3,175 research outputs found
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
Future work on harmonics : some expert opinions part I : wind and solar power
A workshop on power system harmonics was organized in Stockholm in January 2014. On the agenda was among others a discussion on what are the main issues on harmonics at the moment and in the near future. The results of this discussion are summarized in this paper and some of the issues are discussed in more detail in this paper and in its companion paper. This paper discusses emission from wind and solar power as well as advantages and disadvantages of active and passive filters
Power Converters and Power Quality
This paper discusses the subject of power quality for power converters. The
first part gives an overview of most of the common disturbances and power
quality issues in electrical networks for particle accelerators, and explains
their consequences for accelerator operation. The propagation of asymmetrical
network disturbances into a network is analysed. Quantitative parameters for
network disturbances in a typical network are presented, and immunity levels
for users' electrical equipment are proposed. The second part of this paper
discusses the technologies and strategies used in particle accelerator networks
for power quality improvement. Particular focus is given to networks supplying
loads with cycling active and reactive power.Comment: 26 pages, contribution to the 2014 CAS - CERN Accelerator School:
Power Converters, Baden, Switzerland, 7-14 May 201
Improving Harmonic Measurements with Instrument Transformers: a Comparison Among Two Techniques
The measurement of harmonics is essential in modern power systems in order to perform distortion level assessment, disturbances source detection and mitigation, etc. In this context, the role of Instrument Transformers (ITs) is crucial, as they are key elements in every power systems measuring instrument. However, inductive ITs, which are still the most widely used, suffer from both a filtering behavior due to their dynamics and from nonlinear effects due to their iron core. The target of this paper is to deeply analyze the performance of two digital signal processing techniques, recently proposed in literature, aimed at mitigating their nonlinear behavior: they are SINDICOMP and the compensation of harmonic distortion through polynomial modeling in the frequency domain. Their performance in improving the measurement of voltage harmonics are analyzed through numerical simulations, by adopting waveforms that can be typically encountered in power systems during normal operating conditions
Theory and Experimental Validation of Two Techniques for Compensating VT Nonlinearities
Inductive instrument transformers (ITs) are still the most used voltage and current sensors in power systems. Among the numerous applications that require their use, one of the most important is surely represented by harmonics measurement. In this case, the recent literature shows that, since they suffer from both a filtering behavior due to their dynamics and from nonlinear effects produced by their iron core, they can introduce errors up to some percent. This article wants to deeply investigate, in the very same experimental conditions, about the performance of two digital signal processing techniques, recently introduced for the improvement of harmonics measurements performed through ITs, namely, SINusoidal characterization for DIstortion COMPensation (SINDICOMP) and compensation of harmonic distortion through polynomial modeling in the frequency domain (PHD). These methods have been applied to two different voltage transformers, having different specifications, by using two measurement setups based on different architectures. The impact of the voltage generator employed during the identification on the achieved accuracy is theoretically and experimentally evaluated. Modified versions of SINDICOMP and PHD compensation, which are more robust against nonidealities of the measurement setup, are presented. The performances of the techniques are evaluated by adopting voltage waveforms similar to those that can be encountered during the normal operation in a real distribution grid
Adaptive Polynomial Harmonic Distortion Compensation in Current and Voltage Transformers Through Iteratively Updated QR Factorization
Measuring current and voltage harmonics has paramount importance for improving the power quality of distribution grids. However, the achieved accuracy strongly depends on the adopted instrument transformer (IT). This article proposes an adaptive technique that enables an effective compensation of both the filtering behavior and the harmonic distortion (HD) introduced by current and voltage transformers (VTs), namely the strongest nonlinear effect at low-order harmonics. The approach is based on a flexible, linear in the parameters polynomial modeling of HD in the frequency domain. Model complexity can be different from one harmonic to the other, and it is selected through an automatic iterative process to suit the nonlinear behavior at each specific harmonic order, while avoiding overfitting. In particular, the number of parameters is increased by progressively updating the QR factorization of the regressor matrix trough Householder reflections until a convergence condition is reached. Experimental tests performed on an inductive VT and current transformer (CT) highlight the effectiveness of the approach
Distributed photovoltaic systems: Utility interface issues and their present status
Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design
- …