development of an ontology, connector software, and a Web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organizational simulation, by adopting a less intrusive interface between participants Although specific to CSPs this work has wider implications for the simulation community. The reason being that the community as a whole stands to benefit through from an increased awareness of the state-of-the-art in Software Engineering (for example, ontology-supported component discovery and reuse, and service-oriented computing), and it is expected that this will eventually lead to the development of a unique Software Engineering-inspired methodology to build simulations in future
Semantic web service architecture for simulation model reuse
COTS simulation packages (CSPs) have proved popular in an industrial setting with a number of software vendors. In contrast, options for re-using existing models seem more limited. Re-use of simulation component models by collaborating organizations is restricted by the same semantic issues however that restrict the inter-organization use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontology to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development of ontology, connector software and web service discovery architecture in order to understand how such ontology are created, maintained and subsequently used for simulation model reuse. The ontology is extracted from health service simulation - comprising hospitals and the National Blood Service. The ontology engineering framework and discovery architecture provide a novel approach to inter- organization simulation, uncovering domain semantics and adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Recommended from our members
A Web Services Component Discovery and Deployment Architecture for Simulation Model Reuse
CSPs are widely used in industry, although have yet to operate across organizational boundaries. Reuse across organizations is restricted by the same semantic issues that restrict the inter-organization use of web services. The current representations of web components are predominantly syntactic in nature lacking the fundamental semantic underpinning required to support discovery on the emerging semantic web. Semantic models, in the form of ontology, utilized by web service discovery and deployment architecture provide one approach to support simulation model reuse. Semantic interoperation is achieved through the use of simulation component ontology to identify required components at varying levels of granularity (including both abstract and specialized components). Selected simulation components are loaded into a CSP, modified according to the requirements of the new model and executed. The paper presents the development carried out within CSPI-PDG and Fluidity Group at Brunel University, of an ontology, connector software and web service discovery architecture. The ontology is extracted from simulation scenarios involving airport, restaurant and kitchen service suppliers. The ontology engineering framework and discovery architecture provide a novel approach to inter-organization simulation, adopting a less intrusive interface between participants. Although specific to CSPs the work has wider implications for the simulation community
Commercial-off-the-shelf simulation package interoperability: Issues and futures
Commercial-Off-The-Shelf Simulation Packages (CSPs) are widely used in industry to simulate discrete-event models. Interoperability of CSPs requires the use of distributed simulation techniques. Literature presents us with many examples of achieving CSP interoperability using bespoke solutions. However, for the wider adoption of CSP-based distributed simulation it is essential that, first and foremost, a standard for CSP interoperability be created, and secondly, these standards are adhered to by the CSP vendors. This advanced tutorial is on an emerging standard relating to CSP interoperability. It gives an overview of this standard and presents case studies that implement some of the proposed standards. Furthermore, interoperability is discussed in relation to large and complex models developed using CSPs that require large amount of computing resources. It is hoped that this tutorial will inform the simulation community of the issues associated with CSP interoperability, the importance of these standards and its future
Engineering Crowdsourced Stream Processing Systems
A crowdsourced stream processing system (CSP) is a system that incorporates
crowdsourced tasks in the processing of a data stream. This can be seen as
enabling crowdsourcing work to be applied on a sample of large-scale data at
high speed, or equivalently, enabling stream processing to employ human
intelligence. It also leads to a substantial expansion of the capabilities of
data processing systems. Engineering a CSP system requires the combination of
human and machine computation elements. From a general systems theory
perspective, this means taking into account inherited as well as emerging
properties from both these elements. In this paper, we position CSP systems
within a broader taxonomy, outline a series of design principles and evaluation
metrics, present an extensible framework for their design, and describe several
design patterns. We showcase the capabilities of CSP systems by performing a
case study that applies our proposed framework to the design and analysis of a
real system (AIDR) that classifies social media messages during time-critical
crisis events. Results show that compared to a pure stream processing system,
AIDR can achieve a higher data classification accuracy, while compared to a
pure crowdsourcing solution, the system makes better use of human workers by
requiring much less manual work effort
Recommended from our members
Investigating distributed simulation at the Ford motor company
Engine production is a complex process that requires the manufacturing and assembly of a wide variety of components to create a varied product mix. Simulation plays a key role in the planning process of a new production line to determine if it can meet expected demand. However, these simulations can be very time consuming and can often take up to a day to execute a single run. This paper investigates how distributed simulation based on the IEEE 1516 High Level Architecture and the emerging standard COTS Simulation Package Interoperability Product Development Group (CSPI-PDG) Type I Interoperability Reference Model could be used to reduce the time taken for a single simulation run. CSP interoperability and the problem of integrating CSPs with HLA software (the runtime infrastructure) are presented. New prototype benchmarking software, the COTS Simulation Package Emulator (CSPE), which is being developed to investigate distributed simulation problems, is discussed. The paper then develops a case study of how this was used to investigate the feasibility of using distributed simulation at Ford. The paper discusses results obtained from this case study and suggests that distributed simulation could indeed be beneficial to Ford
Facilitating the analysis of a UK national blood service supply chain using distributed simulation
In an attempt to investigate blood unit ordering policies, researchers have created a discrete-event model of the UK National Blood Service (NBS) supply chain in the Southampton area of the UK. The model has been created using Simul8, a commercial-off-the-shelf discrete-event simulation package (CSP). However, as more hospitals were added to the model, it was discovered that the length of time needed to perform a single simulation severely increased. It has been claimed that distributed simulation, a technique that uses the resources of many computers to execute a simulation model, can reduce simulation runtime. Further, an emerging standardized approach exists that supports distributed simulation with CSPs. These CSP Interoperability (CSPI) standards are compatible with the IEEE 1516 standard The High Level Architecture, the defacto interoperability standard for distributed simulation. To investigate if distributed simulation can reduce the execution time of NBS supply chain simulation, this paper presents experiences of creating a distributed version of the CSP Simul8 according to the CSPI/HLA standards. It shows that the distributed version of the simulation does indeed run faster when the model reaches a certain size. Further, we argue that understanding the relationship of model features is key to performance. This is illustrated by experimentation with two different protocols implementations (using Time Advance Request (TAR) and Next Event Request (NER)). Our contribution is therefore the demonstration that distributed simulation is a useful technique in the timely execution of supply chains of this type and that careful analysis of model features can further increase performance
- …