Recursive quantum repeater networks

Internet-scale quantum repeater networks will be heterogeneous in physical technology, repeater functionality, and management. The classical control necessary to use the network will therefore face similar issues as Internet data transmission. Many scalability and management problems that arose during the development of the Internet might have been solved in a more uniform fashion, improving flexibility and reducing redundant engineering effort. Quantum repeater network development is currently at the stage where we risk similar duplication when separate systems are combined. We propose a unifying framework that can be used with all existing repeater designs. We introduce the notion of a Quantum Recursive Network Architecture, developed from the emerging classical concept of 'recursive networks', extending recursive mechanisms from a focus on data forwarding to a more general distributed computing request framework. Recursion abstracts independent transit networks as single relay nodes, unifies software layering, and virtualizes the addresses of resources to improve information hiding and resource management. Our architecture is useful for building arbitrary distributed states, including fundamental distributed states such as Bell pairs and GHZ, W, and cluster states.Comment: 14 page

On the challenges of establishing disjoint QoS IP/MPLS paths across multiple domains

MPLS is being actively adopted as the core switching infrastructure at the intradomain level. This trend is mainly attributable to the undeniable potential of MPLS in terms of virtual private networks (VPNs) management, traffic engineering (TE), QoS delivery, path protection, and fast recovery from network failures. However, little progress has been made to attain the expected extension of MPLS label-switched paths (LSPs) across domain boundaries. Among the problems that remain unsolved is how to efficiently find and establish primary and protection interdomain LSPs for mission-critical services subject to QoS constraints. This article explores the major limitations hindering the deployment of these kinds of LSPs across multiple domains, in the context of the current interdomain network model. We describe the critical problems faced by the research community, and present our vision on how to rationally overcome some of the problems exposed. Our perspective is that we should be prepared for rather coarse-grained solutions as long as we need to coexist with the current interdomain network modelPostprint (published version

Multi-path BGP: motivations and solutions

Although there are many reasons towards the adoption of a multi-path routing paradigm in the Internet, nowadays the required multi-path support is far from universal. It is mostly limited to some domains that rely on IGP features to improve load distribution in their internal infrastructure or some multi-homed parties that base their load balance on traffic engineering. This chapter explains the motivations for a multi-path routing Internet scheme, commenting the existing alternatives and detailing two new proposals. Part of this work has been done within the framework of the Trilogy research and development project, whose main objectives are also commented in the chapter.Part of this work has been done within the framework of the Trilogy research and development project. The different research partners of this project are: British Telecom, Deutsche Telekom, NEC Europe, Nokia, Roke Manor Research Limited, Athens University of Economics and Business, University Carlos III of Madrid, University College London, Universit Catholique de Louvain and Stanford University.European Community's Seventh Framework ProgramEn prens

On SRv6 Security

SRv6 is a routing architecture that can provide hybrid cooperation between a centralized network controller and network nodes: IPv6 routers maintain the multi-hop ECMP-aware segments, whereas the controller, responsible for the Traffic Engineering policy, combines them to form a source-routed path through the network. Since the state of the flow is defined at the ingress to the network and then is contained in a specific packet header, called Segment Routing Header (SRH), the importance of such a header itself is vital. Motivated by the increasing success and widespread deployment of such approaches and technologies, this paper introduces the context and discusses some of the issues tied to possible tampering with the Segment Routing Header content. Finally, some details of an experimental testbed aimed at evaluating the above issues are provided

Application of overlay techniques to network monitoring

Measurement and monitoring are important for correct and efficient operation of a network, since these activities provide reliable information and accurate analysis for characterizing and troubleshooting a network’s performance. The focus of network measurement is to measure the volume and types of traffic on a particular network and to record the raw measurement results. The focus of network monitoring is to initiate measurement tasks, collect raw measurement results, and report aggregated outcomes. Network systems are continuously evolving: besides incremental change to accommodate new devices, more drastic changes occur to accommodate new applications, such as overlay-based content delivery networks. As a consequence, a network can experience significant increases in size and significant levels of long-range, coordinated, distributed activity; furthermore, heterogeneous network technologies, services and applications coexist and interact. Reliance upon traditional, point-to-point, ad hoc measurements to manage such networks is becoming increasingly tenuous. In particular, correlated, simultaneous 1-way measurements are needed, as is the ability to access measurement information stored throughout the network of interest. To address these new challenges, this dissertation proposes OverMon, a new paradigm for edge-to-edge network monitoring systems through the application of overlay techniques. Of particular interest, the problem of significant network overheads caused by normal overlay network techniques has been addressed by constructing overlay networks with topology awareness - the network topology information is derived from interior gateway protocol (IGP) traffic, i.e. OSPF traffic, thus eliminating all overlay maintenance network overhead. Through a prototype that uses overlays to initiate measurement tasks and to retrieve measurement results, systematic evaluation has been conducted to demonstrate the feasibility and functionality of OverMon. The measurement results show that OverMon achieves good performance in scalability, flexibility and extensibility, which are important in addressing the new challenges arising from network system evolution. This work, therefore, contributes an innovative approach of applying overly techniques to solve realistic network monitoring problems, and provides valuable first hand experience in building and evaluating such a distributed system

Segment Routing v6 - Security Issues and Experimental Results

SRv6 can provide hybrid cooperation between a centralized network controller and network nodes. IPv6 routers maintain multi-hop ECMP-aware segments, whereas the controller establishes a source-routed path through the network. Since the state of the flow is defined at the ingress to the network and then is contained in a specific packet header, called Segment Routing Header (SRH), the importance of such a header itself is vital. Motivated by the need to study and investigate this technology, this paper discusses some security-related issues of Segment Routing. A SRv6 capable experimental testbed is built and detailed. Finally, an experimental test campaign is performed and results are evaluated and discussed

Intra-Domain Pathlet Routing

Internal routing inside an ISP network is the foundation for lots of services that generate revenue from the ISP's customers. A fine-grained control of paths taken by network traffic once it enters the ISP's network is therefore a crucial means to achieve a top-quality offer and, equally important, to enforce SLAs. Many widespread network technologies and approaches (most notably, MPLS) offer limited (e.g., with RSVP-TE), tricky (e.g., with OSPF metrics), or no control on internal routing paths. On the other hand, recent advances in the research community are a good starting point to address this shortcoming, but miss elements that would enable their applicability in an ISP's network. We extend pathlet routing by introducing a new control plane for internal routing that has the following qualities: it is designed to operate in the internal network of an ISP; it enables fine-grained management of network paths with suitable configuration primitives; it is scalable because routing changes are only propagated to the network portion that is affected by the changes; it supports independent configuration of specific network portions without the need to know the configuration of the whole network; it is robust thanks to the adoption of multipath routing; it supports the enforcement of QoS levels; it is independent of the specific data plane used in the ISP's network; it can be incrementally deployed and it can nicely coexist with other control planes. Besides formally introducing the algorithms and messages of our control plane, we propose an experimental validation in the simulation framework OMNeT++ that we use to assess the effectiveness and scalability of our approach.Comment: 13 figures, 1 tabl

Exploiting the power of multiplicity: a holistic survey of network-layer multipath

The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work

OBGP based QoS analysis for optical virtual private network connection setup

In a computer network, clients work with different applications; hence there are requirement of speed, bandwidth, delay etc. The parameters are called as Quality of Service (QoS) parameters. QoS guarantees the performance in a network. To meet the growing demand of Optical Virtual Private Network (OVPN), the Internet Service Providers (ISP) should use multiple techniques which ensure the Quality of Service. For performing data communication between nodes in a network the path to be followed should be known. In this project, BGP/OBGP protocols have been discussed and using this protocol, paths have been found between routers. Then the optimal path is found out based on the path attributes. Also the paths are examined for QoS parameters and the best path is chosen. An OVPN model has been discussed and modified for performing Routing & Wavelength Assignment (RWA) function based on QoS requirement which is expressed in terms of Q-factor and trying to achieve minimum blocking probability of path. The objective of this project is to assign best connection between nodes as per the request from clients operating with various applications